[1] Lu, X. M. et al. Quantum-optimal detection of one-versus-two incoherent optical sources with arbitrary separation. npj Quantum Information 4, 64 (2018). doi: 10.1038/s41534-018-0114-y
[2] Semenov, A. P. et al. Manufacturing progress of production of high aspherical axis and off-axis astronomical and space optics for the last decade. Proceedings of SPIE 9683, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. Suzhou: SPIE, 2016.
[3] Atad-Ettedgui, E. , Owner-Petersen, M. & Goncharov, A. V. Atmospheric dispersion effects in ELTs and their compensation. Proceedings of SPIE 7018, Advanced Optical and Mechanical Technologies in Telescopes and Instrumentation. Marseille: SPIE, 2008, 70181D.
[4] Rao, C. H. et al. Astronomical adaptive optics: a review. PhotoniX. http://dx.doi.org/10.1186/s43074-024-00118-7 (2024).
[5] Cheng, J. Q. The Principles of Astronomical Telescope Design. (New York: Springer, 2009).
[6] Palacios-Navarro, G. et al. Compensation techniques aimed at mitigating vibrations in optical ground-based telescopes: a systematic review. Sensors 21, 3613 (2021). doi: 10.3390/s21113613
[7] Corbacho. V. V., Kuiper, H. & Gill, E. Review on thermal and mechanical challenges in the development of deployable space optics. Journal of Astronomical Telescopes, Instruments, and Systems 6, 010902 (2020). doi: 10.1117/1.jatis.6.1.010902
[8] Robichaud, J. L. et al. Proceedings of SPIE 8837, Material Technologies and Applications to Optics, Structures, Components, and Sub-Systems. San Diego: SPIE, 2013.
[9] Zhang, C. H. & Li, Z. X. A review of lightweight design for space mirror core structure: tradition and future. Machines 10, 1066 (2022). doi: 10.3390/machines10111066
[10] Edeson, R., Aglietti, G. S. & Tatnall, A. R. L. Conventional stable structures for space optics: the state of the art. Acta Astronautica 66, 13-32 (2010). doi: 10.1016/j.actaastro.2009.06.015
[11] Wang, D. F. et al. Adaptive spiral tool path generation for diamond turning of large aperture freeform optics. Materials 12, 810 (2019). doi: 10.3390/ma12050810
[12] Kim, D. et al. Advances in optical engineering for future telescopes. Opto-Electronic Advances 4, 210040 (2021).
[13] Graves, L. R. et al. Precision optics manufacturing and control for next-generation large telescopes. Nanomanufacturing and Metrology 2, 65-90 (2019). doi: 10.1007/s41871-019-00038-2
[14] Trumper, I. et al. Optics technology for large-aperture space telescopes: from fabrication to final acceptance tests. Advances in Optics and Photonics 10, 644-702 (2018). doi: 10.1364/AOP.10.000644
[15] Trimble, V. A generation of astronomical telescopes, their users, and publications. Scientometrics 84, 21-34 (2010). doi: 10.1007/s11192-009-0070-6
[16] Song, L. Q. et al. Study on optimization design and application of beryllium-mirror of space astronomical instruments. Proceedings of SPIE 6721, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes. Chengdu: SPIE, 2007, 672107.
[17] Garoli, D. et al. Mirrors for space telescopes: degradation issues. Applied Sciences 10, 7538 (2020). doi: 10.3390/app10217538
[18] Atkins, C. Technologies for advanced X-ray mirror fabrication. in Handbook of X-ray and Gamma-ray Astrophysics (eds Bambi, C. & Santangelo, A. ) (Singapore: Springer, 2024), 371-409.
[19] Döhring, T. et al. Four decades of ZERODUR mirror substrates for astronomy. Proceedings of SPIE 7281, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes. Chengdu: SPIE, 2009, 728103.
[20] Guerriero, E. et al. Heat treatment procedure of the aluminium 6061-T651 for the Ariel telescope mirrors. Proceedings of SPIE 12180, Space Telescopes and Instrumentation 2022: Optical, Infrared, and Millimeter Wave. Montréal: SPIE, 2022, 1218014.
[21] Pareschi, G. et al. Aluminum-based segmented mirrors for gamma-ray Cherenkov Telescopes via replication: status and perspectives. Proceedings of SPIE 11822, Optics for EUV, X-Ray, and Gamma-Ray Astronomy X. San Diego: SPIE, 2021, 1182203.
[22] Tan, S. N. et al. Design and fabrication of additively manufactured aluminum mirrors. Optical Engineering 59, 013103 (2020). doi: 10.1117/1.oe.59.1.013103
[23] Roulet, M. et al. Use of 3D printing in astronomical mirror. Proceedings of SPIE 10675, 3D Printed Optics and Additive Photonic Manufacturing II. Strasbourg: SPIE, 2018, 1067504.
[24] Zhai, Y. et al. Material selection and design of beryllium-aluminum alloy mirror assembly for large-diameter space infrared camera. Infrared and Laser Engineering 49, 288-294 (2020). doi: 10.3788/irla.36_2019-0390
[25] Zhang, X. J. et al. Challenges and strategies in high-accuracy manufacturing of the world’s largest SiC aspheric mirror. Light: Science & Applications 11, 310 (2022).
[26] Bourgenot, C. et al. Topology optimization of a single-point diamond-turning fixture for a deployable primary mirror telescope. Aerospace 11, 50 (2024). doi: 10.3390/aerospace11010050
[27] Utsunomiya, S. et al. The improved replication technique to fabricate ultra-light CFRP mirrors for space telescopes. Proceedings of SPIE 12180, Space Telescopes and Instrumentation 2022: Optical, Infrared, and Millimeter Wave. Montréal: SPIE, 2022, 121802D.
[28] Neugebauer, G. et al. The infrared astronomical satellite (IRAS) mission. Astrophysical Journal 278, L1-L6 (1984).
[29] Kessler, M. F. et al. The infrared space observatory (ISO) mission. Astronomy and Astrophysics 315, L27-L31 (1996). doi: 10.1016/s0273-1177(02)00557-4
[30] Werner, M. W. et al. The Spitzer Space Telescope mission. The Astrophysical Journal Supplement Series 154, 1-9 (2004). doi: 10.1016/j.asr.2005.04.012
[31] Feinberg, L. D. et al. James Webb Space Telescope optical stability lessons learned for future great observatories. Journal of Astronomical Telescopes, Instruments, and Systems 10, 011204 (2023).
[32] Navarro, R. , Cunningham, C. R. & Prieto, E. Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II. (Amsterdam: SPIE, 2012).
[33] Baiocchi, D. & Stahl, H. P. Enabling future space telescopes: mirror technology review and development roadmap. Astro2010: The Astronomy and Astrophysics Decadal Survey, Technology Development Papers 23 (2009).
[34] Fabian, A. C. X-ray source counts and the X-ray background from Uhuru. Monthly Notices of the Royal Astronomical Society 172, 149-157 (1975). doi: 10.1093/mnras/172.1.149
[35] Weisskopf, M. C. et al. An overview of the performance of the Chandra X-ray observatory. Experimental Astronomy 16, 1-68 (2003). doi: 10.1088/2514-3433/ab43dcch2
[36] Yin, H., Wang, S. & Zhao, Q. L. Investigation on the surface topography and surface/subsurface damage mechanisms of polycrystalline yttrium aluminum garnet ceramics in ultra-precision grinding. Materials Characterization 220, 114688 (2025). doi: 10.1016/j.matchar.2024.114688
[37] Gu, Y. et al. Surface modification mechanism of laser-assisted grinding process for high silicon aluminum alloy: a molecular dynamics study. Surfaces and Interfaces 56, 105753 (2025). doi: 10.1016/j.surfin.2025.105753
[38] Zhou, W. B. et al. Numerical investigation on the influence of cutting-edge radius and grinding wheel speed on chip formation in SiC grinding. Ceramics International 44, 21451-21460 (2018). doi: 10.1016/j.ceramint.2018.08.206
[39] Liu, Y. et al. Smoothed particle hydrodynamics simulation and experimental analysis of SiC ceramic grinding mechanism. Ceramics International 44, 12194-12203 (2018). doi: 10.1016/j.ceramint.2018.03.278
[40] Dai, C. W. et al. Analysis on ground surface in ultrasonic face grinding of silicon carbide (SiC) ceramic with minor vibration amplitude. Ceramics International 47, 21959-21968 (2021). doi: 10.1016/j.ceramint.2021.04.214
[41] Wang, W. et al. Ductile-brittle transition mechanisms of amorphous glass subjected to taper grinding experiment. Ceramics International 47, 1844-1854 (2021). doi: 10.1016/j.ceramint.2020.09.013
[42] Li, P. et al. Effects of local strain rate and temperature on the workpiece subsurface damage in grinding of optical glass. International Journal of Mechanical Sciences 182, 105737 (2020). doi: 10.1016/j.ijmecsci.2020.105737
[43] Yin, G. Q. et al. Modeling and evaluation in grinding of SiCp/Al composites with single diamond grain. International Journal of Mechanical Sciences 163, 105137 (2019). doi: 10.1016/j.ijmecsci.2019.105137
[44] Li, J. et al. A molecular dynamics investigation into the mechanisms of subsurface damage and material removal of monocrystalline copper subjected to nanoscale high speed grinding. Applied Surface Science 303, 331-343 (2014). doi: 10.1016/j.apsusc.2014.02.178
[45] Prinz, S. et al. Simulation of material removal behavior during grinding of fiber reinforced non-oxide ceramics (SiC/SiC). Procedia CIRP 118, 614-619 (2023). doi: 10.1016/j.procir.2023.06.105
[46] Salmassi, F. et al. Spin-on-glass smoothing of diamond turned optics for use in the extreme ultraviolet regime. Proceedings of SPIE 6883, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics. San Jose: SPIE, 2008, 68830F.
[47] Hammar, A. et al. Wide-field off-axis telescope for the Mesospheric Airglow/Aerosol Tomography Spectroscopy satellite. Applied Optics 58, 1393-1399 (2019). doi: 10.1364/AO.58.001393
[48] He, C. L. et al. An accurate 3D surface topography model for single-point diamond turning. International Journal of Machine Tools and Manufacture 134, 42-68 (2018). doi: 10.1016/j.ijmachtools.2018.07.004
[49] Liu, X. L. et al. Identification and compensation of main machining errors on surface form accuracy in ultra-precision diamond turning. International Journal of Machine Tools and Manufacture 105, 45-57 (2016). doi: 10.1016/j.ijmachtools.2016.03.001
[50] Nagayama, K. & Yan, J. W. Measurement and compensation of tool contour error using white light interferometry for ultra-precision diamond turning of freeform surfaces. International Journal of Automation Technology 14, 654-664 (2020). doi: 10.20965/ijat.2020.p0654
[51] Kim, H. -S. , Kim, E. -J. & Song, B. -S. Diamond turning of large off-axis aspheric mirrors using a fast tool servo with on-machine measurement. Journal of Materials Processing Technology 146, 349-355 (2004).
[52] Mansfield, D. Surface characterisation via optical diffraction. International Journal of Machine Tools and Manufacture 32, 11-17 (1992). doi: 10.1016/0890-6955(92)90054-K
[53] Hocheng, H. et al. Tool wear monitoring in single-point diamond turning using laser scattering from machined workpiece. Journal of Manufacturing Processes 31, 405-415 (2018). doi: 10.1016/j.jmapro.2017.12.007
[54] Tomov, M., Kuzinovski, M. & Cichosz, P. Development of mathematical models for surface roughness parameter prediction in turning depending on the process condition. International Journal of Mechanical Sciences 113, 120-132 (2016). doi: 10.1016/j.ijmecsci.2016.04.015
[55] Dumas, P. & McFee, C. Novel MRF fluid for ultra-low roughness optical surfaces. Proceedings of SPIE 9281, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. Harbin: SPIE, 2014, 928109.
[56] Inaba, T. et al. Low energy ion beam machining of ULE® substrates: evaluation of surface roughness. Microelectronic Engineering 86, 497-499 (2009). doi: 10.1016/j.mee.2008.11.044
[57] Bauer, J. Finishing of metal optics by ion beam technologies. Optical Engineering 58, 092612 (2019). doi: 10.1117/1.oe.58.9.092612
[58] Rauschenbach, B. Low-Energy Ion Irradiation of Materials: Fundamentals and Application. (Cham: Springer, 2022), 1-754.
[59] Risse, S. , Beier, M. & Hartung, J. Aspherical and freeform mirrors based on ultra-precise manufacturing for telescopes in the vis spectral range. Proceedings of SPIE 10562, International Conference on Space Optics—ICSO 2016. Biarritz: SPIE, 2017, 105625T.
[60] Comley, P. et al. Grinding metre scale mirror segments for the E-ELT ground based telescope. CIRP annals 60, 379-382 (2011). doi: 10.1016/j.cirp.2011.03.120
[61] Zhang, Z. Y. et al. High-performance grinding of a 2-m scale silicon carbide mirror blank for the space-based telescope. The International Journal of Advanced Manufacturing Technology 89, 463-473 (2017). doi: 10.1007/s00170-016-9107-1
[62] Yan, G. P., You, K. Y. & Fang, F. Z. Three-linear-axis grinding of small aperture aspheric surfaces. International Journal of Precision Engineering and Manufacturing-Green Technology 7, 997-1008 (2020). doi: 10.1007/s40684-019-00103-7
[63] Gu, P. et al. Investigation on plastic and brittle characteristic of magnesium aluminum spinel in ultra-precision grinding. Precision Engineering 94, 358-375 (2025). doi: 10.1016/j.precisioneng.2025.03.001
[64] Chen, Z. J., Zhan, S. D. & Zhao, Y. H. Electrochemical jet-assisted precision grinding of single-crystal SiC using soft abrasive wheel. International Journal of Mechanical Sciences 195, 106239 (2021). doi: 10.1016/j.ijmecsci.2020.106239
[65] Pratap, A., Patra, K. & Dyakonov, A. A. Experimental analysis of ductile-brittle transitions for parallel and intersecting micro-slot grinding in BK-7 glass. Ceramics International 45, 11013-11026 (2019). doi: 10.1016/j.ceramint.2019.02.185
[66] Gu, W. B., Yao, Z. Q. & Li, H. L. Investigation of grinding modes in horizontal surface grinding of optical glass BK7. Journal of Materials Processing Technology 211, 1629-1636 (2011). doi: 10.1016/j.jmatprotec.2011.05.006
[67] Yu, S. M. et al. Profile error compensation in ultra-precision grinding of aspherical-cylindrical lens array based on the real-time profile of wheel and normal residual error. Journal of Materials Processing Technology 312, 117849 (2023). doi: 10.1016/j.jmatprotec.2022.117849
[68] Gu, P. et al. An error compensation method for single point oblique axis grinding considering the grinding wheel wear. Journal of Manufacturing Processes 112, 32-44 (2024). doi: 10.1016/j.jmapro.2024.01.001
[69] Yu, S. M. et al. Simulation and experimental research of tool path planning on profile and surface generation of aspherical-cylindrical lens array by ultra-precision envelope grinding. Journal of Materials Processing Technology 307, 117690 (2022). doi: 10.1016/j.jmatprotec.2022.117690
[70] Nasr, G. & Davoodi, B. Prediction of profile error in aspheric grinding of spherical fused silica by ensemble learning regression methods. Precision Engineering 88, 65-80 (2024). doi: 10.1016/j.precisioneng.2024.01.026
[71] Lube, T. & Béhar-Lafenêtre, S. Strength behaviour of etched Zerodur®. Journal of the European Ceramic Society 37, 4407-4413 (2017).
[72] Yu, S. M. et al. Profile error compensation in precision grinding of ellipsoid optical surface. Chinese Journal of Aeronautics 34, 115-123 (2021). doi: 10.1016/j.cja.2020.08.042
[73] Goel, S. et al. Horizons of modern molecular dynamics simulation in digitalized solid freeform fabrication with advanced materials. Materials Today Chemistry 18, 100356 (2020). doi: 10.1016/j.mtchem.2020.100356
[74] Zhang, H. et al. Aluminum nitride surface modification mechanism by laser ultrasonic-assisted grinding. Tribology International 196, 109718 (2024). doi: 10.1016/j.triboint.2024.109718
[75] Chen, Z. et al. Improved grinding performance of SiC using an innovative bionic vein-like structured grinding wheel optimized by hydrodynamics. Journal of Manufacturing Processes 101, 195-207 (2023). doi: 10.1016/j.jmapro.2023.06.010
[76] Zhang, K. et al. Material removal mechanism of SiC ceramics by elliptic ultrasonic vibration-assisted grinding (EUVAG) using single grain. Ceramics International 49, 10041-10055 (2023). doi: 10.1016/j.ceramint.2022.11.184
[77] Lubliner, J. & Nelson, J. E. Stressed mirror polishing. 1: a technique for producing nonaxisymmetric mirrors. Applied Optics 19, 2332-2340 (1980).
[78] Pepi, J. W. Test and theoretical comparisons for bending and springing of the Keck segmented 10 m telescope. Optical Engineering 29, 1366-1372 (1990). doi: 10.1117/12.55739
[79] Jiang, Z. B. et al. Application progress of stressed mirror continuous polishing technology in the segments fabrication of telescope primary mirror. Proceedings of SPIE 11451, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV. Online: SPIE, 2020, 114510H.
[80] Navarro, R. & Burge, J. H. Stressed mirror annular polishing for scale-down TMT primary segments. Proceedings of SPIE 9912, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II. Edinburgh: SPIE, 2016, 99120A.
[81] Hall, H. J. , Gilmozzi, R. & Marshall, H. K. Force control technology of segment mirror exchange robot for Thirty Meter Telescope (TMT). Proceedings of SPIE 9906, Ground-based and Airborne Telescopes VI. Edinburgh: SPIE, 2016, 99062Z.
[82] Walker, D. et al. Technologies for producing segments for extremely large telescopes. Proceedings of SPIE 8126, Optical Manufacturing and Testing IX. San Diego: SPIE, 2011, 812604.
[83] Jiang, W. et al. Active edge control in the precessions polishing process for manufacturing large mirror segments. Proceedings of SPIE 9280, 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes. Harbin: SPIE, 2014, 928007.
[84] Fähnle, O. W. , Williamson, R. & Kim, D. W. Fast manufacturing of E-ELT mirror segments using CNC polishing. Proceedings of SPIE 8838, Optical Manufacturing and Testing X. San Diego: SPIE, 2013, San Diego, 88380K.
[85] Rupp, V. The development of optical surfaces during the grinding process. Applied Optics 4, 743-748 (1965). doi: 10.1364/ao.4.000743
[86] Jones, R. A. Optimization of computer controlled polishing. Applied Optics 16, 218-224 (1977). doi: 10.1364/AO.16.000218
[87] Jones, R. A. Computer controlled polisher demonstration. Applied Optics 19, 2072-2076 (1980). doi: 10.1364/AO.19.002072
[88] Martin, H. M. et al. Manufacture of 8.4 m segments for the GMT primary mirror. Proceedings of SPIE 11451, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV. Online: SPIE, 2020, 114514F.
[89] Martin, H. M. et al. Production of 8.4 m primary mirror segments for GMT. Proceedings of SPIE 12188, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V. Montréal: SPIE, 2022, 121880J.
[90] Kim, D. W. & Burge, J. H. Rigid conformal polishing tool using non-linear visco-elastic effect. Optics Express 18, 2242-2257 (2010). doi: 10.1364/OE.18.002242
[91] Navarro, R. , Cunningham, C. R. & Barto, A. A. Polishers around the globe: an overview on the market of large astronomical mirrors. Proceedings of SPIE 9151, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation. Montréal: SPIE, 2014, 915110.
[92] Zhou, D. Y. et al. Distinguishing the number of captured microspheres in dual-beam optical trap by measuring the back light signal. Proceedings of SPIE 10460, AOPC 2017: Optoelectronics and Micro/Nano-Optics. Beijing: SPIE, 2017, 104601B.
[93] Atad-Ettedgui, E. et al. Opto-mechanical design of SCUBA-2. Proceedings of SPIE 6273, Optomechanical Technologies for Astronomy. Orlando: SPIE, 2016, 62732H.
[94] Zhang, Y. D. et al. Current development of advanced optical technology in IOE, CAS. Proceedings of SPIE 6148, 2nd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes. Xi'an: SPIE, 2016, 614801.
[95] Pradhan, P. et al. Ultra-high precision NiP mirror fabrication using ion beam figuring for space applications. Optics Express 33, 17721-17734 (2025). doi: 10.1364/OE.549555
[96] Zheng, Y. et al. Investigation of sub-aperture polish techniques for manufacturing astronomical mirror. Proceedings of SPIE 7739, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation. San Diego: SPIE, 2010, 77390E.
[97] Deswal, N. & Kant, R. Machinability analysis during laser assisted turning of aluminium 3003 alloy. Lasers in Manufacturing and Materials Processing 9, 56-71 (2022). doi: 10.1007/s40516-022-00163-9
[98] Zhou, K. et al. A novel low-damage and low-abrasive wear processing method of Cf/SiC ceramic matrix composites: Laser-induced ablation-assisted grinding. Journal of Materials Processing Technology 302, 117503 (2022). doi: 10.1016/j.jmatprotec.2022.117503
[99] Li, W. et al. Key technologies for laser-assisted precision grinding of 3D C/C-SiC composites. Journal of the European Ceramic Society 43, 4322-4335 (2023). doi: 10.1016/j.jeurceramsoc.2023.03.048
[100] He, Y. et al. Surface formation in laser-assisted grinding high-strength alloys. International Journal of Machine Tools and Manufacture 186, 104002 (2023). doi: 10.1016/j.ijmachtools.2023.104002
[101] Ran, Y. C. et al. Ultrasonic assisted grinding force model considering anisotropy of SiCf/SiC composites. International Journal of Mechanical Sciences 250, 108311 (2023). doi: 10.1016/j.ijmecsci.2023.108311
[102] Li, H. B. et al. A grinding force model in two-dimensional ultrasonic-assisted grinding of silicon carbide. Journal of Materials Processing Technology 304, 117568 (2022). doi: 10.1016/j.jmatprotec.2022.117568
[103] Zhang, Z. K. et al. Investigation on the machined surface quality and removal mechanism of SiCf/SiC composites in ultrasonic-assisted grinding. The International Journal of Advanced Manufacturing Technology 123, 4427-4445 (2022). doi: 10.1007/s00170-022-10469-9
[104] Ding, K., Li, Q. L. & Zhang, C. D. Experimental studies on material removal mechanisms in ultrasonic assisted grinding of SiC ceramics with a defined grain distribution brazed grinding wheel. The International Journal of Advanced Manufacturing Technology 116, 3663-3676 (2021). doi: 10.1007/s00170-021-07612-3
[105] Zhao, H. S. et al. Experimental dynamic deformation analysis of active stressed lap. Applied Optics 55, 1190-1197 (2016). doi: 10.1364/AO.55.001190
[106] West, S. C. et al. Practical design and performance of the stressed-lap polishing tool. Applied Optics 33, 8094-8100 (1994). doi: 10.1364/AO.33.008094
[107] Cheng, R. M. et al. High-precision magnetorheological finishing based on robot by measuring and compensating trajectory error. Optics Express 30, 44741-44768 (2022). doi: 10.1364/OE.474959
[108] Zhang, X. J. et al. Development and application of MRF based on Robot Arm. EPJ Web of Conferences 215, 06001 (2019). doi: 10.1051/epjconf/201921506001
[109] Matthews, G. & Havey, K. Jr. Ten years of Chandra: reflecting back on engineering lessons learned during the design, fabrication, integration, test, and verification of NASA’s great x-ray observatory. Proceedings of SPIE 7738, Modeling, Systems Engineering, and Project Management for Astronomy IV. San Diego: SPIE, 2010, 77380Y.
[110] Citterio, O. & O'Dell, S. L. Development of grazing-incidence multilayer mirrors by direct Ni electroforming replication: a status report. Proceedings of SPIE 5900, Optics for EUV, X-Ray, and Gamma-Ray Astronomy II. San Diego: SPIE, 2005, 590008.
[111] Tanaka, Y., Inoue, H. & Holt, S. S. The X-ray astronomy satellite ASCA. Publications of the Astronomical Society of Japan 46, L37-L41 (1994). doi: 10.1007/bf01581810
[112] Takei, Y. et al. Development of a numerically controlled elastic emission machining system for fabricating mandrels of ellipsoidal focusing mirrors used in soft x-ray microscopy. Proceedings of SPIE 8848, Advances in X-Ray/EUV Optics and Components VIII. San Diego: SPIE, 2013, 88480C.
[113] Pareschi, G. et al. Nickel-replicated multilayer optics for soft and hard x-ray telescopes. Proceedings of SPIE 4012, X-Ray Optics, Instruments, and Missions III. Munich: SPIE, 2000, 284-293.
[114] Shibata, R. et al. X-ray telescope onboard Astro-E. II. Ground-based x-ray characterization. Applied Optics 40, 3762-3783 (2001).
[115] Zhang, W. W. et al. Development of lightweight x-ray mirrors for the Constellation-X mission. Proceedings of SPIE 6266, Space Telescopes and Instrumentation II: Ultraviolet to Gamma Ray. Orlando: SPIE, 2006, 62661V.
[116] Civitani, M. et al. Cold and Hot Slumped Glass Optics with interfacing ribs for high angular resolution x-ray telescopes. Proceedings of SPIE 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray. Edinburgh: SPIE, 2016, 99056U.
[117] Collon, M. J. et al. X-ray mirror development and production for the Athena telescope. Proceedings of SPIE 11852, International Conference on Space Optics—ICSO 2020. Online: SPIE, 2021, 118521Z.