[1] Efron, N. Contact Lens Practice-E-Book. 4th edn. (Elsevier, 2023).
[2] Rah, M. J. et al. Vision specific quality of life of pediatric contact lens wearers. Optometry and Vision Science 87, 560-566 (2010). doi: 10.1097/OPX.0b013e3181e6a1c8
[3] Ferrero, N. Leonardo da Vinci: of the Eye: an original new translation from codex D. American Journal of Ophthalmology 35, 507-521 (1952).
[4] Chia, H. N. & Wu, B. M. Recent advances in 3D printing of biomaterials. Journal of Biological Engineering 9, 4 (2015). doi: 10.1186/s13036-015-0001-4
[5] Li, Q. & Fang, F. Z. Advances and challenges of soft contact lens design for myopia control. Applied Optics 58, 1639-1656 (2019). doi: 10.1364/AO.58.001639
[6] Alam, F. et al. Prospects for additive manufacturing in contact lens devices. Advanced Engineering Materials 23, 2000941 (2021). doi: 10.1002/adem.202000941
[7] Musgrave, C. S. A. & Fang, F. Z. Contact lens materials: a materials science perspective. Materials 12, 261 (2019). doi: 10.3390/ma12020261
[8] Vincent, S. J. & Fadel, D. Optical considerations for scleral contact lenses: a review. Contact Lens and Anterior Eye 42, 598-613 (2019). doi: 10.1016/j.clae.2019.04.012
[9] Chen, Y. H., He, Y. C. & Yaung, J. F. Exploring pH-sensitive hydrogels using an ionic soft contact lens: an activity using common household materials. Journal of Chemical Education 91, 1671-1674 (2014). doi: 10.1021/ed400833b
[10] Cuklanz, H. D. & Hill, R. M. OXYGEN REQUIREMENTS OF CORNEAL CONTACT LENS SYSTEMS calculation of the reservoir exchange factor, f1. , based on measurements of sodium efflux. Optometry and Vision Science 46, 228-230 (1969). doi: 10.1097/00006324-196903000-00009
[11] Elsherif, M. et al. Contact lenses for color vision deficiency. Advanced Materials Technologies 6, 2000797 (2021). doi: 10.1002/admt.202000797
[12] Salih, A. E. et al. Silver nanoparticle-loaded contact lenses for blue-yellow color vision deficiency. Physica Status Solidi A 219, 2100294 (2022).
[13] Salih, A. E. et al. Gold nanocomposite contact lenses for color blindness management. ACS Nano 15, 4870-4880 (2021). doi: 10.1021/acsnano.0c09657
[14] Alam, F. et al. 3D printed intraocular lens for managing the color blindness. Additive Manufacturing Letters 5, 100129 (2023).
[15] Hisham, M. et al. 4D-printed photochromic contact lenses for ultraviolet monitoring and protection. Cell Reports Physical Science 5, 102244 (2024).
[16] Hisham, M. & Butt, H. Vat photopolymerization printing of functionalized hydrogels on commercial contact lenses. Scientific Reports 14, 13860 (2024). doi: 10.1038/s41598-024-63846-7
[17] Salih, A. E. & Butt, H. Multifunctional transition and temperature-responsive contact lenses. Light: Science & Applications 12, 271 (2023).
[18] Hisham, M. , Salih, A. E. & Butt, H. 3D printing of multimaterial contact lenses. ACS Biomaterials Science & Engineering 9, 4381-4391 (2023).
[19] Sakr, A. et al. Multifunctional and multimaterial contact lenses: tailored solutions for tunable color filtering and tear pH sensing. Virtual and Physical Prototyping 19, e2298411 (2024). doi: 10.1080/17452759.2023.2298411
[20] Alam, F. et al. 3D printed contact lenses for the management of color blindness. Additive Manufacturing 49, 102464 (2022).
[21] Nielsen, A. V. et al. 3D printed microfluidics. Annual Review of Analytical Chemistry 13, 45-65 (2020).
[22] Caño-García, M. et al. A 3D-printed device for polymer nanoimprint lithography. Review of Scientific Instruments 89, 025106 (2018). doi: 10.1063/1.5009648
[23] Arnold, C. et al. Surface quality of 3D-printed models as a function of various printing parameters. Materials 12, 1970 (2019). doi: 10.3390/ma12121970
[24] Wang, Y. & Li, W. S. A slicing algorithm to guarantee non-negative error of additive manufactured parts. The International Journal of Advanced Manufacturing Technology 101, 3157-3166 (2019). doi: 10.1007/s00170-018-3199-8
[25] Oropallo, W. & Piegl, L. A. Ten challenges in 3D printing. Engineering with Computers 32, 135-148 (2016). doi: 10.1007/s00366-015-0407-0
[26] Taufik, M. & Jain, P. K. Role of build orientation in layered manufacturing: a review. International Journal of Manufacturing Technology and Management 27, 47-73 (2013). doi: 10.1504/ijmtm.2013.058637
[27] Alam, F. et al. 3D printed contact lenses. ACS Biomaterials Science & Engineering 7, 794-803 (2021).
[28] Pandey, P. M., Reddy, N. V. & Dhande, S. G. Real time adaptive slicing for fused deposition modelling. International Journal of Machine Tools and Manufacture 43, 61-71 (2003). doi: 10.1016/S0890-6955(02)00164-5
[29] Vaidya, N. & Solgaard, O. 3D printed optics with nanometer scale surface roughness. Microsystems & Nanoengineering 4, 18 (2018).
[30] Zhang, Y. et al. Suppressing the step effect of 3D printing for constructing contact lenses. Advanced Materials 34, 2107249 (2022). doi: 10.1002/adma.202107249
[31] Zheludev, N. I. The road ahead for metamaterials. Science 328, 582-583 (2010). doi: 10.1126/science.1186756
[32] Bertoldi, K. et al. Flexible mechanical metamaterials. Nature Reviews Materials 2, 17066 (2017). doi: 10.1038/natrevmats.2017.66
[33] Lim, T. C. Analogies across auxetic models based on deformation mechanism. Physica Status Solidi (RRL)-Rapid Research Letters 11, 1600440 (2017). doi: 10.1002/pssr.201600440
[34] Andrew, J. J. et al. Mechanical and piezoresistive performance of additively manufactured carbon fiber/PA12 hybrid honeycombs. Thin-Walled Structures 201, 111950 (2024). doi: 10.1016/j.tws.2024.111950
[35] Moreddu, R., Vigolo, D. & Yetisen, A. K. Contact lens technology: from fundamentals to applications. Advanced Healthcare Materials 8, 1900368 (2019). doi: 10.1002/adhm.201900368
[36] Uyama, Y. et al. Comparison of different methods for contact angle measurement. Journal of Colloid and Interface Science 141, 275-279 (1991). doi: 10.1016/0021-9797(91)90322-Y
[37] Hisham, M. et al. Color perception simulation and experimental characterization of 3D printed multi-material contact lenses for color vision correction. Materials & Design 260, 115135 (2025). doi: 10.1016/j.matdes.2025.115135
[38] Efron, N. et al. Oxygen permeability and water content of silicone hydrogel contact lens materials. Optometry and Vision Science 84, E328-E337 (2007). doi: 10.1097/OPX.0b013e31804375ed
[39] Chwalik-Pilszyk, G. & Wiśniewska, A. Influence of selected ophthalmic fluids on the wettability and hydration of hydrogel and silicone hydrogel contact lenses—in vitro study. Materials 15, 930 (2022). doi: 10.3390/ma15030930
[40] Maldonado-Codina, C. & Morgan, P. B. In vitro water wettability of silicone hydrogel contact lenses determined using the sessile drop and captive bubble techniques. Journal of Biomedical Materials Research Part A 83A, 496-502 (2007).
[41] Ahmad, D. I. et al. Hydrophilic and hydrophobic materials and their applications. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 40, 2686-2725 (2018).
[42] Gulsen, D. & Chauhan, A. Effect of water content on transparency, swelling, lidocaine diffusion in p-HEMA gels. Journal of Membrane Science 269, 35-48 (2006). doi: 10.1016/j.memsci.2005.06.024
[43] Montani, G. & Martino, M. Tear film characteristics during wear of daily disposable contact lenses. Clinical Ophthalmology 14, 1521-1531 (2020). doi: 10.2147/OPTH.S242422
[44] Kim, E. , Saha, M. & Ehrmann, K. Mechanical properties of contact lens materials. Eye & Contact Lens: Science & Clinical Practice 44, S148-S156 (2018).
[45] Young, G. et al. The effect of soft contact lens care products on lens modulus. Contact Lens and Anterior Eye 33, 210-214 (2010). doi: 10.1016/j.clae.2010.06.002