[1] Blakey-Milner, B. et al. Metal additive manufacturing in aerospace: a review. Materials & Design 209, 110008 (2021).
[2] Yan, Q. et al. A review of 3D printing technology for medical applications. Engineering 4, 729-742 (2018). doi: 10.1016/j.eng.2018.07.021
[3] Pagac, M. et al. A review of vat photopolymerization technology: materials, applications, challenges, and future trends of 3D printing. Polymers 13, 598 (2021). doi: 10.3390/polym13040598
[4] Hull, C. W. Apparatus for production of three-dimensional objects by stereolithography. (1984).
[5] Sun, C. et al. Projection micro-stereolithography using digital micro-mirror dynamic mask. Sensors and Actuators A:Physical 121, 113-120 (2005). doi: 10.1016/j.sna.2004.12.011
[6] Tumbleston, J. R. et al. Continuous liquid interface production of 3D objects. Science 347, 1349-1352 (2015). doi: 10.1126/science.aaa2397
[7] Baldacchini, T. Three-Dimensional Microfabrication Using Two-Photon Polymerization: A Volume in Micro and Nano Technologies. (Norwich: William Andrew, 2016).
[8] Saha, S. K. et al. Scalable submicrometer additive manufacturing. Science 366, 105-109 (2019). doi: 10.1126/science.aax8760
[9] Somers, P. et al. Rapid, continuous projection multi-photon 3D printing enabled by spatiotemporal focusing of femtosecond pulses. Light:Science & Applications 10, 199 (2021).
[10] Hahn, V. et al. Two-step absorption instead of two-photon absorption in 3D nanoprinting. Nature Photonics 15, 932-938 (2021). doi: 10.1038/s41566-021-00906-8
[11] Hahn, V. et al. Light-sheet 3D microprinting via two-colour two-step absorption. Nature Photonics 16, 784-791 (2022). doi: 10.1038/s41566-022-01081-0
[12] Regehly, M. et al. Xolography for linear volumetric 3D printing. Nature 588, 620-624 (2020). doi: 10.1038/s41586-020-3029-7
[13] Kelly, B. E. et al. Volumetric additive manufacturing via tomographic reconstruction. Science 363, 1075-1079 (2019). doi: 10.1126/science.aau7114
[14] Bernal, P. N. et al. Volumetric bioprinting of complex living-tissue constructs within seconds. Advanced Materials 31, 1904209 (2019). doi: 10.1002/adma.201904209
[15] Loterie, D., Delrot, P. & Moser, C. High-resolution tomographic volumetric additive manufacturing. Nature Communications 11, 852 (2020). doi: 10.1038/s41467-020-14630-4
[16] Kak, A. C. & Slaney, M. Principles of Computerized Tomographic Imaging. (Philadelphia: Society for Industrial and Applied Mathematics, 2001).
[17] Ligon, S. C. et al. Strategies to reduce oxygen inhibition in photoinduced polymerization. Chemical Reviews 114, 557-589 (2014). doi: 10.1021/cr3005197
[18] Madrid-Wolff, J. et al. Controlling light in scattering materials for volumetric additive manufacturing. Advanced Science 9, 2105144 (2022). doi: 10.1002/advs.202105144
[19] Rackson, C. M. et al. Object-space optimization of tomographic reconstructions for additive manufacturing. Additive Manufacturing 48, 102367 (2021). doi: 10.1016/j.addma.2021.102367
[20] Bhattacharya, I., Toombs, J. & Taylor, H. High fidelity volumetric additive manufacturing. Additive Manufacturing 47, 102299 (2021). doi: 10.1016/j.addma.2021.102299
[21] Bernal, P. N. et al. Volumetric bioprinting of organoids and optically tuned hydrogels to build liver-like metabolic biofactories. Advanced Materials 34, 2110054 (2022). doi: 10.1002/adma.202110054
[22] Bird, R. B. Transport phenomena. Applied Mechanics Reviews 55, R1-R4 (2002). doi: 10.1115/1.1424298
[23] Donkers, R. L. & Leaist, D. G. Diffusion of free radicals in solution. TEMPO,diphenylpicrylhydrazyl,and nitrosodisulfonate. The Journal of Physical Chemistry B 101, 304-308 (1997).
[24] Ma, X. Y. et al. 3D printed micro-scale force gauge arrays to improve human cardiac tissue maturation and enable high throughput drug testing. Acta Biomaterialia 95, 319-327 (2019).
[25] Cook, C. C. et al. Highly tunable thiol-ene photoresins for volumetric additive manufacturing. Advanced Materials 32, 2003376 (2020). doi: 10.1002/adma.202003376
[26] Limberg, D. K., Kang, J. H. & Hayward, R. C. Triplet–triplet annihilation photopolymerization for high-resolution 3D printing. Journal of the American Chemical Society 144, 5226-5232 (2022). doi: 10.1021/jacs.1c11022
[27] Kalender, W. A. et al. Spiral volumetric CT with single-breath-hold technique, continuous transport, and continuous scanner rotation. Radiology 176, 181-183 (1990). doi: 10.1148/radiology.176.1.2353088
[28] Rackson, C. M. et al. Latent image volumetric additive manufacturing. Optics Letters 47, 1279-1282 (2022). doi: 10.1364/OL.449220
[29] Orth, A. et al. On-the-fly 3D metrology of volumetric additive manufacturing. Additive Manufacturing 56, 102869 (2022). doi: 10.1016/j.addma.2022.102869
[30] Webber, D. et al. Versatile volumetric additive manufacturing with 3D ray tracing. Optics Express 31, 5531-5546 (2023). doi: 10.1364/OE.481318
[31] Rizzo, R. et al. Optimized photoclick (bio)resins for fast volumetric bioprinting. Advanced Materials 33, 2102900 (2021). doi: 10.1002/adma.202102900
[32] Salajeghe, R. et al. Numerical modeling of part sedimentation during volumetric additive manufacturing. Additive Manufacturing 66, 103459 (2023). doi: 10.1016/j.addma.2023.103459
[33] Orth, A. et al. Correcting ray distortion in tomographic additive manufacturing. Optics Express 29, 11037-11054 (2021). doi: 10.1364/OE.419795
[34] Loterie, D. , Delrot, P. & Moser, C. Volumetric 3D printing of elastomers by tomographic back-projections. (2018).