[1] Masteghin, M. G. et al. Benchmarking of X-ray fluorescence microscopy with ion beam implanted samples showing detection sensitivity of hundreds of atoms. Small Methods 8, 2301610 (2024). doi: 10.1002/smtd.202301610
[2] Wyant, J. C. Computerized interferometric surface measurements[Invited]. Applied Optics 52, 1-8 (2013).
[3] Dwivedi, P., Pereira, S. F. & Urbach, H. P. Ptychography as a wavefront sensor for high-numerical aperture extreme ultraviolet lithography: analysis and limitations. Optical Engineering 58, 043102 (2019). doi: 10.1117/1.oe.58.4.043102
[4] Yamada, J. et al. Extreme focusing of hard X-ray freeelectron laser pulses enables 7 nm focus width and 1022 W cm−2 intensity. Nature Photonics 18, 685-690 (2024). doi: 10.1038/s41566-024-01411-4
[5] Liu, W. J. et al. Short focal length Kirkpatrick-Baez mirrors for a hard x-ray nanoprobe. Review of Scientific Instruments 76, 113701 (2005). doi: 10.1063/1.2125730
[6] Kirkpatrick, P. & Baez, A. V. Formation of optical images by X-rays. Journal of the Optical Society of America 38, 766-774 (1948). doi: 10.1364/JOSA.38.000766
[7] Peverini, L. et al. Ion beam profiling of aspherical X-ray mirrors. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 616, 115-118 (2010).
[8] Ziegler, E. et al. Evolution of surface roughness in silicon X-ray mirrors exposed to a low-energy ion beam. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 616, 188-192 (2010). doi: 10.1016/j.nima.2009.12.062
[9] Wang, R. et al. Evolution of ultrasmooth si surface under scanning ar ion beam etching with contamination. Applied Surface Science 727, 165968 (2026). doi: 10.1016/j.apsusc.2026.165968
[10] Wang, T. Y. et al. RISE: Robust iterative surface extension for sub-nanometer X-ray mirror fabrication. Optics Express 29, 15114-15132 (2021). doi: 10.1364/OE.419490
[11] Mizoue, Y., Sencer, B. & Beaucamp, A. Identification and optimization of CNC dynamics in time-dependent machining processes and its validation to fluid jet polishing. International Journal of Machine Tools and Manufacture 159, 103648 (2020). doi: 10.1016/j.ijmachtools.2020.103648
[12] Ke, X. L. et al. E-PVT: Enhanced position-velocitytime scheduler for computer-controlled optical finishing with comprehensive considerations of dynamics constraints, continuity and efficiency. Optics Express 32, 15507-15526 (2024). doi: 10.1364/OE.514654
[13] Wang, T. Y. et al. Hybrid height and slope figuring method for grazing-incidence reflective optics. Journal of Synchrotron Radiation 30, 65-75 (2023). doi: 10.1107/S160057752201058X
[14] Mimura, H. et al. Relative angle determinable stitching interferometry for hard x-ray reflective optics. Review of Scientific Instruments 76, 045102 (2005). doi: 10.1063/1.1868472
[15] Vivo, A. et al. Stitching methods at the european synchrotron radiation facility (ESRF). Review of Scientific Instruments 87, 051908 (2016). doi: 10.1063/1.4950745
[16] Huang, L. et al. Stitching interferometry for synchrotron mirror metrology at national synchrotron light source II (NSLS-II). Optics and Lasers in Engineering 124, 105795 (2020). doi: 10.1016/j.optlaseng.2019.105795
[17] Wu, Q. Y. et al. Mixed stitching interferometry with correction from one-dimensional profile measurements for high-precision x-ray mirrors. Optics Express 31, 16330-16347 (2023). doi: 10.1364/OE.486829
[18] Huang, L. et al. Measurement uncertainty of highly asymmetrically curved elliptical mirrors using multipitch slope stitching technique. Frontiers in Physics 10, 880772 (2022). doi: 10.3389/fphy.2022.880772
[19] Huang, L. et al. Multi-pitch nano-accuracy surface profiler for strongly curved X-ray mirror metrology. Optics and Lasers in Engineering 162, 107428 (2023). doi: 10.1016/j.optlaseng.2022.107428
[20] Qian, S. N. & Idir, M. Innovative nanoaccuracy surface profiler for sub-50 nrad rms mirror test. Proceedings of SPIE 9687, 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Subnanometer Accuracy Measurement for Synchrotron Optics and X-Ray Optics. Suzhou: SPIE, 2016, 96870D.
[21] Wang, H. C., Moriconi, S. & Sawhney, K. Nanoprecision metrology of X-ray mirrors with laser speckle angular measurement. Light: Science & Applications 10, 195 (2021). doi: 10.1038/s41377-021-00632-4
[22] Wu, M. et al. Enhanced-spatial-resolution optical surface profiler based on focusing deflectometry. Optics Express 30, 45918-45929 (2022). doi: 10.1364/OE.462784
[23] Wang, T. Y. et al. Ion beam figuring system for synchrotron X-ray mirrors achieving sub-0.2-μrad and sub-0.5-nm root mean square. Nanomanufacturing and Metrology 6, 20 (2023). doi: 10.1007/s41871-023-00200-x
[24] Chubar, O. et al. Development of partiallycoherent wavefront propagation simulation methods for 3rd and 4th generation synchrotron radiation sources. Proceedings of SPIE 8141, Advances in Computational Methods for X-Ray Optics II. San Diego: SPIE, 2011, 814107.
[25] Chubar, O. et al. Applications of “synchrotron radiation workshop” code. Synchrotron Radiation News 36, 15-22 (2023). doi: 10.1080/08940886.2023.2274739
[26] Li, R. Z. & Chubar, O. Efficient coherent mode decomposition for physical optics simulations of beamlines and experiments. Journal of Physics: Conference Series 2380, 012090(Dec. 2022).
[27] Li, R. Z. & Chubar, O. Memory and cpu efficient coherent mode decomposition of partially coherent synchrotron radiation with subtraction of common quadratic phase terms. Optics Express 30, 5896-5915 (2022). doi: 10.1364/OE.452247
[28] Yan, H. F. et al. Multimodal hard x-ray imaging with resolution approaching 10 nm for studies in material science. Nano Futures 2, 011001 (2018). doi: 10.1088/2399-1984/aab25d
[29] Nazaretski, E. et al. Performance and characterization of the prototype nm-scale spatial resolution scanning multilayer laue lenses microscope. Review of Scientific Instruments 84, 033701 (2013). doi: 10.1063/1.4774387
[30] Huang, X. J. et al. Achieving hard X-ray nanofocusing using a wedged multilayer laue lens. Optics Express 23, 12496-12507 (2015). doi: 10.1364/OE.23.012496
[31] Nazaretski, E. et al. A new kirkpatrick-baez-based scanning microscope for the submicron resolution Xray spectroscopy (SRX) beamline at NSLS-II. Journal of Synchortron Radiation 29, 1284-1291 (2022). doi: 10.1107/S1600577522007056
[32] Xu, W. H. et al. A versatile high-speed x-ray microscope for sub-10 nm imaging. Review of Scientific Instruments 95, 113705 (2024). doi: 10.1063/5.0225904
[33] Huang, L. et al. Manufacturability-based optical design optimization for advanced Kirkpatrick-Baez Xray focusing mirrors. Optics Express 32, 25755-25771 (2024). doi: 10.1364/OE.529965
[34] Macrander, A. T. & Huang, X. R. Synchrotron Xray optics. Annual Review of Materials Research 47, 135-152 (2017).
[35] Huang, L. et al. Framework for X-ray mirror surface shape fitting. Journal of Synchrotron Radiation 33, 278-288 (2026). doi: 10.1107/S1600577525011282
[36] Wang, T. Y. et al. Development of a position-velocity-time-modulated two-dimensional ion beam figuring system for synchrotron x-ray mirror fabrication. Applied Optics 59, 3306-3314 (2020). doi: 10.1364/AO.389010
[37] Wang, T. Y. et al. CUDO: Closed-form universal dwelltime optimization for computer-controlled optical surfacing. Optics Express 33, 50201-50214 (2025). doi: 10.1364/OE.577940
[38] Huang, L. et al. Zonal wavefront reconstruction in quadrilateral geometry for phase measuring deflectometry. Applied Optics 56, 5139-5144 (2017). doi: 10.1364/AO.56.005139
[39] Seiboth, F. et al. Perfect X-ray focusing via fitting corrective glasses to aberrated optics. Nature Communications 8, 14623 (2017). doi: 10.1038/ncomms14623