[1] Zyla, G. & Farsari, M. Frontiers of laser-based 3d printing: A perspective on multi-photon lithography. Laser & Photonics Reviews 18, 2301312 (2024). doi: 10.1002/lpor.202301312
[2] Wang, H. et al. Two-photon polymerization lithography for optics and photonics: Fundamentals, materials, technologies, and applications. Advanced Functional Materials 33, 2214211 (2023). doi: 10.1002/adfm.202214211
[3] Sala, F. et al. Rapid prototyping of 3d biochips for cell motility studies using two-photon polymerization. Frontiers in Bioengineering and Biotechnology 9, 664094 (2021). doi: 10.3389/fbioe.2021.664094
[4] Barchiesi, E. et al. Complex mechanical properties of 3d micro-metric pantographic metamaterials fabricated by two-photon polymerization. Continuum Mechanics and Thermodynamics 36, 1755-1766 (2024). doi: 10.1007/s00161-024-01327-y
[5] Huang, Z. et al. Two-photon polymerization nano-lithography technology for fabrication of stimulus-responsive micro/nano-structures for biomedical applications. Nanotechnology Reviews 9, 1118-1136 (2020). doi: 10.1515/ntrev-2020-0073
[6] Ovsianikov, A. et al. Engineering 3d cell-culture matrices: Multiphoton processing technologies for biological and tissue engineering applications. Expert Review of Medical Devices 9, 613-633 (2012). doi: 10.1586/erd.12.48
[7] Zhou, X., Hou, Y. & Lin, J. A review on the processing accuracy of two-photon polymerization. AIP Advances 5, 030701 (2015). doi: 10.1063/1.4916886
[8] Harinarayana, V. & Shin, Y. C. Two-photon lithography for three-dimensional fabrication in micro/nanoscale regime: A comprehensive review. Optics & Laser Technology 142, 107180 (2021). doi: 10.1016/j.optlastec.2021.107180
[9] Skliutas, E. et al. X-photon laser direct write 3d nanolithography. Virtual and Physical Prototyping 18, e2228324 (2023). doi: 10.1080/17452759.2023.2228324
[10] LaFratta, C. N. et al. Multiphoton fabrication. Angewandte Chemie International Edition 46, 6238-6258 (2007). doi: 10.1002/anie.200603995
[11] O’Halloran, S. et al. Two-photon polymerization: Fundamentals, materials, and chemical modification strategies. Advanced Science 10, 2204072 (2023). doi: 10.1002/advs.202204072
[12] Skliutas, E. et al. Multiphoton 3d lithography. Nature Reviews Methods Primers 5, 15 (2025). doi: 10.1038/s43586-025-00386-y
[13] Skliutas, E. et al. Polymerization mechanisms initiated by spatio-temporally confined light. Nanophotonics 10, 1211-1242 (2021). doi: 10.1515/nanoph-2020-0551
[14] Ladika, D. et al. X-photon 3d lithography by fs-oscillators: wavelength-independent and photoinitiator-free. Light: Advanced Manufacturing 5, 567-579 (2024). doi: 10.37188/lam.2024.048
[15] Stavrou, M. et al. Direct measurement of two-photon absorption and refraction properties of SZ2080TM-based resists at 515 nm: insights into 3d printing. Nanophotonics 14, 2981-2992 (2025). doi: 10.1515/nanoph-2025-0066
[16] Messer, T. et al. A shoe-box-sized 3d laser nanoprinter based on two-step absorption. Light: Advanced Manufacturing 5, 269-276 (2024). doi: 10.37188/lam.2024.027
[17] Rietz, P. et al. Dynamic multi-focus 3d laser nanoprinting based on two-step absorption and computational holography. Laser & Photonics Reviews 19, 2500187 (2025). doi: 10.1002/lpor.202500187
[18] Vranic, A. et al. Novel photoinitiators for two-step absorption-based 3d laser nanoprinting: From molecular design to printing behavior. ChemPhotoChem 10, e202500337 (2026). doi: 10.1002/cptc.202500337
[19] Kiefer, P. et al. Sensitive photoresists for rapid multiphoton 3d laser micro- and nanoprinting. Advanced Optical Materials 8, 2000895 (2020). doi: 10.1002/adom.202000895
[20] Ladika, D. et al. High-and low-fluorescent photoinitiators for multiphoton lithography. ACS Applied Polymer Materials 7, 10108-10120 (2025). doi: 10.1021/acsapm.5c01802
[21] Mueller, P., Thiel, M. & Wegener, M. 3d direct laser writing using a 405 nm diode laser. Optics Letters 39, 6847-6850 (2014). doi: 10.1364/OL.39.006847
[22] Zyla, G. et al. Two-photon polymerization with diode lasers emitting ultrashort pulses with high repetition rate. Optics Letters 45, 4827 (2020). doi: 10.1364/ol.401738
[23] Surkamp, N. et al. Mode-locked diode laser-based two-photon polymerisation. Electronics Letters 56, 91-93 (2020). doi: 10.1049/el.2019.2385
[24] Wohlfeil, S. et al. Picosecond pulses with 40 w peak power from a passively mode-locked tapered quantum well laser. Electronics Letters 59, e12736 (2023). doi: 10.1049/ell2.12736
[25] Walpole, J. N. Semiconductor amplifiers and lasers with tapered gain regions. Optical and Quantum Electronics 28, 623-645 (1996). doi: 10.1007/BF00411298
[26] Wohlfeil, S. et al. Generation of picosecond pulses from tapered laser diodes with over 40 w peak power at wavelengths of 780 nm and 830 nm. In 2023 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC) (IEEE, Munich, 2023).
[27] Krakowski, M. et al. Stabilized high pulse energy passively mode-locked monolithic and external cavity tapered lasers for space applications. IEEE Journal of Selected Topics in Quantum Electronics 25, 1-15 (2019). doi: 10.1109/jstqe.2019.2927577
[28] Tan, B., Venkatakrishnan, K. & Makaronets, A. Effects of pulsewidth on two-photon polymerization. Designed Monomers and Polymers 16, 145-150 (2013). doi: 10.1080/15685551.2012.705502
[29] Saha, S. K. et al. Effect of proximity of features on the damage threshold during submicron additive manufacturing via two-photon polymerization. Journal of Micro and Nano-Manufacturing 5, 031002 (2017). doi: 10.1115/1.4036445
[30] Fischer, J. et al. Three-dimensional multi-photon direct laser writing with variable repetition rate. Optics Express 21, 26244 (2013). doi: 10.1364/oe.21.026244
[31] Malinauskas, M., Danilevičius, P. & Juodkazis, S. Three-dimensional micro-/nano-structuring via direct write polymerization with picosecond laser pulses. Optics Express 19, 5602 (2011). doi: 10.1364/OE.19.005602
[32] Rekštytė, S. et al. Nanoscale precision of 3d polymerization via polarization control. Advanced Optical Materials 4, 1209-1214 (2016). doi: 10.1002/adom.201600155
[33] Stavrou, M. et al. Nonlinearity matters in light–matter interaction: Multiphoton 3d lithography. Small Structures 7, e70430 (2026). doi: 10.1002/sstr.70430
[34] Drobecq, I. et al. Optimizing dimensional accuracy in two-photon polymerization: Influence of energy dose and proximity effects on sub-micrometric fiber structures. Additive Manufacturing 103, 104735 (2025). doi: 10.1016/j.addma.2025.104735
[35] Aderneuer, T., Fernández, O. & Ferrini, R. Two-photon grayscale lithography for free-form micro-optical arrays. Optics Express 29, 39511-39520 (2021). doi: 10.1364/OE.440251
[36] Zyla, G. et al. 3d micro-devices for enhancing the lateral resolution in optical microscopy. Light: Advanced Manufacturing 5, 204-217 (2024). doi: 10.37188/lam.2024.019
[37] Ovsianikov, A. et al. Ultra-low shrinkage hybrid photosensitive material for two-photon polymerization microfabrication. ACS Nano 2, 2257-2262 (2008). doi: 10.1021/nn800451w