[1] Shafique, S. et al. High-performance photodetector using urchin-like hollow spheres of vanadium pentoxide network device. Sensors and Actuators A: Physical 296, 38-44 (2019). doi: 10.1016/j.sna.2019.07.003
[2] Sulaman, M. et al. High-performance self-powered NIR photodetectors enabled by PbSe quantum dot surface passivation with P3HT through bulk-heterojunction integration. Materials Today Chemistry 43, 102466 (2025). doi: 10.1016/j.mtchem.2024.102466
[3] Shafique, S. et al. Hierarchical synthesis of urchin-like V2O5 hollow spheres and its photodetection properties. Sensors and Actuators A: Physical 288, 107-116 (2019). doi: 10.1016/j.sna.2019.01.029
[4] Zhou, S. H. et al. A simple integratable silicon photodetector covering the short‐wave infrared and optical communication bands at 1.3 and 1.55 μm. Advanced Photonics Research 2, 2100091 (2021). doi: 10.1002/adpr.202100091
[5] Kang, S. S. et al. InAs on GaAs photodetectors using thin InAlAs graded buffers and their application to exceeding short-wave infrared imaging at 300 K. Scientific Reports 9, 12875 (2019). doi: 10.1038/s41598-019-49300-z
[6] Deka Boruah, B. Zinc oxide ultraviolet photodetectors: rapid progress from conventional to self-powered photodetectors. Nanoscale Advances 1, 2059-2085 (2019). doi: 10.1039/C9NA00130A
[7] Imran, A. et al. Growth of high mobility InN film on Ga‐polar GaN substrate by molecular beam epitaxy for optoelectronic device applications. Advanced Materials Interfaces 10, 2200105 (2023). doi: 10.1002/admi.202200105
[8] Usman, M. et al. Polarization-sensitive photodetection of anisotropic 2D black arsenic. The Journal of Physical Chemistry C 127, 9076-9082 (2023). doi: 10.1021/acs.jpcc.2c08630
[9] Adams, G. R. et al. Fabrication of rapid response self-powered photodetector using solution-processed triple cation lead-halide perovskite. Engineering Research Express 2, 015043 (2020). doi: 10.1088/2631-8695/ab7b38
[10] Mei, F. et al. Recent progress in perovskite-based photodetectors: the design of materials and structures. Advances in Physics: X 4, 1592709 (2019). doi: 10.1080/23746149.2019.1592709
[11] Shaikh, J. S. et al. Perovskite solar cells: in pursuit of efficiency and stability. Materials & Design 136, 54-80 (2017). doi: 10.1016/j.matdes.2017.09.037
[12] Sulaman, M. et al. Comprehensive review of organic/inorganic perovskite-based photodetectors: investigating their evolution and prospects in modern photonics. Photonics Research 13, 2096 (2025). doi: 10.1364/PRJ.545013
[13] Morozov, A. P. et al. Improvement of the perovskite photodiodes performance via advanced interface engineering with polymer dielectric. Light: Advanced Manufacturing 6, 161-175 (2025). doi: 10.37188/lam.2025.024
[14] Tao, K. W. et al. Self‐powered photodetector based on perovskite/NiOx heterostructure for sensitive visible light and X‐ray detection. Advanced Electronic Materials 9, 2201222 (2023). doi: 10.1002/aelm.202201222
[15] Zhang, H. et al. A high-performance self-powered photodetector based on a concentric annular α-FAPbI3/MAPbI3 single crystal lateral heterojunction with broadband detectivity. Journal of Materials Chemistry C 10, 11903-11913 (2022). doi: 10.1039/D2TC02686D
[16] Deng, Y. et al. High-performance flexible and self-powered perovskite photodetector enabled by interfacial strain engineering. Journal of Materials Chemistry C 11, 600-608 (2023). doi: 10.1039/D2TC03781E
[17] Afzal, A. M. et al. Highly efficient self-powered perovskite photodiode with an electron-blocking hole-transport NiOx layer. Scientific Reports 11, 169 (2021). doi: 10.1038/s41598-020-80640-3
[18] Liu, Y. Z. et al. High‐performance self‐powered photodetectors with space‐confined hybrid lead halide perovskite nanocrystals. Advanced Optical Materials 11, 2202215 (2023). doi: 10.1002/adom.202202215
[19] Zhou, H. et al. Self-powered all-inorganic perovskite microcrystal photodetectors with high detectivity. The Journal of Physical Chemistry Letters 9, 2043-2048 (2018). doi: 10.1021/acs.jpclett.8b00700
[20] Xiao, B. A. et al. Self-powered, low-dark-current, high-detectivity CsPbBr3 nanowire photodetectors with excellent weak-light detection ability. Journal of Materials Chemistry C 12, 19156-19162 (2024). doi: 10.1039/D4TC03419H
[21] Sulaman, M. et al. Synergetic enhancement of CsPbI3 nanorod-based high-performance photodetectors via PbSe quantum dot interface engineering. Chemical Science 15, 8514-8529 (2024). doi: 10.1039/D4SC00722K
[22] Afzal, A. et al. Synergistic optical and electrical modulation in PVP@rGO nanocomposites for advanced photodetector applications. Energy Technology 14, e202501586 (2026). doi: 10.1002/ente.202501586
[23] Sulaman, M. et al. Interlayer of PMMA doped with Au nanoparticles for high-performance tandem photodetectors: a solution to suppress dark current and maintain high photocurrent. ACS Applied Materials & Interfaces 12, 26153-26160 (2020). doi: 10.1021/acsami.0c04093
[24] Dou, L. T. et al. Solution-processed hybrid perovskite photodetectors with high detectivity. Nature Communications 5, 5404 (2014). doi: 10.1038/ncomms6404
[25] Li, Z. W. et al. MAPbI3 photodetectors with 4.7 MHz bandwidth and their application in organic optocouplers. The Journal of Physical Chemistry Letters 13, 815-821 (2022). doi: 10.1021/acs.jpclett.1c04137
[26] Tao, H. et al. Efficient photodiode-type photodetectors with perovskite thin films derived from an MAPbI3 single-crystal precursor. Journal of Materials Chemistry C 8, 6228-6235 (2020). doi: 10.1039/D0TC00734J
[27] Aggarwal, Y. et al. Highly efficient self-powered CH3NH3Pbl3 perovskite photodiode with double-sided poly(methyl methacrylate) passivation layers. Solar Energy Materials and Solar Cells 270, 112815 (2024). doi: 10.1016/j.solmat.2024.112815
[28] Park, J. et al. Self-powered CH3NH3PbI3 perovskite photodiode with a noise-suppressible passivation layer of poly(methyl methacrylate). Optics Express 31, 1202 (2023). doi: 10.1364/OE.479285
[29] Yu, L. X. et al. Solution-processed flexible MAPbI3 photodetectors with ZnO Schottky contacts. Optics Express 29, 7833 (2021). doi: 10.1364/OE.417494
[30] Saliba, M. et al. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency. Energy & Environmental Science 9, 1989-1997 (2016). doi: 10.1039/C5EE03874J
[31] Amratisha, K. et al. Graded multilayer triple cation perovskites for high speed and detectivity self-powered photodetector via scalable spray coating process. Scientific Reports 12, 11058 (2022). doi: 10.1038/s41598-022-14774-x
[32] Mahmoodpour, S. et al. Scalable and cost-effective fabrication of high-performance self-powered heterojunction UV-photodetectors using slot-die printing of triple-cation lead perovskite coupled with triboelectric nanogenerators. Journal of Physics: Energy 6, 015014 (2024). doi: 10.1088/2515-7655/ad1117
[33] Tong, S. C. et al. Fully-printed, flexible cesium-doped triple cation perovskite photodetector. Applied Materials Today 15, 389-397 (2019). doi: 10.1016/j.apmt.2019.03.001
[34] Sulaman, M. et al. Lead-free tin-based perovskites nanocrystals for high-performance self-driven bulk-heterojunction photodetectors. Materials Today Physics 27, 100829 (2022). doi: 10.1016/j.mtphys.2022.100829
[35] Li, C. L. et al. Enhanced photoresponse of self-powered perovskite photodetector based on ZnO nanoparticles decorated CsPbBr3 films. Solar Energy Materials and Solar Cells 172, 341-346 (2017). doi: 10.1016/j.solmat.2017.08.014
[36] Rao, Z. Y. et al. High sensitivity and rapid response ultraviolet photodetector of a tetragonal CsPbCl3 perovskite single crystal. Optical Materials Express 10, 1374 (2020). doi: 10.1364/OME.388429
[37] Li, W. G. et al. Enhanced on–off ratio photodetectors based on lead‐free Cs3Bi2I9 single crystal thin films. Advanced Functional Materials 30, 1909701 (2020). doi: 10.1002/adfm.201909701
[38] Wang, R. et al. Self-powered CsPbBr3 perovskite nanonet photodetector with a hollow vertical structure. The Journal of Physical Chemistry Letters 12, 7519-7525 (2021). doi: 10.1021/acs.jpclett.1c02177
[39] Liao, Y. H. et al. Self-filtering narrowband perovskite photodetector with ultra-narrowband and high spectral rejection ratio. APL Materials 10, 101109 (2022). doi: 10.1063/5.0120959
[40] Dai, Q. Y. et al. Towards high performance visible-blind narrowband near-infrared photodetectors with integrated perovskite light filter. Infrared Physics & Technology 108, 103358 (2020). doi: 10.1016/j.infrared.2020.103358
[41] Xue, J. et al. Narrowband perovskite photodetector-based image array for potential application in artificial vision. Nano Letters 18, 7628-7634 (2018). doi: 10.1021/acs.nanolett.8b03209
[42] Li, J. et al. Tricolor narrowband planar perovskite photodetectors based on FP microcavity structure. Optics Express 31, 30578 (2023). doi: 10.1364/OE.499090
[43] Imran, A. et al. Electric‐dipole gated two terminal phototransistor for charge‐coupled device. Advanced Optical Materials 11, 2300910 (2023). doi: 10.1002/adom.202300910
[44] Liu, P. H. et al. Perovskite photodetector-based laser absorption spectroscopy for gas detection. Optics Express 32, 21855 (2024). doi: 10.1364/OE.527380
[45] Bai, C. X. et al. Bidirectional‐sensitive dual‐narrowband self‐powered single perovskite photodetector for fast computational imaging. Advanced Functional Materials 35, 2419958 (2025). doi: 10.1002/adfm.202419958
[46] Feng, X. P. et al. Differential perovskite hemispherical photodetector for intelligent imaging and location tracking. Nature Communications 15, 577 (2024). doi: 10.1038/s41467-024-44857-4
[47] Lu, X. Y. et al. Recent progress on perovskite photodetectors for narrowband detection. Advanced Photonics Research 3, 2100335 (2022). doi: 10.1002/adpr.202100335
[48] Wang, H. & Kim, D. H. Perovskite-based photodetectors: materials and devices. Chemical Society Reviews 46, 5204-5236 (2017). doi: 10.1039/C6CS00896H
[49] Lin, Q. Q. et al. Filterless narrowband visible photodetectors. Nature Photonics 9, 687-694 (2015). doi: 10.1038/nphoton.2015.175
[50] Wang, J. et al. Self‐driven perovskite narrowband photodetectors with tunable spectral responses. Advanced Materials 33, 2005557 (2021). doi: 10.1002/adma.202005557
[51] Maculan, G. et al. CH3NH3PbCl3 single crystals: inverse temperature crystallization and visible-blind UV-photodetector. The Journal of Physical Chemistry Letters 6, 3781-3786 (2015). doi: 10.1021/acs.jpclett.5b01666
[52] Zheng, E. J. et al. Solution-processed visible-blind UV-a photodetectors based on CH3NH3PbCl3 perovskite thin films. Journal of Materials Chemistry C 5, 3796-3806 (2017). doi: 10.1039/C7TC00639J
[53] Tun, M. Z. et al. Improving morphology and optoelectronic properties of ultra-wide bandgap perovskite via Cs tuning for clear solar cell and UV detection applications. Scientific Reports 13, 2965 (2023). doi: 10.1038/s41598-023-29409-y
[54] Shin Thant, K. K. et al. Comprehensive review on slot‐die‐based perovskite photovoltaics: mechanisms, materials, methods, and marketability. Advanced Energy Materials 15, 2403088 (2025). doi: 10.1002/aenm.202403088
[55] Li, J. T. et al. Photoresponse properties and energy gap of CsPbBr3–CsPb2Br5 compound thin film prepared by one-step thermal evaporation method. Journal of Materials Science: Materials in Electronics 31, 4956-4962 (2020). doi: 10.1007/s10854-020-03062-x
[56] Bai, T. X. Y. et al. High stability and strong luminescence CsPbBr3–Cs4PbBr6 thin films for all-inorganic perovskite light-emitting diodes. RSC Advances 13, 24413-24422 (2023). doi: 10.1039/D3RA03947A
[57] Ullah, S. et al. All-inorganic CsPbBr3 perovskite: a promising choice for photovoltaics. Materials Advances 2, 646-683 (2021). doi: 10.1039/D0MA00866D
[58] Yang, B. W. et al. Strain effects on halide perovskite solar cells. Chemical Society Reviews 51, 7509-7530 (2022). doi: 10.1039/D2CS00278G
[59] Srathongsian, L. et al. Cs and Br tuning to achieve ultralow-hysteresis and high-performance indoor triple cation perovskite solar cell with low-cost carbon-based electrode. iScience 27, 109306 (2024). doi: 10.1016/j.isci.2024.109306
[60] Hidalgo, J. et al. Solvent and A-site cation control preferred crystallographic orientation in bromine-based perovskite thin films. Chemistry of Materials 35, 4181-4191 (2023). doi: 10.1021/acs.chemmater.3c00075
[61] Pan, Y. W. et al. Progress in the preparation and application of CsPbX3 perovskites. Materials Advances 3, 4053-4068 (2022). doi: 10.1039/D2MA00100D
[62] Rehman, W. et al. Photovoltaic mixed-cation lead mixed-halide perovskites: links between crystallinity, photo-stability and electronic properties. Energy & Environmental Science 10, 361-369 (2017). doi: 10.1039/C6EE03014A
[63] Li, C., Zhang, N. & Gao, P. Lessons learned: how to report XPS data incorrectly about lead-halide perovskites. Materials Chemistry Frontiers 7, 3797-3802 (2023). doi: 10.1039/D3QM00574G
[64] Sirtl, M. T. et al. 2D/3D hybrid Cs2AgBiBr6 double perovskite solar cells: improved energy level alignment for higher contact‐selectivity and large open circuit voltage. Advanced Energy Materials 12, 2103215 (2022). doi: 10.1002/aenm.202103215
[65] Zu, F. S. et al. Charge selective contacts to metal halide perovskites studied with photoelectron spectroscopy: X‐ray, ultraviolet, and visible light induced energy level realignment. Advanced Materials Interfaces 10, 2300413 (2023). doi: 10.1002/admi.202300413
[66] Hautzinger, M. P., Mihalyi-Koch, W. & Jin, S. A-site cation chemistry in halide perovskites. Chemistry of Materials 36, 10408-10420 (2024). doi: 10.1021/acs.chemmater.4c02043
[67] Sutanto, A. A. et al. 2D/3D perovskite engineering eliminates interfacial recombination losses in hybrid perovskite solar cells. Chem 7, 1903-1916 (2021). doi: 10.1016/j.chempr.2021.04.002
[68] Sheng, Y. H. et al. Highly efficient charge transfer between perovskite nanocrystals and G‐C3N4 nanosheets. Physica Status Solidi (B) 257, 2000198 (2020). doi: 10.1002/pssb.202000198
[69] Cui, P. et al. Planar p–n homojunction perovskite solar cells with efficiency exceeding 21.3%. Nature Energy 4, 150-159 (2019). doi: 10.1038/s41560-018-0324-8
[70] Yuan, M. et al. Tetramethylammonium hexafluorophosphate interface modification for high-efficiency perovskite solar cells. Journal of Physics D: Applied Physics 56, 145101 (2023). doi: 10.1088/1361-6463/acbf62
[71] Tan, Z. K. et al. Bright light-emitting diodes based on organometal halide perovskite. Nature Nanotechnology 9, 687-692 (2014). doi: 10.1038/nnano.2014.149
[72] Pang, T. Q. et al. Self-powered behavior based on the light-induced self-poling effect in perovskite-based transport layer-free photodetectors. Journal of Materials Chemistry C 7, 609-616 (2019). doi: 10.1039/C8TC05045G
[73] Zhang, M. et al. High-performance photodiode-type photodetectors based on polycrystalline formamidinium lead iodide perovskite thin films. Scientific Reports 8, 11157 (2018). doi: 10.1038/s41598-018-29147-6
[74] Guo, D. Y. et al. Fabrication of β-Ga2O3 thin films and solar-blind photodetectors by laser MBE technology. Optical Materials Express 4, 1067 (2014). doi: 10.1364/OME.4.001067
[75] Sutherland, B. R. et al. Sensitive, fast, and stable perovskite photodetectors exploiting interface engineering. ACS Photonics 2, 1117-1123 (2015). doi: 10.1021/acsphotonics.5b00164
[76] Xi, Y. Y. et al. Mitigating noise current in 2D perovskite single crystal photodetectors for imaging under black‐light condition. Advanced Functional Materials 34, 2407525 (2024). doi: 10.1002/adfm.202407525
[77] Sakhatskyi, K. et al. Stable perovskite single-crystal X-ray imaging detectors with single-photon sensitivity. Nature Photonics 17, 510-517 (2023). doi: 10.1038/s41566-023-01207-y
[78] Rombach, F. M., Haque, S. A. & Macdonald, T. J. Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells. Energy & Environmental Science 14, 5161-5190 (2021). doi: 10.1039/D1EE02095A
[79] Cao, C. T. et al. Bilayer interfacial engineering with PEAI/OAI for synergistic defect passivation in high-performance perovskite solar cells. Journal of Semiconductors 46, 052805 (2025). doi: 10.1088/1674-4926/25030046
[80] Wang, Z. P. et al. Surface passivation for efficient and stable perovskite solar cells in ambient air: the structural effect of amine molecules. Ceramics International 50, 7528-7537 (2024). doi: 10.1016/j.ceramint.2023.12.058
[81] Aslam, F. et al. Dual-interface passivation of wide-bandgap perovskite films for efficient four-terminal perovskite–organic tandem solar cells. The Journal of Physical Chemistry Letters 16, 5195-5201 (2025). doi: 10.1021/acs.jpclett.5c00756
[82] Tien, C. H., Lai, H. Y. & Chen, L. C. Methylammonium halide salt interfacial modification of perovskite quantum dots/triple-cation perovskites enable efficient solar cells. Scientific Reports 13, 5387 (2023). doi: 10.1038/s41598-023-32697-z
[83] Tien, C. H., Lai, W. S. & Chen, L. C. Buried interface passivation using organic ammonium salts for efficient inverted CsMAFA perovskite solar cell performance. ACS Omega 9, 23033-23039 (2024). doi: 10.1021/acsomega.4c02656
[84] Shafique, S. et al. Realising ultrafast perovskite photodetectors via 2D synergy for optical communication and sensitive light detection. Journal of Materials Chemistry A 13, 21615-21628 (2025). doi: 10.1039/D5TA02548F
[85] Shafique, S. et al. High-performance self-powered perovskite photodetectors enabled by Nb2CTx-passivated buried interface. Journal of Alloys and Compounds 1004, 175903 (2024). doi: 10.1016/j.jallcom.2024.175903
[86] Saleem, M. I. et al. Self-powered, all-solution processed, trilayer heterojunction perovskite-based photodetectors. Nanotechnology 31, 254001 (2020). doi: 10.1088/1361-6528/ab7de7
[87] Choodam, K. et al. Economical perovskite solar cell enabled by triple cost‐reduction strategies. Small Science 6, e202500451 (2026). doi: 10.1002/smsc.202500451
[88] Mahon, N. S. et al. Photoluminescence kinetics for monitoring photoinduced processes in perovskite solar cells. Solar Energy 195, 114-120 (2020). doi: 10.1016/j.solener.2019.11.050