[1] Xin, C. et al. A comprehensive review on additive manufacturing of glass: recent progress and future outlook. Materials & Design 227, 111736 (2023).
[2] Liu, G. et al. Additive manufacturing of structural materials. Materials Science and Engineering: R: Reports 145, 100596 (2021). doi: 10.1016/j.mser.2020.100596
[3] Camposeo, A. et al. Additive manufacturing: applications and directions in photonics and optoelectronics. Advanced Optical Materials 7, 1800419 (2019). doi: 10.1002/adom.201800419
[4] Liu, C. et al. Additive manufacturing of silica glass using laser stereolithography with a top-down approach and fast debinding. RSC Advances 8, 16344-16348 (2018). doi: 10.1039/C8RA02428F
[5] Chen, J. et al. Temperature control of quartz-glass melting areas in laser additive manufacturing. Micromachines 16, 29 (2025).
[6] Luo, J. et al. Additive manufacturing of glass for optical applications. Proceedings of SPIE 9738, Laser 3D Manufacturing III. San Francisco, California, United States: SPIE, 2016, 97380Y.
[7] Fateri, M. & Gebhardt, A. Selective laser melting of soda-lime glass powder. International Journal of Applied Ceramic Technology 12, 53-61 (2015). doi: 10.1111/ijac.12338
[8] Zaki, R. M. et al. Direct 3D-printing of phosphate glass by fused deposition modeling. Materials & Design 194, 108957 (2020).
[9] Nan, B. et al. Direct ink writing glass: a preliminary step for optical application. Materials 13, 1636 (2020). doi: 10.3390/ma13071636
[10] Klein, J. et al. Additive manufacturing of optically transparent glass. 3D Printing and Additive Manufacturing 2, 92-105 (2015).
[11] Florian, C. & Serra, P. Printing via laser-induced forward transfer and the future of digital manufacturing. Materials 16, 698 (2023). doi: 10.3390/ma16020698
[12] Delaporte, P. & Alloncle, A. P. Laser-induced forward transfer: A high resolution additive manufacturing technology. Optics & Laser Technology 78, 33-41 (2016).
[13] Bakhtiari, N., Azizian, S. & Jaleh, B. Hybrid superhydrophobic/hydrophilic patterns deposited on glass by laser-induced forward transfer method for efficient water harvesting. Journal of Colloid and Interface Science 625, 383-396 (2022). doi: 10.1016/j.jcis.2022.06.039
[14] Rapp, L. et al. Pulsed-laser printing of organic thin-film transistors. Applied Physics Letters 95, 171109 (2009). doi: 10.1063/1.3255011
[15] Morales, M. et al. Laser-induced forward transfer techniques and applications. in Advances in Laser Materials Processing (ed Lawrence, J. ) (Amsterdam: Elsevier, 2018), 339-379.
[16] Papavlu, A. P. & Lippert, T. LIFT using a dynamic release layer. in Laser Printing of Functional Materials: 3D Microfabrication, Electronics and Biomedicine (eds Piqué, A. & Serra, P. ) (Hoboken: Wiley-VCH Verlag GmbH & Co. KGaA, 2018).
[17] Turkoz, E. , Fardel, R. & Arnold, C. B. Advances in blister-actuated laser-induced forward transfer (BA-LIFT). in: Laser printing of functional materials: 3D Microfabrication, Electronics and Biomedicine (eds Piqué, A. & Serra, P. ) (Hoboken: Wiley-VCH Verlag GmbH & Co. KGaA, 2018).
[18] Komlenok, M. S. et al. Printing of crumpled CVD graphene via blister-based laser-induced forward transfer. Nanomaterials 10, 1103 (2020). doi: 10.3390/nano10061103
[19] Shaw-Stewart, J. et al. Laser-induced forward transfer using triazene polymer dynamic releaser layer. AIP Conference Proceedings 1278, 789-799 (2010).
[20] Richter, L. J. et al. Laser processing of silicon suboxide for the fabrication of multilevel fused silica diffractive phase elements. Journal of Laser Micro/Nanoengineering 13, 249-253 (2018).
[21] Ihlemann, J. & Weichenhain-Schriever, R. Pulsed laser-induced formation of silica nanogrids. Nanoscale Research Letters 9, 102 (2014). doi: 10.1186/1556-276X-9-102
[22] Bakhtiari, N. & Ihlemann, J. Fabrication of fluidic submicron channels by pulsed laser induced buckling of SiOx films on fused silica. Discover Nano 19, 46 (2024). doi: 10.1186/s11671-024-03987-w
[23] Ihlemann, J. & Weichenhain-Schriever, R. Patterned deposition of thin SiOx-films by laser induced forward transfer. Thin Solid Films 550, 521-524 (2014). doi: 10.1016/j.tsf.2013.10.128
[24] Baloglu, A. B. et al. Graphene mediated blister based laser induced forward transfer of thin and ultra thin ZrO2. Applied Physics A 130, 743 (2024). doi: 10.1007/s00339-024-07909-6
[25] Richter, L. J. & Ihlemann, J. Photoluminescence enhancement of silicon nanocrystals by excimer laser implanted gold nanoparticles. Applied Physics A 128, 764 (2022). doi: 10.1007/s00339-022-05906-1
[26] Turunen, J. & Wyrowski, F. Diffractive Optics for Industrial and Commercial Applications. (Berlin: Akademie Verlag, 1997).
[27] Klein-Wiele, J. H. et al. Fabrication of SiO2 phase gratings by UV laser patterning of silicon suboxide layers and subsequent oxidation. Journal of Laser Micro/Nanoengineering 1, 211-214 (2006). doi: 10.2961/jlmn.2006.03.0012
[28] Meinertz, J. et al. Fast fabrication of diffractive patterns on glass by excimer laser ablation. Optics & Laser Technology 152, 108148 (2022).
[29] Chmyrov, A. et al. Nanoscopy with more than 100, 000 ‘doughnuts’. Nature Methods 10, 737-740 (2013). doi: 10.1038/nmeth.2556
[30] Richter, L. J. et al. Excimer Laser Surface Patterning for Photoluminescence Enhancement of Silicon Nanocrystals. Photonics 10, 358 (2023). doi: 10.3390/photonics10040358
[31] Jahn, M. et al. Ablation of silicon suboxide thin layers. Applied Physics A 101, 533-538 (2010). doi: 10.1007/s00339-010-5892-9
[32] Shaw-Stewart, J. et al. Improved laser-induced forward transfer of organic semiconductor thin films by reducing the environmental pressure and controlling the substrate–substrate gap width. Applied Physics A 105, 713-722 (2011). doi: 10.1007/s00339-011-6583-x
[33] Serra, P. & Piqué, A. Laser-induced forward transfer: fundamentals and applications. Advanced Materials Technologies 4, 1800099 (2019). doi: 10.1002/admt.201800099
[34] Delaporte, P. et al. Applications of laser printing for organic electronics. Proceedings of SPIE 8607, Laser Applications in Microelectronic and Optoelectronic Manufacturing. San Francisco, California, United States: SPIE, 2013, 86070Z.
[35] Vass, C. et al. Experiments and numerical calculations for the interpretation of the backside wet etching of fused silica. Thin Solid Films 453-454, 121-126(2004).
[36] Ihlemann, J., Meinertz, J. & Danev, G. Excimer laser ablation of thick SiOx-films: etch rate measurements and simulation of the ablation threshold. Applied Physics Letters 101, 091901 (2012). doi: 10.1063/1.4748127
[37] Meshcheryakov, Y. P. et al. Role of thermal stresses on pulsed laser irradiation of thin films under conditions of microbump formation and nonvaporization forward transfer. Applied Physics A 113, 521-529 (2013). doi: 10.1007/s00339-013-7563-0
[38] Vartak, S. D. & Lawandy, N. M. Optically controlled imaging phase mask element. Optics Letters 21, 1198-1200 (1996). doi: 10.1364/OL.21.001198
[39] Ellis, J. D. et al. Frequency stabilized HeNe gas laser with 3.5 mW from a single mode. Precision Engineering 36, 203-209(2012).