Author Correction: Miniaturising artificial compound eyes based on advanced micronanofabrication techniques

Lin Zhu; Yong-Lai Zhang; Hong-Bo Sun

doi:10.37188/lam.2021.012

PDF
Cite
Share

facebook

twitter

google

linkedin

Volume 2 Issue 1

Article Contents

Rights and permissions

Light: Advanced Manufacturing > Published> Author Correction> 2021, 2(1)

Citation:

Author Correction: Miniaturising artificial compound eyes based on advanced micronanofabrication techniques

Lin Zhu ^{1
,} ,
Yong-Lai Zhang ^{1
, ^*
,
,} ,
Hong-Bo Sun ^{2
, ^*
,
,}

Light: Advanced Manufacturing 2, Article number: (2021)

More Information

1.
State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 130012 Changchun, China
2.
State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instrument, Tsinghua University, 100084 Beijing, China

Corresponding author:
Yong-Lai Zhang (yonglaizhang@jlu.edu.cn); Hong-Bo Sun (hbsun@tsinghua.edu.cn)
0
Published online: 18 March 2021

doi: https://doi.org/10.37188/lam.2021.012

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article′s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article′s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(1)

Get Citation

PDF

XML

Article Metrics

Article views(1663) PDF downloads(388) Citation(0) Citation counts are provided from Web of Science. The counts may vary by service, and are reliant on the availability of their data.

Author Correction: Miniaturising artificial compound eyes based on advanced micronanofabrication techniques

Light: Advanced Manufacturing 2, Article number: (2021)

1. State Key Laboratory of Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 130012 Changchun, China
2. State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instrument, Tsinghua University, 100084 Beijing, China

Corresponding author:
Yong-Lai Zhang, yonglaizhang@jlu.edu.cn;

Hong-Bo Sun, hbsun@tsinghua.edu.cn

Published online: 18 March 2021

doi: https://doi.org/10.37188/lam.2021.012

HTML

Correction to: Light: Advanced Manufacturing

https://doi.org/10.37188/lam.2021.007

published online 25 February 2021

In the version of this article originally published, the title “Wettability controlled microdroplets” and “Microdroplet jetting” in Figure 1 have been misplaced, they should be switched, as shown in Fig. C1.

Fig. C1 The figure is the corrected version for Fig. 1 in the original article.

We would like to apologize for any inconvenience this may have caused.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article′s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article′s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.