Ten years of spasers and plasmonic nanolasers

  • Light: Science & Applications  9, Article number: 8 (2020)
More Information
  • Corresponding author:
    Cun-Zheng Ning (
  • Received: 31 March 2020
    Revised: 15 April 2020
    Accepted: 17 April 2020
    Published online: 25 May 2020


  • Ten years ago, three teams experimentally demonstrated the first spasers, or plasmonic nanolasers, after the spaser concept was first proposed theoretically in 2003. An overview of the significant progress achieved over the last 10 years is presented here, together with the original context of and motivations for this research. After a general introduction, we first summarize the fundamental properties of spasers and discuss the major motivations that led to the first demonstrations of spasers and nanolasers. This is followed by an overview of crucial technological progress, including lasing threshold reduction, dynamic modulation, room-temperature operation, electrical injection, the control and improvement of spasers, the array operation of spasers, and selected applications of single-particle spasers. Research prospects are presented in relation to several directions of development, including further miniaturization, the relationship with Bose–Einstein condensation, novel spaser-based interconnects, and other features of spasers and plasmonic lasers that have yet to be realized or challenges that are still to be overcome.
  • 加载中
  • [1] Townes, C. H. in A Century of Nature: Twenty-One Discoveries that Changed Science and the World (eds Garwin, L. & Lincoln, T.) 107–112 (University of Chicago Press, Chicago, 2003).
    [2] Schawlow, A. L. & Townes, C. H. Infrared and optical masers. Phys. Rev. 112, 1940–1949 (1958). doi: 10.1103/PhysRev.112.1940
    [3] Maiman, T. H. Stimulated optical radiation in ruby. Nature 187, 493–494 (1960). doi: 10.1038/187493a0
    [4] Krausz, F. & Stockman, M. I. Attosecond metrology: from electron capture to future signal processing. Nat. Photonics 8, 205–213 (2014). doi: 10.1038/nphoton.2014.28
    [5] Krausz, F. The birth of attosecond physics and its coming of age. Phys. Scripta 91, 63011 (2016). doi: 10.1088/0031-8949/91/6/063011
    [6] Hall, R. N. et al. Coherent light emission from GaAs junctions. Phys. Rev. Lett. 9, 366–368 (1962). doi: 10.1103/PhysRevLett.9.366
    [7] Popov, Y. M. On the history of the invention of the injection laser. Phys. Uspekhi 47, 1068–1070 (2004). doi: 10.1070/PU2004v047n10ABEH002077
    [8] Ning, C. Z. Semiconductor nanolasers and the size-energy-efficiency challenge: a review. Adv. Photonics 1, 014002 (2019). doi: 10.1117/1.AP.1.1.014002
    [9] Hill, M. T. & Gather, M. C. Advances in small lasers. Nat. Photonics 8, 908–918 (2014). doi: 10.1038/nphoton.2014.239
    [10] Painter, O. et al. Two-dimensional photonic band-gap defect mode laser. Science 284, 1819–1821 (1999). doi: 10.1126/science.284.5421.1819
    [11] Ning, C. Z. Semiconductor nanolasers. Phys. Status Solidi 247, 774–788 (2010). doi: 10.1002/pssb.200945436
    [12] Huang, M. H. et al. Room-temperature ultraviolet nanowire nanolasers. Science 292, 1897–1899 (2001). doi: 10.1126/science.1060367
    [13] Duan, X. F. et al. Single-nanowire elecctrically driven lasers. Nature 421, 241–245 (2003). doi: 10.1038/nature01353
    [14] Chin, A. H. et al. Near-infrared semiconductor subwavelength-wire lasers. Appl. Phys. Lett. 88, 163115 (2006). doi: 10.1063/1.2198017
    [15] Maslov, A. V. & Ning, C. Z. Far-field emission of a semiconductor nanowire laser. Opt. Letters 29, 572–574 (2004). doi: 10.1364/OL.29.000572
    [16] Eaton, S. W. et al. Semiconductor nanowire lasers. Nat. Rev. Mater. 1, 16028 (2016). doi: 10.1038/natrevmats.2016.28
    [17] Kaminow, I. P., Mammel, W. L. & Weber, H. P. Metal-clad optical waveguides: analytical and experimental study. Appl. Opt. 13, 396–405 (1974). doi: 10.1364/AO.13.000396
    [18] Maier, S. A. et al. Local detection of electromagnetic energy transport below the diffraction limit in metal nanoparticle plasmon waveguides. Nat. Mater. 2, 229–232 (2003). doi: 10.1038/nmat852
    [19] Kusunoki, F. et al. Propagation properties of guided waves in index-guided two-dimensional optical waveguides. Appl. Phys. Lett. 86, 211101 (2005). doi: 10.1063/1.1935034
    [20] Pile, D. F. P. et al. Two-dimensionally localized modes of a nanoscale gap plasmon waveguide. Appl. Phys. Lett. 87, 261114 (2005). doi: 10.1063/1.2149971
    [21] Dionne, J. A. et al. Plasmon slot waveguides: towards chip-scale propagation with subwavelength-scale localization. Phys. Rev. B 73, 035407 (2006). doi: 10.1103/PhysRevB.73.035407
    [22] Tanaka, K. & Tanaka, M. Simulations of nanometric optical circuits based on surface plasmon polariton gap waveguide. Appl. Phys. Lett.s 82, 1158–1160 (2003). doi: 10.1063/1.1557323
    [23] Zia, R. et al. Geometries and materials for subwavelength surface plasmon modes. J. Opt. Soc. Am. A 21, 2442–2446 (2004). doi: 10.1364/JOSAA.21.002442
    [24] Nezhad, M. P., Tetz, K. & Fainman, Y. Gain assisted propagation of surface plasmon polaritons on planar metallic waveguides. Opt. Express 12, 4072–4079 (2004). doi: 10.1364/OPEX.12.004072
    [25] Noginov, M. A. et al. Enhancement of surface plasmons in an Ag aggregate by optical gain in a dielectric medium. Opt. Lett. 31, 3022–3024 (2006). doi: 10.1364/OL.31.003022
    [26] Maier, S. A. Gain-assisted propagation of electromagnetic energy in subwavelength surface plasmon polariton gap waveguides. Opt. Commun. 258, 295–299 (2006). doi: 10.1016/j.optcom.2005.07.064
    [27] Hill, M. T. et al. Lasing in metallic-coated nanocavities. Nat. Photonics 1, 589–594 (2007). doi: 10.1038/nphoton.2007.171
    [28] Maslov, A. V. & Ning, C. Z. Size reduction of a semiconductor nanowire laser by using metal coating. Phys. Simul. Optoelectron. Devices XV 6468, 64680I (2007). doi: 10.1117/12.723786
    [29] Manolatou, C. & Rana, F. Subwavelength nanopatch cavities for semiconductor plasmon lasers. IEEE J. Quant. Electron. 44, 435–447 (2008). doi: 10.1109/JQE.2008.916707
    [30] Oulton, R. F. et al. A hybrid plasmonic waveguide for subwavelength confinement and long-range propagation. Nat. Photonics 2, 495–500 (2008). doi: 10.1038/nphoton.2008.131
    [31] Huang, J. Q., Kim, S. H. & Scherer, A. Design of a surface-emitting, subwavelength metal-clad disk laser in the visible spectrum. Opt. Express 18, 19581–19591 (2010). doi: 10.1364/OE.18.019581
    [32] Perahia, R. et al. Surface-plasmon mode hybridization in subwavelength microdisk lasers. Appl. Phys. Lett. 95, 201114 (2009). doi: 10.1063/1.3266843
    [33] Bergman, D. J. & Stockman, M. I. Surface plasmon amplification by stimulated emission of radiation: quantum generation of coherent surface plasmons in nanosystems. Phys. Rev. Lett. 90, 027402 (2003). doi: 10.1103/PhysRevLett.90.027402
    [34] Hill, M. T. et al. Lasing in metal-insulator-metal sub-wavelength plasmonic waveguides. Opt. Express 17, 11107–11112 (2009). doi: 10.1364/OE.17.011107
    [35] Oulton, R. F. et al. Plasmon lasers at deep subwavelength scale. Nature 461, 629–632 (2009). doi: 10.1038/nature08364
    [36] Noginov, M. A. et al. Demonstration of a spaser-based nanolaser. Nature 460, 1110–1112 (2009). doi: 10.1038/nature08318
    [37] Ma, R. M. & Oulton, R. F. Applications of nanolasers. Nat. Nanotechnol. 14, 12–22 (2019). doi: 10.1038/s41565-018-0320-y
    [38] Galanzha, E. I. et al. Spaser as a biological probe. Nat. Commun. 8, 15528 (2017). doi: 10.1038/ncomms15528
    [39] Gao, Z. S. et al. Spaser nanoparticles for ultranarrow bandwidth STED super-resolution imaging. Adv. Mater. 32, 1907233 (2020). doi: 10.1002/adma.201907233
    [40] Ma, R. M. et al. Room-temperature sub-diffraction-limited plasmon laser by total internal reflection. Nat. Mater. 10, 110–113 (2011). doi: 10.1038/nmat2919
    [41] Ma, R. M. et al. Multiplexed and electrically modulated plasmon laser circuit. Nano Lett. 12, 5396–5402 (2012). doi: 10.1021/nl302809a
    [42] Ma, R. M. et al. Explosives detection in a lasing plasmon nanocavity. Nat. Nanotechnol. 9, 600–604 (2014). doi: 10.1038/nnano.2014.135
    [43] Zhang, Q. et al. A room temperature low-threshold ultraviolet plasmonic nanolaser. Nat. Commun. 5, 4953 (2014). doi: 10.1038/ncomms5953
    [44] Wang, S. et al. High-yield plasmonic nanolasers with superior stability for sensing in aqueous solution. ACS Photonics 4, 1355–1360 (2017). doi: 10.1021/acsphotonics.7b00438
    [45] Wu, Z. Y. et al. All-inorganic CsPbBr3 nanowire based plasmonic lasers. Adv. Opt. Mater. 6, 1800674 (2018). doi: 10.1002/adom.201800674
    [46] Lu, Y. J. et al. Plasmonic nanolaser using epitaxially grown silver film. Science 337, 450–453 (2012). doi: 10.1126/science.1223504
    [47] Lu, Y. J. et al. All-color plasmonic nanolasers with ultralow thresholds: autotuning mechanism for single-mode lasing. Nano Lett. 14, 4381–4388 (2014). doi: 10.1021/nl501273u
    [48] Gwo, S. & Shih, C. K. Semiconductor plasmonic nanolasers: current status and perspectives. Rep. Prog. Phys. 79, 086501 (2016). doi: 10.1088/0034-4885/79/8/086501
    [49] Lee, C. J. et al. Low-threshold plasmonic lasers on a single-crystalline epitaxial silver platform at telecom wavelength. ACS Photonics 4, 1431–1439 (2017). doi: 10.1021/acsphotonics.7b00184
    [50] Kress, S. J. P. et al. A customizable class of colloidal-quantum-dot spasers and plasmonic amplifiers. Sci. Adv. 3, e1700688 (2017). doi: 10.1126/sciadv.1700688
    [51] Keshmariz, E. K., Tait, R. N. & Berini, P. Single-mode surface plasmon distributed feedback lasers. Nanoscale 10, 5914–5922 (2018). doi: 10.1039/C7NR09183D
    [52] Huang, C. et al. Formation of lead halide perovskite based plasmonic nanolasers and nanolaser arrays by tailoring the substrate. ACS Nano 12, 3865–3874 (2018). doi: 10.1021/acsnano.8b01206
    [53] Zhu, W. Q. et al. Surface plasmon polariton laser based on a metallic trench Fabry-Perot resonator. Sci. Adv. 3, e1700909 (2017). doi: 10.1126/sciadv.1700909
    [54] Suh, J. Y. et al. Plasmonic bowtie nanolaser arrays. Nano Lett. 12, 5769–5774 (2012). doi: 10.1021/nl303086r
    [55] Zhang, C. et al. Plasmonic lasing of nanocavity embedding in metallic nanoantenna array. Nano Lett. 15, 1382–1387 (2015). doi: 10.1021/nl504689s
    [56] Lu, C. Y. et al. Metal-cavity surface-emitting microlaser at room temperature. Applied Phys. Lett. 96, 251101 (2010). doi: 10.1063/1.3455316
    [57] Yu, K., Lakhani, A. & Wu, M. C. Subwavelength metal-optic semiconductor nanopatch lasers. Opt. Express 18, 8790–8799 (2010). doi: 10.1364/OE.18.008790
    [58] Wu, X. Q. et al. Hybrid photon-plasmon nanowire lasers. Nano Lett. 13, 5654–5659 (2013). doi: 10.1021/nl403325j
    [59] Nezhad, M. P. et al. Room-temperature subwavelength metallo-dielectric lasers. Nat. Photonics 4, 395–399 (2010). doi: 10.1038/nphoton.2010.88
    [60] Kwon, S. H. et al. Subwavelength plasmonic lasing from a semiconductor nanodisk with silver nanopan cavity. Nano Lett. 10, 3679–3683 (2010). doi: 10.1021/nl1021706
    [61] Shen, K. C. et al. Deep-ultraviolet hyperbolic metacavity laser. Adv. Mater. 30, 1706918 (2018). doi: 10.1002/adma.201706918
    [62] Lakhani, A. M. et al. Plasmonic crystal defect nanolaser. Opt. Express 19, 18237–18245 (2011). doi: 10.1364/OE.19.018237
    [63] Marell, M. J. H. et al. Plasmonic distributed feedback lasers at telecommunications wavelengths. Opt. Express 19, 15109–15118 (2011). doi: 10.1364/OE.19.015109
    [64] Kim, M. K., Lakhani, A. M. & Wu, M. C. Efficient waveguide-coupling of metal-clad nanolaser cavities. Opt. Express 19, 23504–23512 (2011). doi: 10.1364/OE.19.023504
    [65] Khajavikhan, M. et al. Thresholdless nanoscale coaxial lasers. Nature 482, 204–207 (2012). doi: 10.1038/nature10840
    [66] Ding, K. et al. Room-temperature continuous wave lasing in deep-subwavelength metallic cavities under electrical injection. Phys. Rev. B 85, 041301 (2012). doi: 10.1103/PhysRevB.85.041301
    [67] Gu, Q. et al. Amorphous Al2O3 shield for thermal management in electrically pumped metallo-dielectric nanolasers. IEEE J. Quant. Electron. 50, 499–509 (2014). doi: 10.1109/JQE.2014.2321746
    [68] Dolores-Calzadilla, V. et al. Waveguide-coupled nanopillar metal-cavity light-emitting diodes on silicon. Nat. Commun. 8, 14323 (2017). doi: 10.1038/ncomms14323
    [69] Ding, K. et al. Modulation bandwidth and energy efficiency of metallic cavity semiconductor nanolasers with inclusion of noise effects. Laser Photonics Rev. 9, 488–497 (2015). doi: 10.1002/lpor.201500037
    [70] Ding, K. & Ning, C. Z. Metallic subwavelength-cavity semiconductor nanolasers. Light Sci. Appl. 1, e20 (2012). doi: 10.1038/lsa.2012.20
    [71] Wang, X. Y. et al. Lasing enhanced surface plasmon resonance sensing. Nanophotonics 6, 472–478 (2017). doi: 10.1515/nanoph-2016-0006
    [72] Cheng, P. J. et al. High-performance plasmonic nanolasers with a nanotrench defect cavity for sensing applications. ACS Photonics 5, 2638–2644 (2018). doi: 10.1021/acsphotonics.8b00337
    [73] Fan, X. D. & Yun, S. H. The potential of optofluidic biolasers. Nat. Methods 11, 141–147 (2014). doi: 10.1038/nmeth.2805
    [74] Zhou, W. et al. Lasing action in strongly coupled plasmonic nanocavity arrays. Nat. Nanotechnol. 8, 506–511 (2013). doi: 10.1038/nnano.2013.99
    [75] Van Beijnum, F. et al. Surface plasmon lasing observed in metal hole arrays. Phys. Rev. Lett. 110, 206802 (2013). doi: 10.1103/PhysRevLett.110.206802
    [76] Schokker, A. H. & Koenderink, A. F. Lasing in quasi-periodic and aperiodic plasmon lattices. Optica 3, 686–693 (2016). doi: 10.1364/OPTICA.3.000686
    [77] Wang, D. Q. et al. Band-edge engineering for controlled multi-modal nanolasing in plasmonic superlattices. Nat. Nanotechnol. 12, 889–894 (2017). doi: 10.1038/nnano.2017.126
    [78] Wang, D. Q. et al. Stretchable nanolasing from hybrid quadrupole plasmons. Nano Lett. 18, 4549–4555 (2018). doi: 10.1021/acs.nanolett.8b01774
    [79] Lei, Z. Y. et al. Surface-emitting surface plasmon polariton laser in a second-order distributed feedback defect cavity. ACS Photonics 6, 612–619 (2019). doi: 10.1021/acsphotonics.8b01789
    [80] Ding, K. & Ning, C. Z. Fabrication challenges of electrical injection metallic cavity semiconductor nanolasers. Semicond. Sci. Technol. 28, 124002 (2013). doi: 10.1088/0268-1242/28/12/124002
    [81] Kudyshev, Z. A. et al. Artificial-intelligence-assisted photonics (Conference Presentation). In Proc. SPIE 11080, Metamaterials, Metadevices, and Metasystems 2019 (SPIE, San Diego, California, 2019).
    [82] Stockman, M. I. The spaser as a nanoscale quantum generator and ultrafast amplifier. J. Opt. 12, 024004 (2010). doi: 10.1088/2040-8978/12/2/024004
    [83] Stockman, M. I. Nanoplasmonics: past, present, and glimpse into future. Opt. Express 19, 22029–22106 (2011). doi: 10.1364/OE.19.022029
    [84] Haken, H. Laser Theory (Springer-Verlag, Berlin, 1983).
    [85] Sidiropoulos, T. P. H. et al. Ultrafast plasmonic nanowire lasers near the surface plasmon frequency. Nat. Phys. 10, 870–876 (2014). doi: 10.1038/nphys3103
    [86] Ning, C. Z. What is laser threshold? IEEE J. Select. Top. Quant. Electron. 19, 1503604 (2013). doi: 10.1109/JSTQE.2013.2259222
    [87] Chow, W. W., Jahnke, F. & Gies, C. Emission properties of nanolasers during the transition to lasing. Light Sci. Appl. 3, e201 (2014). doi: 10.1038/lsa.2014.82
    [88] Stevens, M. J. et al. High-order temporal coherences of chaotic and laser light. Opt. Express 18, 1430–1437 (2010). doi: 10.1364/OE.18.001430
    [89] Feynman, R. P. There's plenty of room at the bottom. Caltech Eng. Sci. 23, 22–36 (1960).
    [90] Novotny, L. & Stranick, S. J. Near-field optical microscopy and spectroscopy with pointed probes. Ann. Rev. Phys. Chem. 57, 303–331 (2006). doi: 10.1146/annurev.physchem.56.092503.141236
    [91] Johnson, T. W. et al. Highly reproducible near-field optical imaging with sub-20-nm resolution based on template-stripped gold pyramids. ACS Nano 6, 9168–9174 (2012). doi: 10.1021/nn303496g
    [92] Novotny, L. & Hecht, B. Principles of Nano-Optics (Cambridge University Press, Cambridge, 2012).
    [93] Stockman, M. I. Nanoplasmonic sensing and detection. Science 348, 287–288 (2015). doi: 10.1126/science.aaa6805
    [94] Stockman, M. I., Faleev, S. V. & Bergman, D. J. Localization versus delocalization of surface plasmons in nanosystems: can one state have both characteristics? Phys. Rev. Lett. 87, 167401 (2001). doi: 10.1103/PhysRevLett.87.167401
    [95] Pauli, W. The connection between spin and statistics. Phys. Rev. J. Arch. 58, 716–722 (1940). doi: 10.1103/PhysRev.58.716
    [96] Stockman, M. I. Spasers explained. Nat. Photonics 2, 327–329 (2008).
    [97] Stockman, M. I. & Bergman, D. J. Surface plasmon amplification by stimulated emission of radiation (SPASER). US patent: US20040155184A1 (2009).
    [98] Stockman, M. I. & Bergman, D. J. Method for surface plasmon amplification by stimulated emission of radiation (SPASER). US patent: US8017406B2 (2011).
    [99] Stockman, M. Spasers to speed up CMOS processors. US patent: 10, 096, 675 (2018).
    [100] Brorson, S. D., Yokoyama, H. & Ippen, E. P. Spontaneous emission rate alteration in optical waveguide structures. IEEE J. Quant. Electron. 26, 1492–1499 (1990). doi: 10.1109/3.102626
    [101] Yokoyama, H. et al. Controlling spontaneous emission and threshold-less laser oscillation with optical microcavities. Opt. Quant. Electron. 24, S245–S272 (1992). doi: 10.1007/BF00625827
    [102] Bjork, G. & Yamamoto, Y. Analysis of semiconductor microcavity lasers using rate equations. IEEE J. Quant. Electron. 27, 2386–2396 (1991). doi: 10.1109/3.100877
    [103] Noda, S. Seeking the ultimate nanolaser. Science 314, 260–261 (2006). doi: 10.1126/science.1131322
    [104] Ma, R. M. Lasing under ultralow pumping. Nat. Mater. 18, 1152–1153 (2019). doi: 10.1038/s41563-019-0513-2
    [105] Purcell, E. M. Spontaneous emission probabilities at radio frequencies. Phys. Rev. 69, 681 (1946). doi: 10.1103/PhysRev.69.37
    [106] Altug, H., Englund, D. & Vučković, J. Ultrafast photonic crystal nanocavity laser. Nat. Phys. 2, 484–488 (2006). doi: 10.1038/nphys343
    [107] Lau, E. K. et al. Enhanced modulation bandwidth of nanocavity light emitting devices. Opt. Express 17, 7790–7799 (2009). doi: 10.1364/OE.17.007790
    [108] Ni, C. Y. A. & Chuang, S. L. Theory of high-speed nanolasers and nanoLEDs. Opt. Express 20, 16450–16470 (2012). doi: 10.1364/OE.20.016450
    [109] Pan, S. H. et al. Nanolasers: second-order intensity correlation, direct modulation and electromagnetic isolation in array architectures. Prog. Quant. Electron. 59, 1–18 (2018). doi: 10.1016/j.pquantelec.2018.05.001
    [110] MacDonald, K. F. et al. Ultrafast active plasmonics. Nat. Photonics 3, 55–58 (2009). doi: 10.1038/nphoton.2008.249
    [111] Shore, K. A. Modulation bandwidth of metal-clad semiconductor nanolasers with cavity-enhanced spontaneous emission. Electron. Lett. 46, 1688–1689 (2010). doi: 10.1049/el.2010.2535
    [112] Suhr, T. et al. Modulation response of nanoLEDs and nanolasers exploiting Purcell enhanced spontaneous emission. Opt. Express 18, 11230–11241 (2010). doi: 10.1364/OE.18.011230
    [113] Aust, R. et al. Modulation response of nanolasers: what rate equation approaches miss. Opt. Quant. Electron. 48, 109 (2016). doi: 10.1007/s11082-016-0378-4
    [114] Li, D. B. & Ning, C. Z. Peculiar features of confinement factors in a metal-semiconductor waveguide. Appl. Phys. Lett. 96, 181109 (2010). doi: 10.1063/1.3425896
    [115] Maslov, A. V. & Ning, C. Z. Modal gain in a semiconductor nanowire laser with anisotropic bandstructure. IEEE J. Quant. Electron. 40, 1389–1397 (2004). doi: 10.1109/JQE.2004.834767
    [116] Li, D. B. & Ning, C. Z. Giant modal gain, amplified surface plasmon-polariton propagation, and slowing down of energy velocity in a metal-semiconductor-metal structure. Phys. Rev. B 80, 153304 (2009). doi: 10.1103/PhysRevB.80.153304
    [117] Ho, J. et al. Low-threshold near-infrared GaAs-AlGaAs core-shell nanowire plasmon laser. ACS Photonics 2, 165–171 (2015). doi: 10.1021/ph5003945
    [118] Chou, Y. H. et al. High-operation-temperature plasmonic nanolasers on single-crystalline aluminum. Nano Lett. 16, 3179–3186 (2016). doi: 10.1021/acs.nanolett.6b00537
    [119] Khurgin, J. B. & Sun, G. Comparative analysis of spasers, vertical-cavity surface-emitting lasers and surface-plasmon-emitting diodes. Nat. Photonics 8, 468–473 (2014). doi: 10.1038/nphoton.2014.94
    [120] Wang, S. et al. Unusual scaling laws for plasmonic nanolasers beyond the diffraction limit. Nat. Commun. 8, 1889 (2017). doi: 10.1038/s41467-017-01662-6
    [121] Fernandez-Bravo, A. et al. Ultralow-threshold, continuous-wave upconverting lasing from subwavelength plasmons. Nat. Mater. 18, 1172–1176 (2019). doi: 10.1038/s41563-019-0482-5
    [122] Ulrich, S. M. et al. Photon statistics of semiconductor microcavity lasers. Phys. Rev. Lett. 98, 043906 (2007). doi: 10.1103/PhysRevLett.98.043906
    [123] Chow, W. W. & Reitzenstein, S. Quantum-optical influences in optoelectronics—an introduction. Appl. Phys. Rev. 5, 041302 (2018). doi: 10.1063/1.5045580
    [124] Ding, K. et al. An electrical injection metallic cavity nanolaser with azimuthal polarization. Appl. Phys. Lett. 102, 041110 (2013). doi: 10.1063/1.4775803
    [125] Ding, K. et al. Record performance of electrical injection sub-wavelength metallic-cavity semiconductor lasers at room temperature. Opt. Express 21, 4728–4733 (2013). doi: 10.1364/OE.21.004728
    [126] Li, D. B. & Ning, C. Z. Interplay of various loss mechanisms and ultimate size limit of a surface plasmon polariton semiconductor nanolaser. Opt. Express 20, 16348–16357 (2012). doi: 10.1364/OE.20.016348
    [127] Li, D. & Ning, C. Z. Electrical injection in longitudinal and coaxial heterostructure nanowires: A comparative study through a three-dimensional simulation. Nano Lett. 8, 4234–4237 (2008). doi: 10.1021/nl801894z
    [128] Hu, J. et al. Fringing field effects on electrical resistivity of semiconductor nanowire-metal contacts. Appl. Phys. Lett. 92, 083503 (2008). doi: 10.1063/1.2889534
    [129] Ding, K. et al. Electrical injection, continuous wave operation of subwavelength-metallic-cavity lasers at 260 K. Appl. Phys. Lett. 98, 231108 (2011). doi: 10.1063/1.3598961
    [130] Lee, J. H. et al. Electrically pumped sub-wavelength metallo-dielectric pedestal pillar lasers. Opt. Express 19, 21524–21531 (2011). doi: 10.1364/OE.19.021524
    [131] Wang, S., Chen, H. Z. & Ma, R. M. High performance plasmonic nanolasers with external quantum efficiency exceeding 10%. Nano Lett. 18, 7942–7948 (2018). doi: 10.1021/acs.nanolett.8b03890
    [132] Chen, H. Z. et al. Imaging the dark emission of spasers. Sci. Adv. 3, e1601962 (2017). doi: 10.1126/sciadv.1601962
    [133] Qi, B. K. et al. Parity-time symmetry synthetic lasers: physics and devices. Adv. Opt. Mater. 7, 1900694 (2019). doi: 10.1002/adom.201900694
    [134] Chen, H. Z. et al. Revealing the missing dimension at an exceptional point. Nat. Phys. (2020).
    [135] Wu, J. S., Apalkov, V. & Stockman, M. I. Topological spaser. Phys. Rev. Lett. 124, 017701 (2020).
    [136] Xie, Y. Y. et al. Metasurface-integrated vertical cavity surface-emitting lasers for programmable directional lasing emissions. Nat. Nanotechnol. 15, 125–130 (2020). doi: 10.1038/s41565-019-0611-y
    [137] Shao, Z. K. et al. A high-performance topological bulk laser based on band-inversion-induced reflection. Nat. Nanotechnol. 15, 67–72 (2020). doi: 10.1038/s41565-019-0584-x
    [138] Meng, X. G. et al. Unidirectional spaser in symmetry-broken plasmonic core-shell nanocavity. Sci. Rep. 3, 1241 (2013). doi: 10.1038/srep01241
    [139] Meng, X. G. et al. Wavelength-tunable spasing in the visible. Nano Lett. 13, 4106–4112 (2013). doi: 10.1021/nl4015827
    [140] Song, P. et al. Three-level spaser for next-generation luminescent nanoprobe. Sci. Adv. 4, eaat0292 (2018). doi: 10.1126/sciadv.aat0292
    [141] Bordo, V. G. Cooperative effects in spherical spasers: Ab initio analytical model. Phys. Rev. B 95, 235412 (2017). doi: 10.1103/PhysRevB.95.235412
    [142] Shesterikov, A. V. et al. On the effect of dipole–dipole interactions on the quantum statistics of surface plasmons in multiparticle spaser systems. JETP Lett. 107, 435–439 (2018). doi: 10.1134/S0021364018070081
    [143] Petrosyan, L. S. & Shahbazyan, T. V. Spaser quenching by off-resonant plasmon modes. Phys. Rev. B 96, 075423 (2017). doi: 10.1103/PhysRevB.96.075423
    [144] Zheludev, N. I. et al. Lasing spaser. Nat. Photonics 2, 351–354 (2008).
    [145] Xiao, S. M. et al. Loss-free and active optical negative-index metamaterials. Nature 466, 735–738 (2010). doi: 10.1038/nature09278
    [146] Meng, X. G. et al. Highly directional spaser array for the red wavelength region. Laser Photonics Rev. 8, 896–903 (2014). doi: 10.1002/lpor.201400056
    [147] Huang, Y. W. et al. Toroidal lasing spaser. Sci. Rep. 3, 1237 (2013). doi: 10.1038/srep01237
    [148] Pourjamal, S. et al. Lasing in Ni nanodisk arrays. ACS Nano 13, 5686–5692 (2019). doi: 10.1021/acsnano.9b01006
    [149] Chandrasekar, R. et al. Lasing action with gold nanorod hyperbolic metamaterials. ACS Photonics 4, 674–680 (2017). doi: 10.1021/acsphotonics.7b00010
    [150] Yang, A. K. et al. Real-time tunable lasing from plasmonic nanocavity arrays. Nat. Commun. 6, 6939 (2015). doi: 10.1038/ncomms7939
    [151] Ramezani, M. et al. Plasmon-exciton-polariton lasing. Optica 4, 31–37 (2017). doi: 10.1364/OPTICA.4.000031
    [152] Hell, S. W. & Wichmann, J. Breaking the diffraction resolution limit by stimulated emission: stimulated-emission-depletion fluorescence microscopy. Opt. Lett. 19, 780–782 (1994). doi: 10.1364/OL.19.000780
    [153] Hell, S. W. Microscopy and its focal switch. Nat. Methods 6, 24–32 (2009). doi: 10.1038/nmeth.1291
    [154] Pustovit, V. N. et al. Coulomb and quenching effects in small nanoparticle-based spasers. Phys. Rev. B 93, 165432 (2016). doi: 10.1103/PhysRevB.93.165432
    [155] Li, X. F. & Yu, S. F. Design of low-threshold compact Au-nanoparticle lasers. Opt. Lett. 35, 2535–2537 (2010). doi: 10.1364/OL.35.002535
    [156] Baranov, D. G. et al. Exactly solvable toy model for surface plasmon amplification by stimulated emission of radiation. Optics Express 21, 10779–10791 (2013). doi: 10.1364/OE.21.010779
    [157] Arnold, N. et al. Spasers with retardation and gain saturation: electrodynamic description of fields and optical cross-sections. Opt. Mater. Express 5, 2546–2577 (2015). doi: 10.1364/OME.5.002546
    [158] Nagra, A. S. & York, R. A. FDTD analysis of wave propagation in nonlinear absorbing and gain media. IEEE Trans. Antennas Propag. 46, 334–340 (1998). doi: 10.1109/8.662652
    [159] Chang, S. H. & Taflove, A. Finite-difference time-domain model of lasing action in a four-level two-electron atomic system. Opt. Express 12, 3827–3833 (2004). doi: 10.1364/OPEX.12.003827
    [160] Gongora, J. S. T. et al. Energy equipartition and unidirectional emission in a spaser nanolaser. Laser Photonics Rev. 10, 432–440 (2016). doi: 10.1002/lpor.201500239
    [161] Chua, S. L. et al. Modeling of threshold and dynamics behavior of organic nanostructured lasers. J. Mater. Chem. C 2, 1463–1473 (2014). doi: 10.1039/c3tc31870b
    [162] Pusch, A. et al. Coherent amplification and noise in gain-enhanced nanoplasmonic metamaterials: A maxwell-bloch langevin approach. ACS Nano 6, 2420–2431 (2012). doi: 10.1021/nn204692x
    [163] Kristanz, G. V. et al. Power balance and temperature in optically pumped spasers and nanolasers. ACS Photonics 5, 3695–3703 (2018). doi: 10.1021/acsphotonics.8b00705
    [164] Trivedi, D. J. et al. Model for describing plasmonic nanolasers using Maxwell-Liouville equations with finite-difference time-domain calculations. Phys. Rev. A 96, 053825 (2017). doi: 10.1103/PhysRevA.96.053825
    [165] Azzam, S. I. et al. Exploring time-resolved multiphysics of active plasmonic systems with experiment-based gain models. Laser Photonics Rev. 13, 1800071 (2018). doi: 10.1002/lpor.201800071
    [166] Ning, C. Z. in Selforganization in Complex Systems: the Past, Present, and Future of Synergetics (eds Wunner, G. & Pelster, A.) 109–128 (Springer, Cham, 2016).
    [167] Fan, F. et al. Fabrication and room temperature operation of semiconductor nano-ring lasers using a general applicable membrane transfer method. Appl. Phys. Lett. 110, 171105 (2017). doi: 10.1063/1.4982621
    [168] Li, D. B. & Ning, C. Z. All-semiconductor active plasmonic system in mid-infrared wavelengths. Opt. Express 19, 14594–14603 (2011). doi: 10.1364/OE.19.014594
    [169] Chikkaraddy, R. et al. Single-molecule strong coupling at room temperature in plasmonic nanocavities. Nature 535, 127–130 (2016). doi: 10.1038/nature17974
    [170] Li, Y. Z. et al. Optical properties and light-emission device applications of 2-D Layered Semiconductors. In Proc. IEEE 1–28, (2019).
    [171] Zheng, D. et al. Manipulating coherent plasmon-exciton interaction in a single silver nanorod on monolayer WSe2. Nano Lett. 17, 3809–3814 (2017). doi: 10.1021/acs.nanolett.7b01176
    [172] Wang, Z. et al. Giant photoluminescence enhancement in tungsten-diselenide-gold plasmonic hybrid structures. Nat. Commun. 7, 11283 (2016). doi: 10.1038/ncomms11283
    [173] Lee, B. et al. Fano resonance and spectrally modified photoluminescence enhancement in monolayer MoS2 integrated with plasmonic nanoantenna array. Nano Lett. 15, 3646–3653 (2015). doi: 10.1021/acs.nanolett.5b01563
    [174] Han, X. B. et al. Rabi splitting in a plasmonic nanocavity coupled to a WS2 monolayer at room temperature. ACS Photonics 5, 3970–3976 (2018). doi: 10.1021/acsphotonics.8b00931
    [175] Chernikov, A. et al. Population inversion and giant bandgap renormalization in atomically thin WS2 layers. Nat. Photonics 9, 466–470 (2015). doi: 10.1038/nphoton.2015.104
    [176] Wang, Z. et al. Excitonic complexes and optical gain in two-dimensional molybdenum ditelluride well below the Mott transition. Light Sci. Appl. 9, 39 (2020). doi: 10.1038/s41377-020-0278-z
    [177] Wu, S. F. et al. Monolayer semiconductor nanocavity lasers with ultralow thresholds. Nature 520, 69–72 (2015). doi: 10.1038/nature14290
    [178] Ye, Y. et al. Monolayer excitonic laser. Nat. Photonics 9, 733–737 (2015). doi: 10.1038/nphoton.2015.197
    [179] Li, Y. Z. et al. Room-temperature continuous-wave lasing from monolayer molybdenum ditelluride integrated with a silicon nanobeam cavity. Nat. Nanotechnol. 12, 987–992 (2017). doi: 10.1038/nnano.2017.128
    [180] Kavokin, A. V. et al. Microcavities (Oxford University Press, Oxford, 2011).
    [181] Carusotto, I. & Ciuti, C. Quantum fluids of light. Rev. Mod. Phys. 85, 299–366 (2013). doi: 10.1103/RevModPhys.85.299
    [182] Kasprzak, J. et al. Bose-Einstein condensation of exciton polaritons. Nature 443, 409–414 (2006). doi: 10.1038/nature05131
    [183] Daskalakis, K. S. et al. Nonlinear interactions in an organic polariton condensate. Nat. Mater. 13, 271–278 (2014). doi: 10.1038/nmat3874
    [184] Plumhof, J. D. et al. Room-temperature Bose–Einstein condensation of cavity exciton-polaritons in a polymer. Nat. Mater. 13, 247–252 (2014). doi: 10.1038/nmat3825
    [185] Klaers, J. et al. Bose-Einstein condensation of photons in an optical microcavity. Nature 468, 545–548 (2010). doi: 10.1038/nature09567
    [186] Klaers, J., Vewinger, F. & Weitz, M. Thermalization of a two-dimensional photonic gas in a 'white wall' photon box. Nat. Phys. 6, 512–515 (2010). doi: 10.1038/nphys1680
    [187] Marelic, J., Walker, B. T. & Nyman, R. A. Phase-space views into dye-microcavity thermalized and condensed photons. Phys. Rev. A 94, 063812 (2016). doi: 10.1103/PhysRevA.94.063812
    [188] Marelic, J. et al. Spatiotemporal coherence of non-equilibrium multimode photon condensates. N. J. Phys. 18, 103012 (2016). doi: 10.1088/1367-2630/18/10/103012
    [189] Walker, B. T. et al. Driven-dissipative non-equilibrium Bose–Einstein condensation of less than ten photons. Nat. Phys. 14, 1173–1177 (2018). doi: 10.1038/s41567-018-0270-1
    [190] Hakala, T. K. et al. Bose–Einstein condensation in a plasmonic lattice. Nat. Phys. 14, 739–744 (2018). doi: 10.1038/s41567-018-0109-9
    [191] Nyman, R. A. & Walker, B. T. Bose–Einstein condensation of photons from the thermodynamic limit to small photon numbers. J. Mod. Opt. 65, 754–766 (2018). doi: 10.1080/09500340.2017.1404655
    [192] Eggleston, M. S. et al. Optical antenna enhanced spontaneous emission. Proc. Natl Acad. Sci. USA 112, 1704–1709 (2015). doi: 10.1073/pnas.1423294112
    [193] Li, D. B. & Stockman, M. I. Electric spaser in the extreme quantum limit. Phys. Rev. Lett. 110, 106803 (2013). doi: 10.1103/PhysRevLett.110.106803
通讯作者: 陈斌,
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索


Article Metrics

Article views(48) PDF downloads(3) Citation(0) Citation counts are provided from Web of Science. The counts may vary by service, and are reliant on the availability of their data.

Ten years of spasers and plasmonic nanolasers

  • 1. School of Electrical & Computer Engineering and Birck Nanotechnology Center, Purdue University, West Lafayette, IN 47907, USA
  • 2. Purdue Quantum Science and Engineering Institute, Purdue University, West Lafayette, IN 47907, USA
  • 3. State Key Lab for Mesoscopic Physics and School of Physics, Peking University, Beijing, China
  • 4. Frontiers Science Center for Nano-optoelectronics & Collaborative Innovation Center of Quantum Matter, Beijing, China
  • 5. Department of Electronic Engineering and International Center for NanoOptoelectronics, Tsinghua University, 100084 Beijing, China
  • 6. School of Electrical, Computer, and Energy Engineering, Arizona State University, Tempe, AZ 85287, USA
  • 7. The Blackett Laboratory, Imperial College London, South Kensington, London SW7 2AZ, UK
  • 8. Center for Nano-Optics (CeNO) and Department of Physics and Astronomy, Georgia State University, Atlanta, GA 30303, USA
  • 9. Nanoscale Science and Engineering Center, University of California, Berkeley, Berkeley, CA 94720, USA
  • 10. Faculties of Sciences and Engineering, University of Hong Kong, Hong Kong, China
  • Corresponding author:

    Cun-Zheng Ning,


Abstract: Ten years ago, three teams experimentally demonstrated the first spasers, or plasmonic nanolasers, after the spaser concept was first proposed theoretically in 2003. An overview of the significant progress achieved over the last 10 years is presented here, together with the original context of and motivations for this research. After a general introduction, we first summarize the fundamental properties of spasers and discuss the major motivations that led to the first demonstrations of spasers and nanolasers. This is followed by an overview of crucial technological progress, including lasing threshold reduction, dynamic modulation, room-temperature operation, electrical injection, the control and improvement of spasers, the array operation of spasers, and selected applications of single-particle spasers. Research prospects are presented in relation to several directions of development, including further miniaturization, the relationship with Bose–Einstein condensation, novel spaser-based interconnects, and other features of spasers and plasmonic lasers that have yet to be realized or challenges that are still to be overcome.

  • Among the discoveries and inventions that have defined science, technology and, generally, civilization as we know it, the invention of the laser 60 years ago stands out1-3. Lasers provide the unique capability to concentrate energy in the form of coherent radiation in the smallest phase-space volume possible in optics. This allows the formation of coherent beams with a minimum angular divergence or the focusing of radiation to the smallest possible spots, with sizes down to a half-wavelength. Lasers also allow the concentration of optical energy in the time domain to the shortest possible pulses, with a duration on the order of a single optical cycle, providing access to sub-cycle phenomena with durations on the order of 100 attoseconds4, 5.

    Historically, lasers were heralded for their monochromaticity, high intensity, and low beam divergence; however, today, stimulated emission is utilized as a tool that offers exquisite control to engineer light fields with well-defined frequencies, statistical properties, polarizations, and spatial profiles. The range of applications is vast. Miniaturization has always been a persistent topic of research in photonics; just 2 years after Maiman's first laser3, semiconductor lasers6 emerged, which were orders of magnitude smaller. Technologically, semiconductor lasers are naturally more compact, but with the advent of heterostructures7, they also became able to operate at lower power under electrical injection, even under battery power. As transistor scaling and integration set in motion the microelectronics and computer revolutions, the integration of microelectronics with photonics was long perceived to be unavoidable8. When the smallest dimensions of lasers eventually reached wavelength scales in the 1990s (see, e.g., ref. 9), they were still several orders of magnitude larger than transistors. However, it was realized that micro- and nanoscale optical resonators could be utilized to control spontaneous emission. From this paradigm, spontaneous emission control emerged as a modern topic of research in the field of nanolasers.

    By the turn of the millennium, optically pumped photonic crystal (PC) nanolasers were among the smallest devices10. Other forms of small lasers soon followed starting in the early 2000s11, such as nanowire lasers12-16. However, the quest to reduce the resonator size made it extremely difficult to produce such small PC lasers operating under electrical injection. Metal contacts that closely approached the cavity inevitably introduced both scattering and absorption losses. Complications of poor heat conduction and low mechanical stability also arose as these devices were constructed from thin suspended membranes of semiconductor material. Meanwhile, many studies on metallic waveguides were indicating the possibility of confinement beyond the wavelength range of light17-23. As such approaches introduced metallic loss, integrated gain strategies were also devised to prolong the propagation of light24-26. The final ingredient, and the key to effectively scaling down the physical size of lasers, was the emergence of metal-based cavities operating in dielectric modes27 or plasmonic modes in 200728. Such devices embraced the capability of metals to provide all of the requirements for any laser29-32: optical confinement, feedback, electrical contacts, and thermal management33-36. Such approaches relied on metals to support surface electromagnetic waves that used electron oscillations to promote optical confinement. It was Bergman and Stockman33 who first realized in 2003 that these surface plasmon waves could also be amplified by stimulated emission. Thus, the concept of the spaser (an acronym for surface plasmon amplification by stimulated emission of radiation) was born. This realization provoked considerable interest due to the predicted ability of such a new device to generate coherent plasmonic fields, along with the prospective applications of this capability.

    Ten years ago, three teams34-36 independently demonstrated the first plasmonic nanolasers, or spasers, from different perspectives and with different motivations (Fig. 1). These plasmonic nanolasers are extremely compact coherent light sources with ultrafast dynamics and a broad palette of promising applications8, 37. The original spaser design was a nanoshell-based localized surface plasmon (LSP) spaser36 containing a metal nanosphere as the plasmonic core, surrounded by a dielectric shell containing a gain material, typically dye molecules. Since then, other nanoshell LSP spasers have been reported38, 39. Such spasers are the smallest coherent generators produced so far, with sizes on the order of several to tens of nanometers. On the other hand, devices that were originally termed plasmonic nanolasers34, 35 are based on semiconductor-metal plasmonic gap modes with a surface plasmon polariton (SPP) mode propagating in one of the dimensions. In terms of the physics principles at work, these SPP nanolasers34, 35 are the same as spasers36, with the only difference being whether localized36 or propagating plasmon modes34, 35 are involved. Therefore, we will not intentionally distinguish in this paper between SPP nanolasers and LSP spasers, and we use the two terms interchangeably. Later, this type of nanolaser (or SPP spaser) was widely developed and perfected40-45. There are also LSP nanospasers that are similar in design to SPP nanolasers but are true nanospasers whose dimensions are all on the nanoscale. Such a spaser consists of a semiconductor nanorod as a gain material deposited on top of a single-crystal nanofilm of a plasmonic metal46. These spasers possess very low thresholds and have been demonstrated for wavelengths spanning the visible spectrum by changing the semiconductor composition while keeping the geometry fixed47-49. A similar SPP spaser has also been demonstrated with quantum-dot gain media50. The great progress achieved over the last decade has led to rapid evolution from the very preliminary proof-of-concept demonstrations to a great variety of plasmonic nanolaser designs32, 46, 51-63 (Fig. 2), including more realistic devices aimed at specific applications. For example, their intrinsic capabilities suggest their potential for application in optical interconnects8, 41, 64-70, near-field spectroscopy and sensing42, 44, 53, 71, 72, optical probing for biological systems38, 73, and far-field beam synthesis through near-field eigenmode engineering55, 74-79. Although critical design problems still challenge the research community, there are also unprecedented opportunities for new advances in enhancing gain8, 80 and plasmonic materials, artificial intelligence (AI)-driven optimal designs81, and fabrication protocols80 that would enable new, extremely compact devices with ultrafast operation speeds.

    Fig. 1  The first reported plasmonic nanolasers, or spasers, in 2009.

    a Nanolaser based on a metal-insulator-semiconductor-insulator-metal plasmonic gap mode, where vertical confinement was achieved by means of a double heterostructure34. b Plasmonic nanolaser based on a two-dimensionally confined nanowire plasmonic mode35. c Spaser based on a three-dimensionally confined metal nanoparticle mode36.

    Fig. 2  Zoo of nanolasers designed since the first demonstrations of plasmonic nanolasers in 2009.

    a A cavity combining distributed Bragg reflectors with metal56. b A double-patch metal cavity57. c A core-shell nanowire on a single-crystal silver film46. d A CdSe nanowire tangentially coupled to a silver wire58. e A semiconductor-metal co-axial cavity59. f quantum wells in a metal pan60. g A microdisk laser with a plasmonic disk32. h A metamaterial laser61. ik 1D plasmonic crystal lasers51, 62, 63. l A perovskite-based plasmonic nanolaser52. m A metallic trench Fabry–Pérot resonator plasmonic nanolaser53. n, o 2D plasmonic crystal nanolasers54, 55.

    This review article provides a historical overview of spaser and plasmonic nanolaser research over the past decade. We aim to place recent breakthroughs into the context of the original historical motivations for laser miniaturization. This review article does not attempt to focus on the applications of nanolasers, which have recently been covered elsewhere8, 37. Rather, it is a commentary on how we can exploit the control that laser miniaturization offers. The purpose of this review is thus to identify potential future research directions that build on our current perspective. For example, nanolasers naturally offer the highest available degree of control over both spontaneous and stimulated emission processes. Some interesting questions arise: If we are able to effectively control spontaneous emission into a single mode, would such an LED be sufficient without driving above the threshold into lasing? How small can a nanolaser be? Are the smallest nanolasers necessary, or is there an optimal length scale to ensure that other attributes meet essential application requirements, such as the energy efficiency and signal-to-noise ratio8, 69?

Fundamental properties of spasers
  • A schematic of the geometry and fundamental operating principles of a spaser is presented in Fig. 3. The gain medium depicted in Fig. 3 can be either a nanoshell consisting of a bulk semiconductor, semiconductor (colloidal) quantum dots (QDs), or dye molecules. For concreteness, we will describe the operation of a spaser in terms of a bulk semiconductor nanoshell; the cases of QDs and dye molecules are quite similar.

    Fig. 3  Conceptual schematic of a realistic spaser geometry and composition as well as its action principle82.

    a Schematic of the geometry and composition of a nanoshell spaser surrounded by a gain medium. The local fields (per one plasmon in the dipolar spasing mode) are shown with the color scale defined by the bar to the right. The plasmonic nanoshell and gain medium (orange dots) are indicated. b The same as a but for the gain medium inside the shell. c Schematic of spaser operation. The energy levels of the gain medium are depicted to the left, and those of the plasmonic core (the nanoshell, in this case) are shown to the right. An external source (optical or electrical, indicated by a vertical black arrow) injects electrons into the conduction band, creating a non-equilibrium (hot) electron-hole plasma. The hot carriers relax to the bandgap (vertical green arrow), possibly forming excitons. These excitations decay radiationlessly, transferring their energy to SPs of the nanoshell (shown by coupled red arrows). These SPs stimulate the emission of more SPs, causing an avalanche of generation that is eventually stabilized by the saturation of the gain medium.

    The external source pumps electrons into the conduction band (CB) and holes into the valence band (VB) of the gain medium, creating a population inversion. These carriers relax, creating an inversion at the bandgap (the creation of excitons appears to be unlikely due to the high required free carrier density). The CB ↔ VB transitions in the gain medium are coupled to the LSP excitation/annihilation transition (represented in Fig. 3c by the coupled red arrows) by near-field radiationless transitions induced by a coupling term in the Hamiltonian H′ = −dEn where d is an electronic transition dipole in the gain medium.

    A semi-classical theory of spasers, in which the gain medium is treated quantum mechanically and the SPs are treated classically, has been presented in ref. 82. A nanoscale spaser (nanospaser) has many unique and general properties due to its nature as a deeply subwavelength, quasistatic device. Note that in this case, no electromagnetic scale (wavelength, skin depth, decay length, etc.) is relevant, and spaser theory scales with the only important scale: the size of the metal nanosystem, which we will denote by R. Consequently, a spaser possesses a series of general properties, some of which make it uniquely different from micro- or macroscopic lasers.

    (i) The condition for spasing does not depend on the spaser size and is given by the following inequality83:

    $$ \frac{4\pi}{3}\frac{{\vert{{\bf{d}}}\vert}^2{n_e}Q}{\hbar {\Gamma_{12}}\varepsilon_d}\, \ge\, 1 $$ (1)

    where ne is the volume density of active electrons in the gain medium, the metal quality factor is defined as $ Q = \left| {\varepsilon _{\mathrm{m}}} \right|/{\mathrm{Im}}\varepsilon _{\mathrm{m}}$, εm is the permittivity of the metal in the spaser core at the spasing frequency, Γ12 is the spectral width of the spasing transition, and εd is the permittivity of the surrounding dielectric medium. This condition can be recast in a very simple form83 in terms of the gain, g, that the spaser gain medium must possess in the bulk, ggth, where the threshold gain is gth = k/Q, with $ k = \omega \sqrt {\varepsilon _d} /c$ being the radiation wave vector in the surrounding medium. For a good plasmonic metal of Q ~ 10–100, this spasing condition is very realistic and easy to satisfy with semiconductor or dye-gain media. Because the spasing condition (1) does not depend on the spaser size, the spaser can be made truly nanoscopic. There are several experimentally demonstrated spasers, all of them possessing a shell geometry similar to that in Fig. 3a, whose sizes are truly nanometric (from several nanometers to several tens of nanometers)36, 38, 39. The unique applications of these nanospasers enabled by their nanometer-scale sizes include their biomedical use as intracellular labels and theragnostic agents. Such applications include cancer diagnostics and therapeutics (theragnostics)38 and super-resolution (stimulated emission depletion, or STED) imaging39.

    (ii) The spasing frequency, ωs, is a linear average of the gain transition frequency, ω21, and the LSP frequency, ωp, namely,

    $$ \omega _{\mathrm{s}} = \frac{{\gamma _{\mathrm{p}}\omega _{21} + \Gamma _{12}\omega _{\mathrm{p}}}}{\gamma _{\mathrm{p}} + \Gamma _{12}} $$ (2)

    where γp is the LSP resonance width. This is identical to the frequency pulling effect in conventional lasers with detuning84, except that the cavity frequency is replaced by the plasmon frequency. The spasing frequency does not depend on the spaser size or on the pumping rate. It is generally different from both the gain-medium transition frequency, ω21, and the LSP frequency, ωp. The frequency walk-off effect is inherent to both lasers and spasers, but in the latter case, it can be very significant due to the large spectral widths involved. One of the consequences of this fact is the possibility of tuning the spasing frequency throughout the entire visible range by changing the bandgap of the semiconductor gain medium while leaving the geometry and composition of the metal core unchanged47. The fact that the nanospaser frequency (2) depends only on the spaser shape and material composition but not on its size makes a nanospaser an outstanding frequency-based sensor of its dielectric environment. It is also uniquely sensitive to an extremely small amount of analyte due to its nanoscopic modal volume.

    (iii) For a nanospaser, the spontaneous decay rate, γ2, of the gain-medium excitation into the LSP spasing mode is plasmonically enhanced and can be expressed for a nanoshell spaser82 as follows:

    $$ \gamma _2 = \frac{{2|{\bf{d}}|^2}}{{\hbar \varepsilon _{\mathrm{d}}\varepsilon _{\mathrm{m}}^\prime \varepsilon _{\mathrm{m}^\prime}^\prime R^3}} $$ (3)

    where $ \varepsilon _{\mathrm{m}}^\prime = {\mathrm{Re}}\varepsilon _{\mathrm{m}}$, $ \varepsilon _{\mathrm{m}^\prime}^\prime = I{{m}}\varepsilon _{\mathrm{m}}$, and R is the nanoshell radius. An estimate with silver as a metal in the red spectral region and realistic parameters, d = 15 D and R = 5 nm, yields γ2 ≈ 5ps−1 82. This rate exceeds the rates of other decay channels in the gain medium. This implies that the injection of a carrier into the CB of the gain medium leads to a spontaneous emission of an SP in the metal core, and as a result, NpIp, where Np is the SP population of the spasing mode and Ip is the rate of pumping. In such a case, the rate of radiation of the spaser, Ir, as a function of the pumping rate (the so-called L–L curve) is linear even for a very small Ip, far below the spasing threshold. Above the spasing threshold, the emission rate is increased by a factor of Np, and the L–L curve is always a straight line as a function of Ip. Thus, the spasing threshold is imperceptible in the L–L curve. Because γ2R−3, as seen in Eq. (3), such an "ultralow threshold" or "thresholdless" behavior always occurs for sufficiently small nanospasers. Such behavior has been demonstrated in a number of experiments; see, e.g., ref. 47.

    (iv) Above the spasing threshold, SP emission is stimulated, and its emission rate can be estimated to increase with the pumping intensity Ip as $ \gamma _2^{\left( {{\mathrm{st}}} \right)}{\mathrm{\sim }}\gamma _2N_{\mathrm{p}} \propto I_{\mathrm{p}}$. Because Np scales as ∝R3, the generated spaser relaxation rate, $ \left( {\gamma _2^{\left( {{\mathrm{st}}} \right)}} \right)^{ - 1}$, does not depend on R and is proportional to the pumping rate. Hence, a nanospaser can be used for direct modulation with a maximum frequency of ~5 THz that increases with pumping; it can also be used to generate ultrafast pulses with a duration of < 100 fs (see the theory in ref. 82). Experimental evidence indicates that the direct modulation rate of a spaser can exceed 1 THz and that the pulses generated can be shorter than 0.8 ps85.

    (v) The absence of a perceptible threshold in the L–L line, Ir(Ip) or Np(Ip), does not imply that there actually is no threshold for coherent generation, as has been discussed elsewhere86, 87. A finite threshold still exists, and it can be determined from the second-order autocorrelation function of the spaser radiation, g(2)(τ). This function is conventionally defined as

    $$ g^{(2)}\left( \tau \right) = \frac{{\left\langle {P\left( {t + \tau } \right)P\left( t \right)} \right\rangle }}{{\left\langle {P\left( t \right)} \right\rangle ^2}} $$ (4)

    where P(t) is the probability of detecting a photon from the spaser at time t and τ is the time delay between the detection of two consecutive photons. This function is normalized such that g(2)(τ) → 1 for τ → ∞. Such higher-order correlation functions are conventionally used to characterize the statistics of photons emitted by various sources84, 88.

    Below the spasing threshold, the local and emitted fields of a spaser possess random statistics. In the extreme limit of Gaussian statistics, g(2)(τ) → 2 for τ → 0. Generally, below the threshold, one expects 2 ≥ g(2)(0) > 1. Immediately above the threshold, the spaser generation statistics change, and for pumping intensities at this threshold and higher, we have g(2)(τ) → 1 for all τ. Such threshold behavior is characteristic of lasers generating emission in a single mode88. For a nanospaser, this behavior has been convincingly demonstrated in experiments46, 47. Note that such behavior corresponds to a non-equilibrium phase transition above which the local fields around the spaser become coherent and large, in contrast to the case of spontaneous SP emission.

Physical motivations for small lasers
  • Even with all the remarkable progress in laser technology achieved over the last 60 years, the spatial concentration of laser radiation is still limited to a half-wavelength, i.e., a distance of ~1 μm, due to the wave nature of optical radiation. However, there are a large range of objects and phenomena at the nanoscale that represent a realm of significant fundamental and applied interest, as envisioned by Feynman89. Among them, natural objects such as subcellular structures and biological macromolecules, with sizes on the order of 10 nm, and engineering structures such as transistors, with sizes even below 10 nm, stand out. Therefore, coherent sources at corresponding optical frequencies have great fundamental and applied significance.

    Obviously, photons, which are the quanta of electromagnetic fields, cannot be compressed to sizes much less than the diffraction limit, which is on the order of the wavelength, $ \frac{{2\pi c}}{{\omega \sqrt \varepsilon }}$, where c is the speed of light in vacuum, ω is the optical frequency, and ε is the permittivity of the medium. This size, even for highly polarizable dielectrics with ε ~ 10, is still on the order of hundreds of nanometers, being one or more orders of magnitude greater than our target size of 10 nm. The use of plasmonic nanoparticles and pointed probes to concentrate optical energy due to plasmonic resonance enhancement and geometric concentration is a successful approach for nanoscopy, nanospectroscopy, and nanoscale detection and sensing90-93.

    Despite all this progress, a coherent nanoscale optical source is still highly desirable and promising. The idea of such a nanosource is that the photons in a laser are, in a sense, coincidental. The general properties that a field's quanta must satisfy to be suitable for coherent quantum generation, which photons do satisfy, are as follows: (i) bosonic statistics, which are needed to coherently accumulate a significant number of such quanta in a single state (mode); (ii) high linearity or harmonicity, which provides the possibility of accumulating such quanta and achieving a high field amplitude without a significant nonlinear (anharmonic) frequency shift ("chirp") or deterioration of the quality factor of the resonance; and (iii) electroneutrality, which is necessary because otherwise, the accumulation of N quanta would cause an increase in their Coulomb energy scaling as ∝N, which would be unsustainable for N $ \gg $ 1.

    These properties are all satisfied by surface plasmons (SPs)—both LSPs and SPPs92. LSPs are fundamentally, by far, the most strongly localized optical-frequency quanta94. The reason is that the modal field potential of an LSP, φn(r), satisfies the quasistatic equation

    $$ \frac{\partial }{{\partial {\bf{r}}}}\theta \left( {\bf{r}} \right)\frac{\partial }{{\partial {\bf{r}}}}\varphi _n\left( {\bf{r}} \right) - s_n\frac{{\partial ^2}}{{\partial {\bf{r}}^2}}\varphi _n\left( {\bf{r}} \right) = 0 $$ (5)

    Here, we assume that the system consists of two components—a metal and a dielectric—and that θ(r) is a characteristic function that is equal to 1 in the metal and 0 in the dielectric94; 1 > sn > 0 is an eigenvalue, and φn(r) is the corresponding eigenfunction; and homogeneous Dirichlet–Neumann boundary conditions hold. This equation does not possess any spatial scale except that defined by θ(r), implying that the LSPs are localized at the minimum scale of the metal nanoparticles constituting the system, which is assumed to be nanometric.

    The LSPs defined by Eq. (5) obviously satisfy the three requirements formulated above: (i) Their modal field is a vector, $ {\bf{E}}_n\left( {\bf{r}} \right) = - \frac{\partial }{{\partial {\bf{r}}}}\varphi _n\left( {\bf{r}} \right)$; consequently, they are of spin 1 and are bosons, in accordance with the Pauli theorem95. (ii) They are electroneutral, as follows from Eq. (5). (iii) LSPs are known to be highly harmonic due to their nature as collective excitations of a large number of electrons. The same properties are true of SPPs, except that they are propagating waves and, consequently, delocalized compared to LSPs. In addition, SPs interact with charges via their modal electric fields En(r) just as photons do. Consequently, SPs can potentially be used instead of photons for quantum amplification and generation. A fundamental advantage of using SPs in lieu of photons is that they are nanoscopic by their localization scale. This idea of nanoscale spaser has been introduced in ref. 33; see also refs. 82, 96-99.

  • One of the original motivations for laser miniaturization was to reduce power consumption, which can be realized by simply reducing the physical volume of the gain material69. In the 1990s, Purcell's effect was extensively explored to control the spontaneous emission rate and, thereby, the spontaneous emission coupling factor(β)100-102 through various methods of laser size reduction. A laser's photon production, by means of either optical or electrical pumping, is shared between the available optical modes—the more optical modes there are, the higher the pump rate required to achieve the lasing threshold. The advantage thus comes from reducing the number of optical modes, Nm, by using small optical cavities: this simply enables a higher proportion of spontaneous emission to seed the laser modes. To a first-order approximation, under the assumption that each optical mode competes equally for emission, the fraction of spontaneous emission, β, into a single laser mode is $ \beta \sim N_{\mathrm{m}}^{ - 1}$. This concept inspired intense research aimed at creating the smallest possible lasers to achieve "thresholdless lasers" emitting almost no spontaneous emission103.

    Because the stimulated emission needs to dominate in the lasing state, the lasing threshold can sometimes be defined intuitively as the condition in which the rates of spontaneous and stimulated emission into the laser mode are equal37. According to Einstein's 1916 paper on spontaneous and stimulated emission coefficients, this condition is equivalent to saying that a lasing mode should contain one photon to reach the threshold104. Hence, for a given cavity loss rate, γ, the minimum power needed to maintain a single photon in the lasing mode is $ \gamma \times h\upsilon \times \frac{1}{\beta }$, where is the energy of that single photon. The total threshold power should also include the power needed to pump and maintain the carriers at the upper energy level for population inversion. The minimum power needed to maintain population inversion is γSP × E21 × V × ntr, where γSP is the spontaneous emission rate, E21 is the energy required to pump carriers into the excited energy level (~), and V and ntr are the physical volume and transparency carrier density, respectively, of the gain material.

    An analysis of the rate equations yields the same physical picture, from which we can obtain the following normalized threshold pump rate, Rth, for either photons or electrons37:

    $$ R_{{\mathrm{th}}} = \gamma \left( {1 + \beta ^{ - 1}} \right)\left( {1 + \zeta ^{ - 1}} \right)/2 $$ (6)

    where ζ = γ/αg, with αg being the loss due to the gain material. There is a useful symmetry to this threshold definition: $ \beta \propto N_{\mathrm{m}}^{ - 1}$ quantifies how the pump energy is divided amongst a device's optical modes, and ζ ∝ (V × ntr)−1 quantifies the energy overhead for achieving population inversion. Note that ζ is unbounded—for example, the operation of a laser is typically dominated by cavity loss (ζ → ∞) for a "4-level" gain material. The threshold is minimized in cases where β → 1 and ζ → ∞, such that Rthγ. Here, the minimum pump rate is exactly the rate at which photons are being lost from the cavity mode. Under this definition, thresholdless lasing is not physically possible.

  • One of the important features of plasmonic lasers is their potential for ultrafast modulation. The spatial and spectral localization of nanocavity modes leads to modified dynamics due to the enhanced interactions between the gain medium and the cavity mode, i.e., the same Purcell effect105 mentioned above. The Purcell effect changes the natural spontaneous emission lifetime, τ0, by the Purcell factor, F = τ0/τ, where τ is the modified lifetime. The accelerated spontaneous emission into lasing modes enables nanolasers to have ultrafast responses106. Theoretical studies and numerical simulations have shown that nanolasers can be modulated at 100s GHz or even up to THz107-113. Recently, a nanolaser emitting sub-picosecond pulses has been experimentally demonstrated85.

    Beyond the Purcell factor, accelerated laser dynamics modify the interactions between the gain material and the available optical modes. Some optical modes may couple preferentially to the gain material, while others could be suppressed. For the nth optical mode, the corresponding modal spontaneous emission lifetime is τn. The total Purcell factor is a sum over the modal Purcell factors, $ F = \tau _0\tau ^{ - 1} = {\sum \nolimits_n} {\tau _0\tau _n^{ - 1}} ={\sum \nolimits_n} {F_n}$. The effect on stimulated emission is two-fold: first, all light-matter interactions within the gain medium are accelerated, including stimulated emission; second, the modal spontaneous emission factors are modified, such that for the nth mode, βn = Fn/F. This, in turn, modifies the lasing threshold for a particular mode. An increased β-factor further accelerates the temporal response under direct laser modulation69, 82, 107-113. Accessing high Purcell factors through high-cavity quality is not valid when the cavity resonance is narrower than the inhomogeneously broadened emission linewidth. Furthermore, it is not necessarily advantageous for laser performance. For example, long photon lifetimes limit the modulation bandwidth of a laser108.

    One of the related issues with short carrier lifetimes is the validity of the rate equation approximations113. The complete set of Maxwell–Bloch equations describing a semiconductor laser includes coupled rate equations for photons and the population as well as the medium polarization equation. Due to the typically short nature of the polarization lifetime (sub-ps) compared to the carrier lifetime (~1 ns), only the photon and population rate equations remain, whereas the polarization equation may be adiabatically eliminated. For a plasmonic nanolaser, however, this approximation becomes questionable due to the greatly enhanced spontaneous emission rate, which could make the carrier lifetime more similar to the polarization lifetime. Therefore, the ultrafast modulation of plasmonic nanolasers, in general, cannot be analyzed based on the conventional rate equations alone. The validity of the rate equations was recently studied113 together with an analysis of the modulation of plasmonic nanolasers using a more complete set of equations beyond the rate equation approximation. Although there have been extensive theoretical studies, a systematic experimental investigation of plasmonic nanolasers is still lacking, with only a limited number of papers having been published on this topic. The operation of plasmonic nanolasers under direct current modulation has not been demonstrated. Many theoretical predictions have not been experimentally validated. Other aspects of modulation related to size and energy efficiency have been discussed more extensively elsewhere69.

  • One of the important issues for plasmonic nanolasers is to overcome the metal loss by means of optical gain. Since it is known that the typical semiconductor gain is on the order of 103–104 cm−1 (the material gain), whereas the absorption of a metal can be as large as 106 cm1, it seems to be impossible to ever overcome the metal absorption when an SPP mode is propagating at a semiconductor-metal interface, where the mode exists partially on both sides. One of the interesting features of the propagation of a surface plasmonic mode is the dramatic slowing down of the energy flux and its consequences for the optical gain experienced by the mode, the so-called modal gain. This leads to an unusual property of the modal confinement factor114, which can be several orders of magnitude larger than unity, which is conventionally thought to be the upper limit in weakly guided situations. A fortunate coincidence is that, at the interface between a semiconductor and a metal, the confinement factor for the metallic region is approximately two orders of magnitude smaller than that of the semiconductor region. The former defines the modal loss, whereas the latter defines the modal gain114, 115. This fortunate coincidence makes it possible to achieve an overall net gain, despite the fact that the material loss in metals is larger than the material gain in semiconductors. This is the reason for the existence of a giant optical gain116 in surface plasmonic modes, which leads to the counterintuitive but beneficial situation of a larger optical modal gain with metal than without. The plasmonic resonant slowing down of the energy propagation leads to an interesting role of the metal, namely, enhancement near the resonance: just as a metal can enhance plasmonic absorption, it can also enhance plasmonic gain. It is important to note that the definition of the confinement factor needs to be modified in a waveguide or cavity with strong confinement, such as in a plasmonic nanolaser114, 115.

    Another exciting realization is the beneficial role played by metals in small lasers despite the metal loss. The overall cavity Q is determined by the internal absorption and the far-field radiation loss, as given by 1/Q = 1/Qa + 1/Qr, where Qa and Qr are the individual Q-factors determined by the internal absorption and far-field radiation, respectively. For a small laser, the advantage of the reduction of the far-field radiation can overcome the increased metal loss to enable an overall larger Q with metal80, or a lower threshold.

Development of spasers and plasmonic nanolasers
  • Plasmonic devices use free electron oscillations to store electromagnetic energy and thereby can manipulate light beyond the optical diffraction limit. However, the essential field confinement capability of plasmonics is always accompanied by parasitic ohmic loss, which, in most situations, severely degrades the device performance. This led to the proposal of plasmonic amplifiers33. The technical challenges in realizing such devices were high. Despite widespread initial skepticism, the first reports of plasmonic lasers emerged34-36 6 years later. The first semiconductor-based plasmonic nanolasers were operated at cryogenic temperatures and with high thresholds of 10–200 MW cm−2. The first room-temperature spaser with molecular gain had a threshold approaching 10 GW cm−2. In 2011, using single-crystalline semiconductor nano-squares and the total internal reflection of surface plasmons, semiconductor-based room-temperature plasmonic nanolasers were demonstrated; however, the problem of the high operation threshold of plasmonic nanolasers still was not solved. The device in ref. 40 was pumped by a femtosecond laser and had a threshold on the order of GW cm−2.

    Immediately following these early demonstrations, the inherent ohmic losses and high thresholds of the demonstrated devices led to a debate about whether metals could really enhance the performance of lasers. Continuous efforts to optimize the materials and laser configuration helped to lower the thresholds of plasmonic nanolasers down to ~kW cm−2 at cryogenic temperatures46, 117 and to the range of 1–100 MW cm−2 at room temperature43, 118. However, these room-temperature thresholds were still 2–4 orders of magnitude higher than those of commercial laser diodes. In 2014, a concern was raised regarding whether metallic cavities could provide any advantage in laser construction at all119. It was pointed out that the threshold density of a spaser cannot be lowered below MW cm2 with practically available plasmonic materials. Notably, this limit of MW cm−2 is approximately the threshold density for a laser with a diameter of only ~10 nm.

    Despite the high losses, reasonable lasing threshold values are achieved when favorable values of both β and ζ are possible120. Higher β values emerge naturally from smaller plasmonic lasers. However, an increase of ζV−1 is also possible as the volume of the gain material is reduced. For example, the smallest spasers, utilizing the molecular gain around spherical gold nanoparticles, operate with ζ ~ 1 and β ~ 1. With resonator loss rates approaching a massive 1014 s−1, these devices are possible only due to the aforementioned threshold reduction phenomena. Such spasers extend the laser phenomenon to its limits and generally require pulsed operation to avoid thermal damage to the devices.

    In 2017, room-temperature plasmonic nanolasers with a low threshold on the order of 10 kW cm−2, which corresponds to a pump density in the range of modern laser diodes, were reported120. More importantly, in the same work, scaling laws for the key parameters of plasmonic and photonic nanolasers were reported, including the physical dimensions, threshold, power consumption, and lifetime (Fig. 4). These parameters were analyzed to identify a set of laws that dictate how these parameters scale against each other. These scaling laws suggest that plasmonic lasers can be more compact and faster with lower power consumption than photonic nanolasers when the cavity size approaches or surpasses the diffraction limit. These results clarified the long-standing debate over the viability of plasmonics in laser technology and identified situations in which plasmonic lasers have clear practical advantages. Most recently, an experiment suggested that the threshold of a plasmonic laser can be lowered to 70 W cm−2 via a combination of a lattice plasmonic cavity and an upconverting nanoparticle gain material121.

    Fig. 4  Comparison between plasmonic nanolasers and photonic nanolasers120.

    a In total, 170 plasmonic nanolasers (top) and photonic nanolasers (bottom) were measured for comparison, each with the same gain material and cavity feedback mechanism. be Comparisons of cavity size (b), spontaneous emission lifetime (c), threshold (d) and power consumption (e). These comparisons suggest that plasmonic lasers can be more compact and faster with lower power consumption than photonic nanolasers when the cavity size approaches or surpasses the diffraction limit.

    For a laser with a β much smaller than 1, the threshold can be easily defined as a kink in the light–light curve on a linear scale. However, this kink will vanish as β approaches 186. The issue of the lasing threshold has once again become a focus of discussion with the emergence of nanolasers with β ~ 1. The lasing threshold has been an important issue of discussion from the very early days of lasers. The initial question was whether the threshold simply means a more dramatic increase in the laser intensity or the number of photons. It soon became clear84, first from a theoretical study and later through experimental demonstration that the more distinctive characteristic of the lasing threshold lies not in the laser intensity but in the photon statistics. The lasing threshold is more fundamentally characterized by a change in the equal-time intensity correlation (or second-order correlation) function g2(0) (Eq. (4)), from 2 for spontaneous emission to 1 for emission in the coherent state. Despite this clear general understanding, the issue later resurfaced, first during the development of micro-cavity lasers122. Plasmonic nanolasers provided an opportunity for the second revival of this debate with the fabrication of nanolasers with β truly approaching 165. This revival prompted renewed interest in re-examining the issue of the lasing threshold. Various interesting aspects of the lasing threshold were revealed, especially for devices in which the spontaneous emission factor is close to unity87. It is clear now that a light-emitting device with a unity spontaneous emission factor does not become a laser at zero pumping. The absence of an intensity kink does not imply a threshold of zero for a nanolaser, as we discussed earlier in this paper. Finite pumping is always required even when the spontaneous emission factor is unity. In fact, the transition in g2(0) from larger than 1 to 1 becomes much softer, and it may take very high pumping for g2(0) to eventually approach 1 when β = 1. An LED gradually becomes more like a laser with increased pumping. The sharp threshold seen in a larger laser now becomes a range of pumping values in which g2(0) slowly approaches unity. The device may be thresholdless in the sense of the absence of a sharp kink, but it definitely does not become a laser at zero pumping. This scenario raises an interesting question: what is the quantitative definition of a laser, or how close to 1 must g2(0) be for a device to qualify as a laser? More complete and up-to-date discussions of the threshold issue for high-β micro- and nanolasers have been presented from both theoretical and experimental perspectives by Chow and Reitzenstein123.

  • Optical pumping has played an important role in proof-of-concept studies and in revealing basic physical effects. However, for certain applications, electrical injection is necessary, especially for semiconductor-based nanolasers with intended applications in integrated photonic circuits. Electrical injection in plasmonic nanolasers presents both interesting opportunities and challenges80. It is both convenient and practical to use the same metal both for plasmonic confinement and as the contacts for electrical injection, as in the original design70, 124-126. The challenges involve the increased degree of difficulty in the fabrication of high-quality metallic structures with small features. There are also intrinsic issues related to the increased contact resistance for smaller structures127, 128. For electrically injected plasmonic lasers, approaches involving traditional III–V fabrication techniques seem to be more feasible27, 34, 70, 124-126.

    Figure 5 presents major progress in electrically injected metallic cavity nanolasers, from the first demonstration of a metal-encased cavity operating in dielectric mode (Fig. 5a) and the first operation in plasmonic gap mode (Fig. 5b) to subsequent efforts to increase the operation temperature of electrically injected nanolasers. It is important to note that all but one (Fig. 5b) of these lasers work in dielectric modes. More extensive research and optimization are needed for device configurations for electrical injection beyond the current approaches8, 65, 70, 80, 124-126, 129, 130. Another challenge for electrical injection for eventual high-speed applications is to minimize the RC delay, which will require careful design to avoid the occurrence of large capacitance due to the plasmonic or contact metals.

    Fig. 5  Development of electrically injected plasmonic and metallic cavity nanolasers.

    LT: low temperature; RT: room temperature. a First electrically injected metallic cavity nanolaser operating in dielectric mode27. b First electrically injected nanolaser operating in metaldielectric-metal plasmonic gap mode34. c, d Nanolasers operating above liquid nitrogen temperature129, 130. e, f Demonstrations of the first room-temperature operation of electrically injected metallic cavity nanolasers66, 125. Notice that except in b, all of these metallic cavity lasers operate in dielectric modes.
  • Room-temperature operation is a requirement for many practical applications and is typically a milestone in the development of any new type of laser. For plasmonic nanolasers, room-temperature operation represents an even larger challenge due to the severe plasmonic heating. It was completely unclear from the outset whether plasmonic nanolasers would ever be able to operate at room temperature. One of the earliest demonstrations of room-temperature operation was presented by Ma et al.40 using a semiconductor nano-square coupled with silver film under optical pumping. For a device operating under electrical injection, it was a much longer process from the initial demonstration at 10 K24 to 260 K129 and, eventually, to room temperature66, 125. It is important to note that room-temperature operation under electrical injection has been demonstrated for dielectric modes, not for plasmonic modes. Therefore, strictly speaking, plasmonic nanolasers operating under electrical injection have not yet been realized at room temperature. Both innovative designs and systematic efforts will be needed to achieve lasing in plasmonic modes under electrical injection at room temperature.

  • The inevitable metallic absorption loss in plasmonic nanolasers converts the input power into heat rather than radiation, leading to an undesired low external quantum efficiency (EQE) and device degradation. Any characterization of the quantum efficiency of a plasmonic nanolaser should consider its near-field surface plasmon emissions, divergent emission profile, and limited emission power. In 2018, a method of characterizing the external quantum efficiency of plasmonic nanolasers was developed by combining experimental measurements and theoretical calculations131. Through systematic device optimization, high-performance plasmonic nanolasers with an external quantum efficiency exceeding 10% were demonstrated at room temperature. The EQE of plasmonic nanolasers can be further increased by accelerating their radiation rate by employing a smaller cavity with a lower radiation quality factor, for which optimizations in terms of cavity configuration and metal quality are crucial. A higher EQE can also be realized by coupling a plasmonic nanolaser to an embedded or adjacently integrated waveguide41, 126. Through waveguide coupling, the emission directionality of plasmonic nanolasers can also be recovered41.

  • In contrast to conventional lasers, a plasmonic nanolaser (spaser) amplifies surface plasmons instead of propagating photons, providing amplification of light localized at a scale smaller than the diffraction limit. Therefore, the surface plasmon "emission" of a plasmonic nanolaser is considered to be "dark", if it does not couple to the far-field (Fig. 6). In 2017, the surface plasmon emission of plasmonic nanolasers was directly and simultaneously imaged in the spatial, momentum, and frequency spaces using leakage radiation microscopy132. The results showed that a plasmonic nanolaser can serve as a pure surface plasmon generator, with nearly 100% of its emission radiating into the propagating surface plasmon mode outside of the cavity. Experimentally, a nanowire plasmonic nanolaser was fabricated, and ~74% of its total emission radiated into the propagating surface plasmon mode outside of the cavity (Fig. 6).

    Fig. 6  Dark emission of plasmonic nanolasers132.

    a Schematic of the radiation of a plasmonic nanolaser based on a metal-insulator-semiconductor gap mode, which consists of free-space photon radiation and SPP dark emission. b Surface plasmon generation efficiencies of nanowire plasmonic nanolasers with various diameters operating in the fundamental plasmonic mode. c, d Real-space (c) and momentum-space (d) images of plasmonic nanolaser emission obtained via leakage radiation microscopy. The white polygon in c indicates the profile of the nanolaser.
  • The eigenmode of a nanolaser with a high β can be engineered in a controllable manner for novel inner laser cavity field and/or emission beam synthesis. Recently, a new class of lasers based on concepts borrowed from parity-time symmetry in quantum mechanics has emerged133. A recent study indicates that a parity-time-symmetric synthetic plasmonic nanocavity can be employed to construct a vortex nanolaser134. When a single dipole emitter interacts with such a nanocavity, a counterintuitive phenomenon emerges in which the radiation field of the dipole can display the opposite handedness to the coalesced eigenstate of the system at an exceptional point, which violates the conventional wisdom that an emitter radiates into and interacts with eigenstates of the photonic environment134. Furthermore, ensembles of nanolasers operating in unison can produce a macroscopic response that would not be possible in conventional lasers. In this case, it is the structure at the nanoscale that determines a laser's operational characteristics, in a manner similar to a metamaterial. In the near-field, the polarization and profile of each nanolaser eigenmode can be controlled, with additional control over the ensemble through coupling, relative phase, eigenmode symmetry and topology. Such cooperative eigenmode engineering is distinct from that for photonic crystal lasers, for which periodicity is the main control parameter, and could enable unprecedented control of macroscopic laser fields, with a range of far-field applications135-137.

  • A single-particle plasmonic nanocavity is of immense interest due to the potential to reach extremely small mode volumes and ultrahigh Purcell factors. Immersing a single nanoparticle in a gain medium can lead to the smallest laser device, a spaser. Inspired by this concept33, many groups have presented experimental demonstrations of spasing action, including the use of plasmonic nanoparticles36 as well as waveguides34, 35. The first report on single-particle spasers demonstrated a gold nanoparticle core serving as the feedback plasmon nanocavity coated with a shell of organic dye-doped silica36. Figure 7a depicts this ultracompact spasing system, with a gold-core diameter of 14 nm and a shell diameter of 44 nm, as further detailed in Fig. 7b. This original experiment has been followed by others with an eye towards improving the design and addressing the initial limitations, such as a lack of directionality138, a lack of spaser wavelength tuneability139, and the need for a high threshold to overcome the material losses in the visible region140. Accordingly, directionality in single-particle spasers has been achieved by breaking the symmetry of the core-shell structure138 (Fig. 7c). Utilizing a metal-semishell-capped spaser instead of a closed metal shell design enabled the spasing emission to be directed towards a preferred direction (Fig. 7d) independently of the polarization and incidence angle of the pump. This metal-semishell resonator spaser can also improve the power efficiency of the original design by minimizing undesired radiation. Figure 7e depicts a different spaser structure used to achieve wavelength tuneability139. This structure consists of a gold nanorod coated with a monolayer of mesoporous silica as a single-particle plasmonic nanocavity and organic laser dyes as optical gain media. This design provides more efficient energy transfer from the gain material to the gold nanorods due to the ability to encapsulate the optical gain inclusions inside the mesoscopic pores of the silica shell. Figure 7f demonstrates that by adjusting the doping level of the dye, the spaser emission wavelength can be tuned from 562 to 627 nm. Other limitations, such as the high threshold required to compensate for material loss and the short lasing lifetime, have been addressed through the engineering of the triplet state in a three-level system140. This three-level spaser utilizes a structure very similar to that of the original single-particle spaser, as shown in Fig. 7g. In addition, the spasing threshold and dynamics in the new spaser can be tuned by engineering the energy levels of the gain medium and the energy transfer process. The three-level spaser demonstrates a low threshold of 1 mJ cm−2 (Fig. 7h). The mean-field chromophore interaction is included through a field- and position-dependent dielectric function with gain saturation. However, more complex cooperative effects141, 142 have been intentionally omitted, as they should be smeared out by strong dephasing and random dipole orientations. A recent study143 has confirmed that for tens of thousands of randomly oriented molecules, the ensemble-averaged dipole–dipole coupling should vanish, and the resonant mode should remain unaffected.

    Fig. 7  Single-particle spasers.

    a A schematic of a single-particle spaser design involving a gold core covered by a silica shell doped with an organic dye (Oregon Green 488)36. b Scanning electron microscope image of spaser nanoparticles36. c Radiation from a metal-semishell-capped spaser. The silver semishell generates feedback with localized surface plasmons, whereas the porous silica core provides optical gain138. d A polar plot of the power flow from the spaser featured in c at different angles of incidence138. e A spaser design consisting of a gold nanorod covered with an organic dye-gain material embedded in a mesoporous silica shell139. f The spontaneous emission (SE) and amplified spontaneous emission (ASE) from the spaser system in e with different dye concentrations. Each spectrum is normalized to the peak of the spaser emission139. g A schematic of a core-shell spaser with a gold core covered by a three-level dye system embedded in a silica shell140. h The evolution of the full width at half maximum (FWHM) (blue) and emission intensity (red) of the spaser in g vs. the pump energy140.
  • Some of the limitations encountered with single-particle spasers are inherent to their design, and therefore, a different spaser system would be required to overcome these challenges. A single-particle spaser has a single source of feedback, which limits the quality factor of the resonator. The structural engineering of arrays of plasmonic resonators has been applied to address the high radiative losses and poor directionality of spasers54, 74, 75, 144-146. It was proposed in 2008 that the arrangement of plasmonic particles in a two-dimensional array would lead to interactions between the individual plasmonic elements, giving rise to a high-quality-factor collective SPP resonance144. This type of quantum generator is called a lasing spaser144, 147. Such a spaser is a periodic array of individual spasers that interact in the near-field to form a coherent collective mode. Such lasing spasers are built of plasmonic crystals that incorporate gain media. One type of lasing spaser is a periodic array of holes in a plasmonic metal film deposited on a semiconductor gain medium75, and another type is a periodic array of metal nanoparticles surrounded by a solution of dye molecules74. Once such an array is brought in contact with a gain medium, the radiation losses and Joule losses in the metal can be compensated, and above a certain gain threshold, the array will begin spasing. In the plane of the array, the strongly trapped current modes in the plasmonic resonators oscillate in phase, leading to spasing emission in the normal direction, as depicted in Fig. 8a. A critical step in the experimental realization of spaser arrays was the incorporation of a gain material into the high-local-field areas of a negative-index metamaterial (NIM). That localized embedding of the gain material enabled the experimental demonstration of an extraordinarily low-loss active optical NIM in the visible wavelength range between 722 and 738 nm. With loss compensation, the original loss-limited negative refractive index was drastically improved. Thus, at a wavelength of 737 nm, the negative refractive index was enhanced from −0.66 to −1.017145.

    Fig. 8  Spasers consisting of arrays of plasmonic nanoparticles.

    a Proposal of a two-dimensional arrangement of resonators to achieve a directional spaser array144. b A plasmonic array of bowtie nanoantennas covered with an organic gain material54. c Strongly coupled plasmonic nanocavity array74. d Periodic nanohole spaser array covered with an organic dye-gain medium146. e Low-threshold plasmon–exciton–polariton spaser obtained with an array of silver nanoparticles151.

    Further experimental demonstrations followed, showcasing spasing action in arrays of coupled plasmonic nanoparticles54, 74 (Fig. 8b, c) and nanoholes in plasmonic films75, 146 (Fig. 8d). As predicted, such spaser nanoparticle and nanohole arrays have demonstrated directional emission and lower thresholds than single-particle spasers due to the higher quality factors of the resonances. Superlattices of plasmonic arrays have been structured to access multiple band-edge modes, leading to multi-modal lasing at arbitrary wavelengths77. Other exciting developments in spaser arrays have included new material platforms. For example, a high-loss ferromagnetic plasmonic material has been employed for tuneable multi-modal lasing spaser arrays148, whereas broadband lasing feedback has been achieved using a hyperbolic metamaterial relying on a large photonic density of states149. In addition, the tuneability of the spasing wavelength using a stretchable spaser array for mechanical modulation of the spaser feedback has been demonstrated78, as well as real-time tuning of the spaser wavelength through modification of the refractive index of the gain material150. The spaser concept has recently been extended to polariton lasers through the strong coupling between dye excitons and plasmonic modes in a plasmonic array (Fig. 8e). The resulting plasmon–exciton-polariton spaser array exhibits laser-like emission at a significantly lower pump threshold than in conventional spasers151.

    A recently proposed topological lasing spaser was built of a honeycomb plasmonic crystal consisting of silver nanoshells with a gain medium inside135. The generating modes of such a spaser are LSPs with chiral topological charges of m = ±1. This difference in the charges topologically protects them against mixing: only one of the m = ±1 topologically charged modes can be generated at a time, as selected by the spontaneous breaking of time-reversal ($ {\cal{T}}$) symmetry.

    We anticipate that spasers will have a central role in future on-chip integrated technologies due to their ability to generate coherent fields at the nanoscale. Future developments of spasers will include electrically driven spasers that can out-couple their emission into the modes of plasmonic waveguides. In addition, the optimization of spasers compatible with CMOS materials will be essential for their adoption in more applications as well as their commercialization.

  • The exceptional properties of single-particle spasers are potentially crucial to a large number of applications, especially sensing and imaging. Single-particle spasers have great advantages as luminescent probes38. Spasers can serve as ultrabright biocompatible biological probes. The ability to produce stimulated emission directly inside living cells has been achieved38 with a gold-core silica shell single-particle spaser, acting as a much brighter probe than conventional ones. The ability to reduce the spasing threshold and increase the spasing lifetime would make spasers highly efficient advanced luminescent probes. Among the applications that have been demonstrated as proofs of principle, we mention applications in sensing and detection in particular42, 44, 71, which are fundamentally based on the abovementioned fact that the spasing frequency depends on the geometry and composition of the spaser (Eq. (2)) and rather weakly, if at all, on the pumping and ambient temperature. A shift in a spaser indicates a change in the nano-environment close to the spaser due to the presence of the analyte. It has been shown42, 44, 71 that nanolasers built of nanorods over metal are very sensitive to minute concentrations of analytes, allowing for unprecedented detection sensitivity.

    Importantly, true nanospasers, which are nanometric in all dimensions, have the distinct advantage of being of the same order of magnitude in size as biomolecules and transistors. This attribute opens up unique and important avenues of application. One demonstrated application is in cancer therapeutics and diagnostics (theragnostics)38. To briefly discuss this application, we begin with Fig. 9, in which the spectra and geometry of the studied nanospasers are displayed. As is characteristic of spasing, the spaser emission spectra are extremely narrow, ~1 nm in width. The spaser used in the cancer theragnostics experiments was the 20-nm gold-core nanoshell spaser. The surface was functionalized to make it adhere to the surfaces of cancer cells that exhibit a large concentration of folate. The narrow spectrum and very high spectral intensity of the spaser emission enabled unprecedented confidence in the detection of cancer cells.

    Fig. 9  Structure and spectra of spasers.

    a Left: Schematic of nanoshell spaser and its function inside a living cell. The spaser consists of a gold nanosphere core surrounded by a porous silica shell impregnated with a dye (uranine). Right: Schematic of a cell and the processes accompanying pulse spasing. A pump laser pulse causes spaser generation; where stimulated optical emission occurs, a vapor bubble is formed due to heat production, and a shock wave and acoustic waves are launched. b Spectra of investigated spasers: a nanoshell with uranine dye, a nanoshell with fluorescein dye, and three gold nanorods surrounded by shells with DCM dye. For comparison, the spectrum of quantum-dot radiation is shown magnified by ×25. Electron micrographs of a 20-nm spherical spaser and a 50-nm nanorod spaser are also shown at the top. Adapted from ref. 38.

    The theragnostic use of the spaser is illustrated in Fig. 10. Living cancer cells were incubated with spasers whose surfaces were functionalized to bind with these cells. During this process, the cancer cells absorbed the spasers, which generated radiation inside the cells when pumped. Different numbers of spasers per cell can be internalized in this way depending on their concentration and the incubation time: from a single spaser, as in Fig. 10a, to a multitude of spasers, as in Fig. 10b. Spasers inside a cell as visualized by electron microscopy are shown in Fig. 10c: one can see an isolated spaser, a dimer of spasers, and an aggregate of many spasers. Note that a spaser makes an excellent fluorescent label because it is literally brighter than a million quantum dots! Spasers also makes excellent agents for photothermal imaging (Fig. 10d) because of their very high absorption cross section.

    Fig. 10  Spasers inside a cancer cell.

    a Optical micrograph of a single spaser radiating inside a cell. b Optical micrograph of multiple spasers generating radiation inside a cancer cell. c Electron micrograph (positive contrast) of multiple spasers inside a cell. A single spaser, a dimer of spasers, and a cluster of multiple spasers are clearly seen. d Photothermal image of a cell labeled with multiple spasers. e Optical micrograph showing a single spaser (marked with a white arrow) producing a surrounding vapor bubble. f Optical micrograph illustrating a mechanism of cancer therapeutics using spasers. A single spaser surrounded by a vapor bubble is indicated by a white arrow. Red arrows indicate fragments of the cell membrane due to damage caused by shock waves produced by the cavitation around the spaser. The cancer cell dies after one or a few laser pulses. Adapted from ref. 38.

    The therapeutic effect of spasers is illustrated in Fig. 10e, where with an increase in pumping, the formation of a vapor bubble around the spaser, produced by the heat released into the surrounding liquid, is clearly seen. The damage to cancer cells that is produced by spasers pumped at such levels is demonstrated in Fig. 10f, where the cell membrane is ruptured at several sites and membrane fragments can be clearly seen. This leads to the death of a cancer cell after one or several laser pulses. The mechanism of this damage is certainly not thermal: the volume of the spaser is ~103 nm3, while the volume of the cell is ~103 µm3, i.e., larger by a factor of a million, which suggests that the increase in the mean temperature of the cell during a pulse is negligible.

    The exceptional efficiency of spasers is not incidental: it is based on their fundamental photophysics as unsaturable absorbers and emitters. In spasers operating at a sufficiently high pump intensity, the SP emission is predominantly stimulated in nature, meaning that the SP population is proportional to the pumping intensity. Therefore, saturation is absent, and any deviations from a straight L–L line are due only to changes in the constituent materials. Over a very wide range of pumping intensities, spasers exhibit a linear L–L line and unsaturable behavior, causing them to show unprecedented brightness as fluorescent labels, extremely narrow spectral emission lines, and high efficiency as photothermal and photoacoustic agents38.

    A proof-of-principle demonstration of spasers as efficient agents for stimulated emission depletion (STED) super-resolution microscopy has been published recently39 (Fig. 11). STED super-resolution microscopy152, 153 is applicable to objects labeled with fluorescent dyes. Two optical pulses are applied: (i) a pumping pulse that causes population inversion, focused as close to the diffraction limit as possible, and (ii) a depletion pulse applied at a fluorescence frequency that causes stimulated emission and depletes the population inversion. This depletion pulse carries optical angular momentum and, consequently, has a donut shape in the focal plane. Due to the nonlinear nature of its interaction with the dye, the un-depleted area at the center of the "donut" is significantly smaller than the wavelength, enabling super-resolution.

    Fig. 11  Use of spasers for stimulated emission depletion (STED) super-resolution imaging.

    a Emission spectrum of the gain-medium dye (a fluorescein derivative) (red dashed line) and the spasing spectrum (solid black peak). An electron micrograph of the spasers is shown in the inset. b Optical image of radiating spaser aggregates under a confocal microscope. c The same as in b but obtained using STED super-resolution microscopy. d Confocal optical image of separated single spasers. e The same as in d but obtained using STED super-resolution microscopy. Adapted from ref. 39.

    This idea of STED is fully applicable not only to spontaneously emitting dye molecules but also to spasers, in which the second pulse depletes the population inversion and stops the spasing39. The spaser used in ref. 140. exhibits an extremely narrow spectrum of generation, as shown in Fig. 11a. The STED super-resolution imaging achieved using these spasers is remarkable, as is evident from comparing confocal images of spaser-nanoparticle aggregates (Fig. 11b) with images of the same aggregates obtained using STED (Fig. 11c). The achievement of super-resolution is even more evident from a comparison of confocal images of isolated single spasers (Fig. 11b) with corresponding STED images of the same spasers. These observations show the high promise of spaser-based STED far-field nanoscopy for applications in the biomedical field and others.

  • The new, exciting experimental studies of spasers and SPP nanolasers over the last decade have been supported by computational efforts developed to design and analyze critical performance metrics obtained under real-world conditions and other vital details of operation140, 154-162. Thus, power balance and heating have been studied to guide spaser design in terms of the allowed pumping intensities, duration, and expected output radiation and heating of the devices163. In addition, the gain threshold requirements for metallic-dielectric core-shell single-particle spasers have been theoretically derived considering the interband transitions of the metal155. These studies have shed essential light on the parameters affecting the threshold, including the resonant wavelength, the refractive index of the background host material, and the dimensions of the core and shell of the spaser. Classical electrodynamical models in which the quantum-mechanical effects of the gain medium are considered by introducing nonlinear permittivity have been initially adopted to describe spasing156, 157. Such models are capable of adequately predicting the conditions for loss compensation and the transition to the spasing regime for simplified geometries and operation regimes. However, as the designs of spaser systems are becoming more involved, full-wave numerical analyses that can unlock the temporal and spatial details of a given spaser are required. Time-domain multiphysics techniques are considered amongst the most accurate approaches for accounting for the quantum-mechanical nature of the gain and plasmonic materials, as they naturally combine nonlinear and thermal effects in computational domains with complex geometries158-162, 164, 165. In the time-domain multiphysics approach, the Maxwell equations are coupled to a multi-level model of the gain material through auxiliary differential equations (ADEs). Such multi-level atomic models enable the integration of the rich physics of the light-matter interactions in the gain materials of spasers and SPP nanolasers into time-domain schemes, allowing the electromagnetic field and carrier population in any time step to be calculated under the influence of different pump intensities158. Such models naturally incorporate diverse effects such as gain saturation and radiative and nonradiative transitions taking place in the active medium.

    Further developments of the early multi-level models have included the incorporation of pumping dynamics or the Pauli exclusion principle159, the photobleaching of a laser dye161, quantum noise160, 162, thermal management, and other intricate phenomena. It has been shown that the experiment-based kinetic parameters of gain media enable high predictive power of such multi-level atomic models for designing spasers and SPP nanolasers165.

Future perspectives on nanolasers and spasers
  • One of the most appealing aspects of plasmonic nanolasers and spasers is the significant size reduction they offer, far beyond what is possible with pure dielectric or semiconductor laser structures. Such lasers represent the first-ever opportunity to finally make lasers with sizes compatible with electronic devices. The spasers demonstrated originally had sizes of ~40 nm in diameter. Such spasers are often prepared in solution and are ideal for applications in solution-based sensing and detection. For other applications intended for information transmission in integrated photonics8, 166, devices need to be fabricated on solid substrates and operated under electrical injection. Such devices are often much larger, especially for rectangular devices in which electrical injection structures are included. Devices that work at room temperature in CW mode have sizes on the order of wavelengths in vacuum8, 80, 166. Design and simulation studies have shown66, 126 that a multi-layer structure based on traditional III–V semiconductors and fabrication technology could lead to SPP lasers as small as ten-thousandths of a wavelength cubed in vacuum. Such designs can be realized using traditional semiconductor wafers combined with the membrane transfer technique, as demonstrated recently167. Two recent demonstrations168, 169 of the effective coupling of single emitters with plasmonic bowtie structures or between a metallic sphere and a surface raise an interesting question regarding the ultimate size of a laser. In both cases, strong coupling and SPPs were observed with a Rabi splitting as large as 300 meV. It would be extremely interesting to see whether such a structure could be driven into the lasing regime and would thus represent the ultimate size miniaturization of lasers. Room-temperature operation of such devices under electrical injection would be even more exciting but may currently present significant challenges.

    Poor metal quality remains one of the most severe challenges for fabricating small nanolasers with a low threshold and high efficiency. The ideal long-term solution would be the all-epitaxial growth of semiconductors together with plasmonic structures168 (in the form of highly doped semiconductors or metals) for plasmonic confinement and contact. Such an approach would lead to simplified fabrication and high quality of the overall device structures. Another potentially promising approach is related to the 2D flat materials that are currently emerging170, including semiconductor gain materials and metallic materials. These 2D flat materials are ideal for plasmonic coupling with controlled separation between the gain and metallic layers, offering single-crystal quality of 2D metals. Plasmonic coupling and enhanced 2D emission have been demonstrated171-174, as well as optical gain175, 176 and lasing based on such 2D materials177-179 using regular nanophotonic cavities. Integrated SPP laser structures based entirely on 2D materials, including 2D semiconductor, dielectric, and metallic layers, could potentially lead to the smallest possible plasmonic lasers, with many advantages.

  • To decrease the threshold and power consumption, smaller devices with only a few optical modes are highly desirable. Under these conditions, spontaneous and stimulated emission are restricted to a small subset of modes that couple strongly to the gain material. In the case of strong coupling, this can lead to hybrid states of light and matter known as polaritons180, as previously discussed. As these hybrid exciton states strongly interact with each other, they can attain near-thermal equilibrium conditions; thus, under stimulated scattering, polaritons may condense, akin to the formation of a Bose–Einstein condensate (BEC)181-184. The emergence of thermal equilibrium in the stimulated emission process enables an additional degree of control over the optical modes.

    Even in the weak coupling regime between light and matter, thermal equilibrium is also achievable185-190. This phenomenon occurs naturally in optical cavities where ζ ≤ 1: this naturally promotes photon absorption and re-emission, and via the gain material's phonons, the light within the cavity can attain thermal equilibrium191. When the light within the cavity is driven to a critical photon number, a laser-like response emerges in the lowest energetic mode that overlaps with the spectral response of the gain material. It has been shown that this response closely follows a Bose–Einstein distribution, with the laser transition being analogous to the condensation of the cavity photons.

    Even though such analogies between laser action and BECs are compelling, their primary utility lies in the ability to employ the highly successful machinery of thermodynamics and statistical mechanics to understand the interactions of laser modes66, 126. The two fields have much to offer each other: statistical mechanics can be used to describe complex mode competition in lasers, while photonic BECs can be produced far more rapidly than atomic BECs and at room temperature. One exciting possibility stems from reducing the size of a photonic BEC: just as the threshold of a nanolaser is reduced through miniaturization, so too is that of a photonic BEC. In terms of statistical mechanics, this also results in a reduction of the number of photons within the BEC. To date, a photon BEC has been demonstrated with just 7 photons189.

  • Conventional macroscopic optical cavities require stimulated emission of the required optical modes if they are to be isolated from unwanted modes. Indeed, for lasers larger than the wavelength of the light, this is the only means by which such mode control is possible, as all modes share spontaneous emission approximately equally. However, nanocavities can exploit the Purcell effect, completely changing the equal distribution of spontaneous emission among the modes. Indeed, this is the method by which nanocavities may achieve β → 1. This raises the question of whether stimulated emission is required at all. Some may argue that lasers are faster than LEDs, but the Purcell effect improves the situation here as well. In fact, nano-LEDs may well be just as effective as nanolasers from an energy conversion point of view192. However, nano-LEDs and nanolasers will still have different photon statistics and noise properties69. For applications in which noise is not an issue, nano-LEDs may suffice. Another issue of concern for nano-LEDs could be limited emission power due to the lower excitation level of the gain materials.

  • Finally, one of the most promising applications of spasers is their novel use for on-chip optical interconnects99, beyond what has already been discussed for conventional optical interconnects8 This proposed application, which has not yet been demonstrated experimentally, can resolve the most important problems of electronic information processing: the limited clock rate of a processor (realistically, not exceeding several GHz) and high heat production. Both of these drawbacks originate from the same fundamental physics: the coupling between the transistors on a processor chip is electrostatic. When a transistor flops its state, the interconnect must be recharged by the current from a single transistor, which requires a long time and releases electrostatic energy as heat. However, a fundamentally different principle has been formulated99 based on the use of SPPs to bring a signal from one transistor to another. In this case, a transmitting transistor electrically pumps a spaser that has the same ~10 nm size as the transistor. The spaser is loaded by an SPP waveguide (for this purpose, the same type of copper interconnect as is used for the current electrical interconnects can be applied). On the other side, the SPP pulse is converted into a charge by a germanium nanocrystal and fed to the receiving transistor. It has been shown193 that a single nanoscale transistor produces sufficient drive current to electrically pump a spaser. Thus, this principle of spaser-mediated SPP interconnects is fundamentally realistic and, indeed, very promising.

  • In this paper, we have attempted to present an overview of the field of nanolasers and spasers over the last 10 years, since the first experimental demonstrations in 200934-36. The paper started with a brief historical overview of laser miniaturization, which eventually led to the design and first demonstrations of plasmonic nanolasers and spasers. This was followed by a summary of the fundamental properties of spasers. An overview of physics- and technology-driven motivations for small lasers was then presented; these motivations include developing a nanoscale coherent source, controlling and reducing the lasing threshold, accelerating the time dynamics of lasers for application in information transmission, and the loss-gain trade-off. The significant progress achieved in the development of spasers and nanolasers over the last 10 years was then described. The critical advancements include continuous threshold reduction, electrically injected operation, raising the operating temperature, improving quantum efficiency, progress in the capabilities of the originally developed single-particle spasers, the capability of array operation of plasmonic emitters, and multiphysics modeling and simulation. The final part of this paper presented our perspectives on the field, highlighting several important future directions of fundamental and applied research. These directions include addressing the critical question of the ultimate dimensions of a plasmonic nanolaser, both in principle and in practice, especially considering the possibility of electric injection; a new possibility of miniaturizing Bose–Einstein condensates; controlling spontaneous vs. stimulated emission; and finally, the relative merits of lasers at the ultimate small scales. Some of these and related unresolved issues and future perspectives have also recently been presented elsewhere8. We believe that future research towards achieving these goals and resolving these fundamental problems will further deepen our comprehensive understanding of the physics of interactions between photons, plasmons, and matter and broaden the applications of plasmonic nanolasers and spasers.

  • S.I.A. and A.V.K. acknowledge financial support from the DARPA/DSO Extreme Optics and Imaging (EXTREME) Program (Award HR00111720032). V.M.S. acknowledges financial support from AFOSR Grant FA9550-18-1-0002. R.-M.M. is supported by the National Natural Science Foundation of China (Grant Nos. 91950115, 11774014, and 61521004), the Beijing Natural Science Foundation (Grant No. Z180011), and the National Key R & D Program of China (Grant No. 2018YFA0704401). R.O. is supported by the "UK Engineering and Physical Sciences Research Council". C.-Z.N. and J.-L.X. acknowledge support from the Beijing Innovation Centre for Future Chips at Tsinghua University. Major funding for MIS was provided by Grant No. DE-SC0007043 from the Materials Sciences and Engineering Division of the Office of the Basic Energy Sciences, Office of Science, U.S. Department of Energy, whereas numerical simulations were performed using support from Grant No. DE-FG02-01ER15213 from the Chemical Sciences, Biosciences and Geosciences Division, Office of Basic Energy Sciences, Office of Science, US Department of Energy. Additional support for MIS came from NSF EFRI NewLAW Grant EFMA-17 41691 and MURI Grant No. N00014-17-1-2588 from the Office of Naval Research (ONR).

Conflict of interest
  • The authors declare that they have no conflict of interest.

  • Reference (193)



      DownLoad:  Full-Size Img PowerPoint