[1] Grinchuk, P. S. et al. Advanced reaction-bonded SiC ceramics for space mirror blanks. Journal of Manufacturing Processes 113, 275-290 (2024). doi: 10.1016/j.jmapro.2024.01.069
[2] Enya, K. et al. Microscopic surface structure of C/SiC composite mirrors for space cryogenic telescopes. Applied Optics 46, 2049-2056 (2007). doi: 10.1364/AO.46.002049
[3] Tian, F. X. et al. Gravity unloading of a very large spaceborne monolithic SiC mirror. Applied Optics 63, 838-845 (2024). doi: 10.1364/AO.509617
[4] Li, W. et al. Research progress of additive manufacturing SiC ceramic mirror. Bulletin of the Chinese Ceramic Society 43, 2661-2671 (2024).
[5] Li, W. et al. Properties regulation of SiC ceramics prepared via stereolithography combined with reactive melt infiltration techniques. Ceramics International 47, 33997-34004 (2021). doi: 10.1016/j.ceramint.2021.08.307
[6] Stahl, H. P. JWST primary mirror technology development lessons learned. Proceedings of SPIE 7796, An Optical Believe It or Not: Key Lessons Learned II. San Diego, California, United States: SPIE, 2010, 779604.
[7] Kendrick, S. E. et al. Lightweighted beryllium cryogenic mirrors for both monolithic and segmented space telescopes. Proceedings of SPIE 4850, IR Space Telescopes and Instruments. Waikoloa, Hawai'i, United States: SPIE, 2002.
[8] Choyke, W. J., Farich, R. F. & Hoffman, R. A. SiC, a new material for mirrors 1: high power lasers; 2: VUV applications. Applied Optics 15, 2006-2007 (1976). doi: 10.1364/ao.15.002006
[9] Kendrick, S. E. et al. From Herschel to Gaia: 3-meter class SiC space optics. Proceedings of SPIE 4850, IR Space Telescopes and Instruments. Waikoloa, Hawai'i, United States: SPIE, 2011, 81260V.
[10] Robichaud, J. et al. Silicon carbide optics for space and ground based astronomical telescopes. Proceedings of SPIE 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II. Amsterdam, Netherlands: SPIE, 2012, 845002.
[11] Zhang, G. et al. Gelcasting process of 1.5m SiC ceramic green body. Optics and Precision Engineering 21, 2989-2993(2013).
[12] Zeng, C. Q. et al. Lightweight airborne TPMS-filled reflective mirror design for low thermal deformation. Composite Structures 327, 117665 (2024). doi: 10.1016/j.compstruct.2023.117665
[13] Chen, X. et al. Stress-concentration reduction and mechanical performance improvement of Cf/SiC composite-to-superalloy joints by using topology optimization. Materials & Design 216, 110537 (2022). doi: 10.1016/j.matdes.2022.110537
[14] Xu, Y. J. et al. A multi-layer integrated thermal protection system with C/SiC composite and Ti alloy lattice sandwich. Composite Structures 230, 111507 (2019). doi: 10.1016/j.compstruct.2019.111507
[15] Zhang, Y. B. et al. Additive manufacturing and characterization of microstructure evolution of Inconel 718 superalloy produced by vat photopolymerization. Additive Manufacturing 61, 103367 (2023). doi: 10.1016/j.addma.2022.103367
[16] Zhang, Y. B. et al. Digital light processing 3D printing of AlSi10Mg powder modified by surface coating. Additive Manufacturing 39, 101897 (2021). doi: 10.1016/j.addma.2021.101897
[17] Yang, D. et al. Controllable reduction of absorbance and two-step reaction for 3D-printed SiC ceramics with micron-level periodic structure. Chemical Engineering Journal 477, 146915 (2023). doi: 10.1016/j.cej.2023.146915
[18] Lu, D. C. et al. Effect of holding time on SiC whiskers growth of SiCw/SiC composites based on SLS technology and their mechanical properties. Ceramics International 48, 33019-33027 (2022). doi: 10.1016/j.ceramint.2022.07.234
[19] Lv, X. Y. et al. Binder jetting additive manufacturing of hierarchical structural SiCw/SiC composites. Additive Manufacturing 93, 104434 (2024). doi: 10.1016/j.addma.2024.104434
[20] Niu, F. R. et al. Fused deposition modeling of Si3N4 ceramics: a cost-effective 3D-printing route for dense and high performance non-oxide ceramic materials. Journal of the European Ceramic Society 42, 7369-7376 (2022). doi: 10.1016/j.jeurceramsoc.2022.08.041
[21] Li, W. et al. Vat photopolymerization of large-aperture high performance SiC mirror through multiphase carbon infiltration modification. Additive Manufacturing 85, 104160 (2024). doi: 10.1016/j.addma.2024.104160
[22] She, Y. L. et al. Preparation of high-density green body based on binder jetting 3D printing using spheroidized SiC powder. Ceramics International 50, 32412-32419 (2024). doi: 10.1016/j.ceramint.2024.06.049
[23] Feng, K. H. et al. Preparation of low residual silicon content Si-SiC ceramics by binder jetting additive manufacturing and liquid silicon infiltration. Journal of the European Ceramic Society 43, 5446-5457 (2023). doi: 10.1016/j.jeurceramsoc.2023.05.038
[24] Cheny, T., Colin, C. & Verquin, B. Experimental evaluation of binder infiltration depth and axial overlap to control properties of green parts produced by Binder Jetting. Additive Manufacturing 87, 104231 (2024). doi: 10.1016/j.addma.2024.104231
[25] Li, W. et al. Microstructure evolution and performance improvement of silicon carbide ceramics via impregnation method. Materials 15, 1717 (2022). doi: 10.3390/ma15051717
[26] Xue, R. et al. Mechanism of retaining graphite phase in the graphite/SiC composite by condense layer with fine SiC grain reaction formed via nano carbon black. Ceramics International 49, 38653-38661 (2023). doi: 10.1016/j.ceramint.2023.09.198
[27] Cramer, C. L. et al. Properties of SiC-Si made via binder jet 3D printing of SiC powder, carbon addition, and silicon melt infiltration. Journal of the American Ceramic Society 104, 5467-5478 (2021). doi: 10.1111/jace.17933
[28] Gu, X. S. et al. Effect of particle grading on properties of silicon carbide ceramics by binder jetting printing. Journal of Inorganic Materials 38, 1373-1378 (2023). doi: 10.15541/jim20230216
[29] Fu, Z. et al. Three-dimensional printing of SiSiC lattice truss structures. Materials Science and Engineering: A 560, 851-856 (2013). doi: 10.1016/j.msea.2012.09.107
[30] Lv, X. Y. et al. Fabrication of SiC whisker-reinforced SiC ceramic matrix composites based on 3D printing and chemical vapor infiltration technology. Journal of the European Ceramic Society 39, 3380-3386 (2019). doi: 10.1016/j.jeurceramsoc.2019.04.043
[31] Polozov, I. et al. Fabrication of silicon carbide fiber-reinforced silicon carbide matrix composites using binder jetting additive manufacturing from irregularly-shaped and spherical powders. Materials 13, 1766 (2020). doi: 10.3390/ma13071766
[32] Chaugule, P. S. et al. Reliability comparisons between additively manufactured and conventional SiC–Si ceramic composites. Journal of the American Ceramic Society 107, 3117-3133 (2024). doi: 10.1111/jace.19682
[33] Baux, A. et al. Synthesis and properties of macroporous SiC ceramics synthesized by 3D printing and chemical vapor infiltration/deposition. Journal of the European Ceramic Society 40, 2834-2854 (2020). doi: 10.1016/j.jeurceramsoc.2020.03.001
[34] Hu, S. D. et al. Microstructure and mechanical properties of SiCw /SiC ceramics prepared by binder jetting additive manufacturing combined with liquid silicon infiltration. Journal of the Chinese Ceramic Society 51, 3159-3168 (2023).
[35] Wang, Y. F. et al. Silicon carbide ceramics formed by binder jetting: a study focusing on the printing layer thickness and the PIP densification process. Ceramics International 50, 30894-30905 (2024). doi: 10.1016/j.ceramint.2024.05.395
[36] Luo, X. G. High-precision fabrication of 4m SiC aspheric mirror. Light: Science & Applications 12, 4(2023).
[37] Zhang, X. J. et al. Challenges and strategies in high-accuracy manufacturing of the world’s largest SiC aspheric mirror. Light: Science & Applications 11, 310(2022).
[38] Hu, H. X. et al. Investigating a corrective online measurement method for the tool influence function in millimetre spot-sized ion beam figuring. Light: Advanced Manufacturing 6, 50 (2025). doi: 10.37188/lam.2025.050
[39] Zhang, X. et al. Study on surface roughness of monocrystalline silicon carbide based on PSD evaluation and pseudo-random tool path. Infrared and Laser Engineering 52, 20220838 (2023). doi: 10.3788/IRLA20220838