[1] Yan, Z. J. et al. Microfluidic-based patterning of high-resolution, uniform luminescent, and low optical crosstalk quantum dot arrays for full-color micro-LED displays. ACS Photonics 12, 5443-5452 (2025). doi: 10.1021/acsphotonics.5c01016
[2] Chang, W. et al. Concurrent self-assembly of RGB microLEDs for next-generation displays. Nature 617, 287-291 (2023). doi: 10.1038/s41586-023-05889-w
[3] Pandey, A., Reddeppa, M. & Mi, Z. T. Recent progress on micro-LEDs. Light: Advanced Manufacturing 4, 519-542 (2023). doi: 10.37188/lam.2023.031
[4] Lee, K. H. et al. Highly efficient, color-pure, color-stable blue quantum dot light-emitting devices. ACS Nano 7, 7295-7302 (2013). doi: 10.1021/nn402870e
[5] Xiong, J. H. et al. Augmented reality and virtual reality displays: emerging technologies and future perspectives. Light: Science & Applications 10, 216 (2021). doi: 10.1038/s41377-021-00658-8
[6] Park, J. et al. Electrically driven mid-submicrometre pixelation of InGaN micro-light-emitting diode displays for augmented-reality glasses. Nature Photonics 15, 449-455 (2021). doi: 10.1038/s41566-021-00783-1
[7] Seo, S. J., Park, S. & Jang, H. W. Flexible micro-LEDs: advanced fabrication techniques and applications. Electronic Materials Letters 21, 311-330 (2025). doi: 10.1007/s13391-025-00559-7
[8] Duan, S. S. et al. Water-modulated biomimetic hyper-attribute-gel electronic skin for robotics and skin-attachable wearables. ACS Nano 17, 1355-1371 (2023). doi: 10.1021/acsnano.2c09851
[9] Miao, W. C. et al. Microdisplays: mini‐LED, micro‐OLED, and micro‐LED. Advanced Optical Materials 12, 2300112 (2024). doi: 10.1002/adom.202300112
[10] Shin, J. et al. Vertical full-colour micro-LEDs via 2D materials-based layer transfer. Nature 614, 81-87 (2023). doi: 10.1038/s41586-022-05612-1
[11] Huang, J. H. et al. Monolithic integration of full‐color microdisplay screen with sub‐5 µm quantum‐dot pixels. Advanced Materials 36, 2409025 (2024). doi: 10.1002/adma.202409025
[12] Behrman, K. & Kymissis, I. Micro light-emitting diodes. Nature Electronics 5, 564-573 (2022). doi: 10.1038/s41928-022-00828-5
[13] Ryu, J. E. et al. Technological breakthroughs in chip fabrication, transfer, and color conversion for high‐performance micro‐LED displays. Advanced Materials 35, 2204947 (2023). doi: 10.1002/adma.202204947
[14] Yu, B. H. et al. Challenges of high-yield manufacture in micro-light-emitting diodes displays: chip fabrication, mass transfer, and detection. Journal of Physics D: Applied Physics 57, 463001 (2024). doi: 10.1088/1361-6463/ad6ce3
[15] Wang, Y. H. et al. Patterning technologies of quantum dots for color-conversion micro-LED display applications. Nanoscale 17, 1764-1789 (2025). doi: 10.1039/d4nr03925d
[16] Yin, Y. M. et al. Full‐color micro‐LED display with CsPbBr3 perovskite and CdSe quantum dots as color conversion layers. Advanced Materials Technologies 5, 2000251 (2020). doi: 10.1002/admt.202000251
[17] Jing, Y. Y. et al. Photolithographic fabrication of high-resolution Micro-QLEDs towards color-conversion microdisplay. Light: Science & Applications 14, 370 (2025). doi: 10.1038/s41377-025-02000-y
[18] Shi, L. F. et al. In situ inkjet printing strategy for fabricating perovskite quantum dot patterns. Advanced Functional Materials 29, 1903648 (2019). doi: 10.1002/adfm.201903648
[19] Zhou, X. C. et al. Direct synthesis of perovskite quantum dot photoresist for direct photolithography. Angewandte Chemie International Edition 64, e202413741 (2025). doi: 10.1002/anie.202413741
[20] Gong, T. et al. Rare earth-doped perovskite quantum dot microspheres for micro-LED displays. ACS Energy Letters 10, 5012-5019 (2025). doi: 10.1021/acsenergylett.5c02209
[21] Yang, X. et al. Super retina TFT based full color microLED display via laser mass transfer. Science China Information Sciences 67, 210401 (2024). doi: 10.1007/s11432-024-4111-9
[22] Sun, W. C. et al. Micropore filling fabrication of high resolution patterned PQDs with a pixel size less than 5 μm. Nanoscale 14, 5994-5998 (2022). doi: 10.1039/D2NR01115H
[23] Gao, Z. Y., Shi, J. B. & Yang, G. L. Quantum dots photoresist for direct photolithography patterning. Advanced Optical Materials 12, 2401106 (2024). doi: 10.1002/adom.202401106
[24] Gong, Z. Layer-scale and chip-scale transfer techniques for functional devices and systems: a review. Nanomaterials 11, 842 (2021). doi: 10.3390/nano11040842
[25] Li, J. W. et al. Low fluorescence crosstalk patterning of quantum dots based on laser drilling and micropore filling. Applied Physics Letters 123, 101101 (2023). doi: 10.1063/5.0161855
[26] Kryuchyn, А. A. et al. Prospects for the creation of the technology of maskless photolithography based on direct laser recording. Semiconductor Physics, Quantum Electronics & Optoelectronics 28, 93-101 (2025). doi: 10.15407/spqeo28.01.093
[27] Miyaji, G. et al. Stable fabrication of femtosecond-laser-induced periodic nanostructures on glass using real-time monitoring and active feedback control. Light: Advanced Manufacturing 6, 219-227 (2025). doi: 10.37188/lam.2025.003
[28] Wang, J. et al. Tailoring light on three-dimensional photonic chips: a platform for versatile OAM mode optical interconnects. Advanced Photonics 5, 036004 (2023). doi: 10.1117/1.AP.5.3.036004
[29] Guo, B. S. et al. Femtosecond laser micro/nano-manufacturing: theories, measurements, methods, and applications. Nanomanufacturing and Metrology 3, 26-67 (2020). doi: 10.1007/s41871-020-00056-5
[30] Liang, S. Y. et al. High‐resolution full‐color quantum dots patterning for display applications based on femtosecond laser‐induced forward transfer. Laser & Photonics Reviews 18, 2300388 (2024). doi: 10.1002/lpor.202300388
[31] Xie, Q. et al. High-aspect-ratio, high-quality microdrilling by electron density control using a femtosecond laser Bessel beam. Applied Physics A 122, 136 (2016). doi: 10.1007/s00339-016-9613-x
[32] Zhang, B., Yan, W. C. & Chen, F. Recent advances in femtosecond laser direct writing of three-dimensional periodic photonic structures in transparent materials. Advanced Photonics 7, 034002 (2025). doi: 10.1117/1.ap.7.3.034002
[33] Gu, Z. H. et al. Reducing the taper and heat-affected zone in nanosecond laser drilling of CFRP plate using backside sacrificial layer. Optics and Lasers in Engineering 185, 108735 (2025). doi: 10.1016/j.optlaseng.2024.108735
[34] Zhang, H. D. et al. Experimental research on micro-drilling of refractory material tungsten by multi-pulse femtosecond laser ablation. Optics & Laser Technology 168, 109962 (2024). doi: 10.1016/j.optlastec.2023.109962
[35] Liu, R. H. et al. Liquid-encapsulated quantum dot for enhanced UV and thermal stability of quantum dot color conversion films. Nano Research 17, 10127-10133 (2024). doi: 10.1007/s12274-024-6971-0
[36] Montazerian, H. et al. Wafer-scale laser-writing of nanoporous membranes with monodisperse pores for robust immunoisolation. ACS Nano 19, 41528-41539 (2025). doi: 10.1021/acsnano.5c09814
[37] Quinto-Su, P. A. et al. Mechanisms of pulsed laser microbeam release of SU-8 polymer “micropallets” for the collection and separation of adherent cells. Analytical Chemistry 80, 4675-4679 (2008). doi: 10.1021/ac800129a
[38] Butikova, J. et al. Exposure and post-bake thermal treatment in one step for SU8 photoresist. Nano-Structures & Nano-Objects 38, 101139 (2024). doi: 10.1016/j.nanoso.2024.101139
[39] Nowack, R. L. A tale of two beams: an elementary overview of Gaussian beams and Bessel beams. Studia Geophysica et Geodaetica 56, 355-372 (2012). doi: 10.1007/s11200-011-9054-0
[40] Li, R. et al. Stimuli-responsive actuator fabricated by dynamic asymmetric femtosecond bessel beam for in situ particle and cell manipulation. ACS Nano 14, 5233-5242 (2020). doi: 10.1021/acsnano.0c00381
[41] Allahyari, E. et al. Femtosecond laser surface irradiation of silicon in air: pulse repetition rate influence on crater features and surface texture. Optics & Laser Technology 126, 106073 (2020). doi: 10.1016/j.optlastec.2020.106073
[42] Indrišiūnas, S., Svirplys, E. & Gedvilas, M. Large-area fabrication of LIPSS for wetting control using multi-parallel femtosecond laser processing. Materials 15, 5534 (2022). doi: 10.3390/ma15165534
[43] Fang, R. R. et al. Superwicking functionality of femtosecond laser textured aluminum at high temperatures. Nanomaterials 11, 2964 (2021). doi: 10.3390/nano11112964
[44] Jahanbakhsh, A. et al. Review of microfluidic devices and imaging techniques for fluid flow study in porous geomaterials. Sensors 20, 4030 (2020). doi: 10.3390/s20144030
[45] Lin, H. Y. et al. Optical cross-talk reduction in a quantum-dot-based full-color micro-light-emitting-diode display by a lithographic-fabricated photoresist mold. Photonics Research 5, 411-416 (2017). doi: 10.1364/PRJ.5.000411
[46] Lin, C. C. et al. Fabricating quantum dot color conversion layers for micro-LED-based augmented reality displays. ACS Applied Optical Materials 2, 1303-1313 (2024). doi: 10.1021/acsaom.3c00104
[47] Li, Z. Y. et al. 3D patterning of perovskite quantum dots via direct in situ femtosecond laser writing. Nano Letters 25, 7410-7418 (2025). doi: 10.1021/acs.nanolett.5c00861
[48] Volpe, A. et al. A smart procedure for the femtosecond laser-based fabrication of a polymeric lab-on-a-chip for capturing tumor cell. Engineering 7, 1434-1440 (2021). doi: 10.1016/j.eng.2020.10.012
[49] Liang, S. Y. et al. Femtosecond laser ablation of quantum dot films toward physical unclonable multilevel fluorescent anticounterfeiting labels. ACS Applied Materials & Interfaces 15, 10986-10993 (2023). doi: 10.1021/acsami.2c16914
[50] Niu, P. P. et al. Femtosecond laser‐induced recrystallized nanotexturing for identity document security with physical unclonable functions. Advanced Science 12, 2411449 (2025). doi: 10.1002/advs.202411449