[1] Kawata, S. et al. Finer features for functional microdevices. Nature 412, 697-698 (2001). doi: 10.1038/35089130
[2] Malinauskas, M. et al. Ultrafast laser processing of materials: from science to industry. Light: Science & Applications 5, e16133 (2016).
[3] Wang, H. et al. Two‐photon polymerization lithography for optics and photonics: fundamentals, materials, technologies, and applications. Advanced Functional Materials 33, 2214211 (2023). doi: 10.1002/adfm.202214211
[4] Blaicher, M. et al. Hybrid multi-chip assembly of optical communication engines by in situ 3D nano-lithography. Light: Science & Applications 9, 71 (2020).
[5] Luan, E. X. et al. Towards a high-density photonic tensor core enabled by intensity-modulated microrings and photonic wire bonding. Scientific Reports 13, 1260 (2023). doi: 10.1038/s41598-023-27724-y
[6] Xu, Y. L. et al. Hybrid external-cavity lasers (ECL) using photonic wire bonds as coupling elements. Scientific Reports 11, 16426 (2021). doi: 10.1038/s41598-021-95981-w
[7] Nesic, A. et al. Ultra-broadband polarisation beam splitters and rotators based on 3D-printed waveguides. Light: Advanced Manufacturing 4, 22 (2023). doi: 10.37188/lam.2023.022
[8] Lu, M. et al. Photonic integration using industry-ready photonic wire bonds and facet attached micro-lenses. IEEE Transactions on Components, Packaging and Manufacturing Technology 15, 1606-1613 (2025). doi: 10.1109/TCPMT.2025.3531206
[9] Dietrich, P. I. et al. In situ 3D nanoprinting of free-form coupling elements for hybrid photonic integration. Nature Photonics 12, 241-247 (2018). doi: 10.1038/s41566-018-0133-4
[10] Xu, Y. L. et al. 3D-printed facet-attached microlenses for advanced photonic system assembly. Light: Advanced Manufacturing 4, 3 (2023).
[11] Ma, Z. C. et al. Femtosecond-laser direct writing of metallic micro/nanostructures: from fabrication strategies to future applications. Small Methods 2, 1700413 (2018). doi: 10.1002/smtd.201700413
[12] Lay, C. L. et al. Two-photon-assisted polymerization and reduction: emerging formulations and applications. ACS Applied Materials & Interfaces 12, 10061-10079 (2020). doi: 10.1021/acsami.9b20911
[13] Yang, L. et al. Multi-material multi-photon 3D laser micro- and nanoprinting. Light: Advanced Manufacturing 2, 17 (2021). doi: 10.37188/lam.2021.017
[14] Tanaka, T., Ishikawa, A. & Kawata, S. Two-photon-induced reduction of metal ions for fabricating three-dimensional electrically conductive metallic microstructure. Applied Physics Letters 88, 081107 (2006). doi: 10.1063/1.2177636
[15] Blasco, E. et al. Fabrication of conductive 3D gold-containing microstructures via direct laser writing. Advanced Materials 28, 3592-3595 (2016). doi: 10.1002/adma.201506126
[16] LaFratta, C. N. et al. Direct laser patterning of conductive wires on three-dimensional polymeric microstructures. Chemistry of Materials 18, 2038-2042 (2006). doi: 10.1021/cm0525306
[17] Xu, B. B. et al. Flexible nanowiring of metal on nonplanar substrates by femtosecond-laser-induced electroless plating. Small 6, 1762-1766 (2010). doi: 10.1002/smll.201000511
[18] Saha, S. K., Au, B. & Oakdale, J. S. High-speed direct laser writing of silver nanostructures via two‐photon reduction. Advanced Engineering Materials 21, 1900583 (2019). doi: 10.1002/adem.201900583
[19] Hu, Q. et al. Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction. Scientific Reports 7, 17150 (2017). doi: 10.1038/s41598-017-17391-1
[20] Stellacci, F. et al. Laser and electron-beam induced growth of nanoparticles for 2D and 3D metal patterning. Advanced Materials 14, 194-198 (2002). doi: 10.1002/1521-4095(20020205)14:3<194::AID-ADMA194>3.0.CO;2-W
[21] Maruo, S. & Saeki, T. Femtosecond laser direct writing of metallic microstructures by photoreduction of silver nitrate in a polymer matrix. Optics Express 16, 1174-1179 (2008). doi: 10.1364/oe.16.001174
[22] Shukla, S. et al. Two-photon lithography of sub-wavelength metallic structures in a polymer matrix. Advanced Materials 22, 3695-3699 (2010).
[23] Ma, Z. C. et al. Femtosecond laser direct writing of plasmonic Ag/Pd alloy nanostructures enables flexible integration of robust SERS substrates. Advanced Materials Technologies 2, 1600270 (2017). doi: 10.1002/admt.201600270
[24] Yang, L. et al. Laser printed microelectronics. Nature Communications 14, 1103 (2023). doi: 10.1038/s41467-023-36722-7
[25] Vurth, L. et al. Two-photon induced fabrication of gold microstructures in polystyrene sulfonate thin films using a ruthenium(II) dye as photoinitiator. Applied Physics Letters 92, 171103 (2008). doi: 10.1063/1.2917810
[26] Lu, W. E. et al. Femtosecond direct laser writing of gold nanostructures by ionic liquid assisted multiphoton photoreduction. Optical Materials Express 3, 1660-1673 (2013). doi: 10.1364/OME.3.001660
[27] Nakamura, R. et al. Fabrication of gold microstructures using negative photoresists doped with gold ions through two-photon excitation. Physical Chemistry Chemical Physics 18, 17024-17028 (2016). doi: 10.1039/C6CP02577C
[28] Lee, M. R. et al. Direct metal writing and precise positioning of gold nanoparticles within microfluidic channels for SERS sensing of gaseous analytes. ACS Applied Materials & Interfaces 9, 39584-39593 (2017). doi: 10.1021/acsami.7b11649
[29] Zarzar, L. D. et al. Multiphoton lithography of nanocrystalline platinum and palladium for site-specific catalysis in 3D microenvironments. Journal of the American Chemical Society 134, 4007-4010 (2012). doi: 10.1021/ja211602t
[30] Ren, S. T. et al. Three distinct hydrogen sensing responses of palladium line patterns generated by femtosecond laser direct writing. Journal of Physics D: Applied Physics 45, 285303 (2012). doi: 10.1088/0022-3727/45/28/285303
[31] Zhang, B. et al. Investigation on 3-D-printing technologies for millimeter- wave and terahertz applications. Proceedings of the IEEE 105, 723-736 (2017). doi: 10.1109/JPROC.2016.2639520
[32] Standaert, A. et al. Three techniques for the fabrication of high precision, mm-sized metal components based on two-photon lithography, applied for manufacturing horn antennas for THz transceivers. Journal of Micromechanics and Microengineering 28, 035008 (2018). doi: 10.1088/1361-6439/aaa74b
[33] Xu, R. et al. A review of broadband low-cost and high-gain low-terahertz antennas for wireless communications applications. IEEE Access 8, 57615-57629 (2020). doi: 10.1109/ACCESS.2020.2981393
[34] Formanek, F. et al. Selective electroless plating to fabricate complex three-dimensional metallic micro/nanostructures. Applied Physics Letters 88, 083110 (2006). doi: 10.1063/1.2178261
[35] Vasilantonakis, N. et al. Three-dimensional metallic photonic crystals with optical bandgaps. Advanced Materials 24, 1101-1105 (2012). doi: 10.1002/adma.201104778
[36] Harter, T. et al. Generalized Kramers–Kronig receiver for coherent terahertz communications. Nature Photonics 14, 601-606 (2020). doi: 10.1038/s41566-020-0675-0
[37] Couture, N. et al. Single-pulse terahertz spectroscopy monitoring sub-millisecond time dynamics at a rate of 50 kHz. Nature Communications 14, 2595 (2023). doi: 10.1038/s41467-023-38354-3
[38] Fang, D. Y. et al. 320 GHz photonic-electronic analogue-to-digital converter (ADC) exploiting Kerr soliton microcombs. Light: Science & Applications 14, 241 (2025).
[39] de Gans, B. J., Duineveld, P. C. & Schubert, U. S. Inkjet printing of polymers: state of the art and future developments. Advanced Materials 16, 203-213 (2004). doi: 10.1002/adma.200300385
[40] Ohring, M. The Materials Science of Thin Films. (San Diego: Academic Press, 1992).
[41] Smith, D. L. Thin-Film Deposition: Principles and Practice. (New York: McGraw-Hill Professional, 1995).
[42] Keysight Technologies Inc. Sheet resistivity and sheet resistance measurement using an SMU. at https://www.keysight.com/us/en/assets/7018-05102/application-notes/5992-1329.pdf URL (2017).
[43] Emre Yarimbiyik, A. et al. Experimental and simulation studies of resistivity in nanoscale copper films. Microelectronics Reliability 49, 127-134 (2009). doi: 10.1016/j.microrel.2008.11.003
[44] Keysight Technologies Inc. De-embedding and embedding S-parameter networks using a vector network analyzer. at https://www.keysight.com/de/de/assets/7018-06806/application-notes/5980-2784.pdf URL (2024).
[45] Jones, R. D. et al. Microstrip and grounded CPW calibration kit comparison for on-wafer transistor characterization from 220 GHz to 325 GHz. IEEE BiCMOS and Compound Semiconductor Integrated Circuits and Technology Symposium (BCICTS). Monterey: IEEE, 124-127 (2023).
[46] Valenziano, L. et al. Advanced bond-wire interconnect solution for ultra-broadband applications covering DC to 210 GHz. IEEE Transactions on Components, Packaging and Manufacturing Technology 14, 1921-1930 (2024). doi: 10.1109/TCPMT.2024.3465608
[47] Li, C. H. & Chiu, T. Y. Low-loss single-band, dual-band, and broadband mm-wave and (sub-)THz interconnects for THz SoP heterogeneous system integration. IEEE Transactions on Terahertz Science and Technology 12, 130-143 (2022). doi: 10.1109/TTHZ.2021.3128596
[48] Monayakul, S. et al. Flip-chip interconnects for 250 GHz modules. IEEE Microwave and Wireless Components Letters 25, 358-360 (2015). doi: 10.1109/LMWC.2015.2424294
[49] Konstantinou, X. et al. Flexible chip-first millimeter-wave packaging using multiple dielectrics. IEEE Transactions on Components, Packaging and Manufacturing Technology 12, 682-691 (2022). doi: 10.1109/TCPMT.2022.3160626
[50] Craton, M. T. et al. Additive manufacturing of a W-band system-on-package. IEEE Transactions on Microwave Theory and Techniques 69, 4191-4198 (2021). doi: 10.1109/TMTT.2021.3076066
[51] Abdin, M. M. et al. W-band MMIC chip assembly using laser-enhanced direct print additive manufacturing. IEEE Transactions on Microwave Theory and Techniques 69, 5381-5392 (2021).
[52] Ihle, M. et al. Functional printing of MMIC-interconnects on LTCC packages for sub-THz applications. 2019 22nd European Microelectronics and Packaging Conference & Exhibition (EMPC). Pisa: IEEE, 1-4 (2019).
[53] Oakley, C. et al. Low-loss aerosol-jet printed wideband interconnects for embedded devices. IEEE Transactions on Components, Packaging and Manufacturing Technology 9, 2305-2313 (2019). doi: 10.1109/TCPMT.2019.2933792
[54] Fay, P. et al. Ultra-wide bandwidth inter-chip interconnects for heterogeneous millimeter-wave and THz circuits. Journal of Infrared, Millimeter, and Terahertz Waves 37, 874-880 (2016). doi: 10.1007/s10762-016-0278-5
[55] Wu, W. X. et al. A W-band GSG probe fabricated by metal additive manufacturing. IEEE Transactions on Instrumentation and Measurement 71, 8006610 (2022). doi: 10.1109/tim.2022.3214278
[56] Sakamaki, R. & Horibe, M. Long-term stability test on on-wafer measurement system in frequency ranges up to 325 GHz. IEEE Transactions on Instrumentation and Measurement 70, 8002309 (2021). doi: 10.1109/tim.2020.3047486
[57] Hebeler, J. et al. On-chip CMOS shorted bow-tie antenna enhanced by 3D printed parasitic resonator operating around 246 GHz. IEEE Access 13, 65955-65965 (2025). doi: 10.1109/ACCESS.2025.3559218
[58] Hebeler, J., Zwick, T. & Bhutani, A. Radiation behaviour of mm-wave on-wafer probes in H-band and the influence on antenna measurements. Electronics Letters 60, e13116 (2024).
[59] Reniers, A. C. F. et al. The influence of the probe connection on mm-wave antenna measurements. IEEE Transactions on Antennas and Propagation 63, 3819-3825 (2015). doi: 10.1109/TAP.2015.2452941
[60] Rahman, T. et al. Aerosol based direct-write micro-additive fabrication method for sub-mm 3D metal-dielectric structures. Journal of Micromechanics and Microengineering 25, 107002 (2015). doi: 10.1088/0960-1317/25/10/107002
[61] Stocchi, M. et al. Gain enhancement of BiCMOS on-chip sub-THz antennas by mean of meta-cells. Scientific Reports 12, 3946 (2022). doi: 10.1038/s41598-022-07902-0
[62] Kong, S. C. et al. Wide impedance-bandwidth and gain-bandwidth terahertz on-chip antenna with chip-integrated dielectric resonator. IEEE Transactions on Antennas and Propagation 69, 4269-4278 (2021). doi: 10.1109/TAP.2021.3060060
[63] Jenning, M. et al. On-chip integrated antennas for 200 GHz applications. 2015 IEEE International Conference on Ubiquitous Wireless Broadband (ICUWB). Montreal: IEEE, 1-5 (2015).
[64] Deng, T. W. et al. High-gain and high-efficiency sub-terahertz antenna-on-chip with microbumps for highly-integrated systems. IEEE Transactions on Antennas and Propagation 72, 4107-4115 (2024). doi: 10.1109/TAP.2024.3381444
[65] Tan, Z., Zhao, Y. & Ding, J. Q. High gain slot array antenna at 110 GHz based on computer numerical control. Micromachines 14, 1947 (2023). doi: 10.3390/mi14101947
[66] Syed, W. H. et al. Design, fabrication, and measurements of a 0.3 THz on-chip double slot antenna enhanced by artificial dielectrics. IEEE Transactions on Terahertz Science and Technology 5, 288-298 (2015).
[67] Alibakhshikenari, M. et al. High-isolation antenna array using SIW and realized with a graphene layer for sub-terahertz wireless applications. Scientific Reports 11, 10218 (2021). doi: 10.1038/s41598-021-87712-y
[68] Gadkari, P. Effect of annealing on copper thin films: the classical size effect and agglomeration. MSc thesis, University of Central Florida, Orlando (2005).
[69] Solouki, H., Jamaati, R. & Jamshidi Aval, H. High-temperature annealing behavior of cold-rolled electrolytic tough-pitch copper. Heliyon 10, e33276 (2024). doi: 10.1016/j.heliyon.2024.e33276
[70] Tabata, T. et al. Copper large-scale grain growth by UV nanosecond pulsed laser annealing. 2021 IEEE International Interconnect Technology Conference (IITC). Kyoto: IEEE, 1-3 (2021).
[71] Skorupa, W. , Schumann, T. & Rebohle, L. Millisecond thermal processing using flash lamps for the advancement of thin layers and functional coatings. 59th Annual Technical Conference Proceedings. Indianapolis: Society of Vacuum Coaters, 405-415 (2016).
[72] Harper, J. M. E. et al. Mechanisms for microstructure evolution in electroplated copper thin films near room temperature. Journal of Applied Physics 86, 2516-2525 (1999). doi: 10.1063/1.371086
[73] Jonušauskas, L. et al. Mesoscale laser 3D printing. Optics Express 27, 15205-15221 (2019). doi: 10.1364/OE.27.015205
[74] Huang, C. et al. High-speed mosaic imaging using scanner-synchronized stage position sampling. Journal of Biomedical Optics 27, 016502 (2022). doi: 10.1117/1.jbo.27.1.016502
[75] Maibohm, C. et al. Multi-beam two-photon polymerization for fast large area 3D periodic structure fabrication for bioapplications. Scientific Reports 10, 8740 (2020). doi: 10.1038/s41598-020-64955-9
[76] Yang, S. H. et al. Parallel two-photon lithography achieving uniform sub-200 nm features with thousands of individually controlled foci. Optics Express 31, 14174-14184 (2023). doi: 10.1364/OE.483524
[77] Gu, S. Y. et al. 3D nanolithography with metalens arrays and spatially adaptive illumination. Nature 648, 591-599 (2025).
[78] Hahn, V. et al. Rapid assembly of small materials building blocks (voxels) into large functional 3D metamaterials. Advanced Functional Materials 30, 1907795 (2020). doi: 10.1002/adfm.201907795
[79] Nanoscribe GmbH & Co. KG. Industrial upscaling of nano- and microfabrication – Combining rapid 2GL mastering with proven replication technologies. at https://www.nanoscribe.com/en/news-insights/whitepapers/whitepaper-industrial-upscaling-of-nano-and-microfabrication/ URL (2023).
[80] UpNano GmbH. Nano ONE 250 – Technical details. at https://www.upnano.com/wp-content/uploads/documents/UpNano_Data_Sheet_NanoOne_250.pdf URL (2024).
[81] Ge, Q. et al. Projection micro stereolithography based 3D printing and its applications. International Journal of Extreme Manufacturing 2, 022004 (2020). doi: 10.1088/2631-7990/ab8d9a
[82] Xu, G. F. & Skorobogatiy, M. 3D printing technique and its application in the fabrication of THz fibers and waveguides. Journal of Applied Physics 133, 210901 (2023).
[83] Behroodi, E., Latifi, H. & Najafi, F. A compact LED-based projection microstereolithography for producing 3D microstructures. Scientific Reports 9, 19692 (2019). doi: 10.1038/s41598-019-56044-3
[84] Sun, C. et al. Projection micro-stereolithography using digital micro-mirror dynamic mask. Sensors and Actuators A: Physical 121, 113-120 (2005). doi: 10.1016/j.sna.2004.12.011
[85] Sanchez Noriega, J. L. et al. Spatially and optically tailored 3D printing for highly miniaturized and integrated microfluidics. Nature Communications 12, 5509 (2021). doi: 10.1038/s41467-021-25788-w
[86] Vanderpoorten, O. et al. Scalable integration of nano-, and microfluidics with hybrid two-photon lithography. Microsystems & Nanoengineering 5, 40 (2019). doi: 10.1038/s41378-019-0080-3
[87] Lohse, D. Fundamental fluid dynamics challenges in inkjet printing. Annual Review of Fluid Mechanics 54, 349-382 (2022). doi: 10.1146/annurev-fluid-022321-114001
[88] Dassault Systèmes. CST studio suite 2021: cluster integration guide. at http://updates.cst.com/downloads/Cluster_Integration_Guide_2021.pdf URL (2020).